Featured Products

Connector, IC socket. 6 Dip. Low profile. Learn More

Hardware, kit. Tinnerman mounting kit. Each contains Eight #8 x 1-1/2" Philips screws and Eight 8A Tinnerman N. Snaps over edge of panels or into center hole locations. Holds itself in place for blind assembly. "Floats" free for easy alignment. Tinnerman nuts are used to replace threaded nuts, lock washers, and spanner washers; lighter than other types of self-locking aircraft fasteners. Install quicker, easier, and are vibration resistant. Give maximum holding power at minimum cost per fastener. Turned-up ends prevent scoring of surfaces. Alternate: A1348-8Z-1D. Learn More

Crystal. 11MHz. Package: SMD metal. Learn More

Diode. House numbered. Possibly 125Amp. Sold as is. Double marked 05801101-9759. Learn More

Hardware, washer. Polypropylene. Dimensions: 0.75" D x 1/32" thick, with an ID of 0.06" D. Package of 30. Learn More

Universal - Adjustable Deluxe Pin Switch, Normally Closed (NC). 

Code Alarm Pin Switch

• Applicable models for cars, trucks, RVs, off-road vehicles adapted models for motor vehicle hood
• Hood trunk door pin uses: Car hood intrusion switch / auto switch trunk notice
• Door plunger switch alarm auto hood pin with adjustbale screw length,easy operation
• Durable material: Made of environmental protection iron, plastic materials,can use long time with great touch
• Plastic top design,designed for car domelight/ hood intrusion switch/ auto switch trunk notice

Dimensions: Length 70MM or 2.75", Screw Length: 35MM or 1.37"

 1/4-20 Threaded Body.

Rating: 20A, 12VDC

Connection: 0.25" Quick Connect on the bottom.

The spring slides smoothly and has a long service life.

Operation: When depressed, it breaks open the circuit.

Comes with 2 nuts and lock nut for adjusting the depth.

Actuator: Nylon.

Switch Housing Material: Anodized Steel

Applications: Alarm Systems, Home Security, Dome Light, Door Jam, Hood Intrusion, Trunk, Bonnet Notice.

Alternates: HDPS5, AMZegal49042, A0480-2, ASCZOV

Package of 4.

Learn More

Transistor, PNP. Max voltage: 100V. Max current: 600mA. Dissipation: 1.5 watt. Package: TO-92 plastic, metal or gold leads. P/N: MPSL51. Note: Silicon. New. Learn More

Turrett Pins possibly gold plated Overall 14.4mm long Learn More

Diode. High Voltage. Package: molded body, axial leads. Dimensions: 3.2mm x 3.5mm x 11.0mm long. Note: Tarnished. Learn More

P6KE8V2C -Diode. TVS, Transient Voltage Suppressor.

Voltage: 8.2V.

Dissipation: 1 watt, 600 watt peak.

Package: DO-204AC.

Learn More

VP1091-2 Retractable 2 Conductor Coiled Curly Cord / Power Cord.

This Cable is great for low power applications where flexibility is needed, such as Small Power Tools, Cigarette Lighter Cables (Power Point), robotics, or light duty AC power applications.

Upgrade Power Adapter Cable - Common barrel connector size used on numerous Power Adapters. 

24 AWG 2Conductor

Coiled with a 5.5mm OD (2.4mm ID) Barrel Connector

Female Right Angle Connector

Two Different Color Insulated Leads

Black PVC Jacket

Cable Outer Diameter 0.150" (3.8MM)

Inner Wires approximately 0.050" Diameter

Outer Insulation is approximately 0.050 Thick

2 Conductor Cord Stretches up to 3 feet.

New Old Stock

Applications: Home, Auto, Project, CB microphone, Power Adapter, Chargers, etc...

Learn More

VANCO - TNC14X Coaxial Cable.

The interface specifications for the TNC and many other connectors are referenced in MIL-STD-348. The connector has a 50 Ω impedanc and operates best in the 0–11 GH frequency spectrum. It has better performance than the BNC connector at microwave frequencies. 

50 Ohm RG-58U (RG58 RG58U) Coaxial Cable with a TNC Male Connector.

Voltage Rating: 500 Volts Peak

Dielectric withstanding Voltage: 1500 Volts RMS

Insulation Resistance: 5000 MOhm Minimum

Power Handling: 316 W 1Ghz @25 C

Temperature Range: -65 C to +165 C

Crimp TNC Coupling Interface ensures connector with not de-couple in vibration-intense applications.

Straight TNC Male Connector Plug on one end.

Materials: Teflon Insulator, Brass Body with Nickel Plating, Gold Plated Contact.

Attachment Method: Crimp/Solder

Length: 14 Foot Long.

Learn More

Tube, microwave electron. 10GHz. Military NSN 5960-00-776-5477. New. Learn More

Pulls 11.98947MHZ crystals cut leads 1/4" Learn More

IC, military. Manufactures specifications unknown. Package: TO-99-6 gold leads. Learn More

Voltage regulator. Package: thick film hybrid SIP. Note: Listed as Generic/Unmarked, possibly a Sanyo product. Learn More

Transistor, NPN. Max voltage: 1500V. Max current: 7Amp. Dissipation: 50 watt. Package: TO-3 heavy steel. P/N: SK3115. Note: Silicon. High Voltage. Learn More

AMP - Lug005 - Solderless Terminals.

Connector, solderless terminal.

Contact gender: Female 1/8" Quick Connect (QC).

Uninsulated.

Material: Brass, Tin Plated

Mounting Type: Wire, Crimp.

Wire Gauge: 18 - 22 AWG

Mounting Type: Free Hanging

Dimensions: 3.8mm OD x overall 16.1mm Long (0.633").

Female is actually 6.5mm long.

Alternates: TE Connectivity 140717-2, 140825-2, 140716-2, 62050-2, 150346-2

Package: Cut Tap

Package of 25.

Learn More

Copal - RD0026 - Copal Shutter Assembly with reflex viewing system.

Copal brand shutters were supplied by all the major view camera lens manufacturers with their lenses. These excellent quality shutters had been made virtually unchanged for over twenty years by Nidec Copal Corp, Tokyo, Japan.

Expertly crafted "Guillotine Copal Shutter" with a special bayonet lens mount measuring about 1.5" ID.

Could have been used for a high speed electronic (oscillographic) motioncapture system or vidicon camera front end. The whole assembly is approx 2-1/2" square and has two motors, a 0.60" dia 4-wire stepper w/gear and a Namiki high effciemcy PM motor, less than 1/2" in dia, which could opperate from a single solar cell. The optics include a single surface mirror with reflex prism. Micro gears and dozens of miniature metric screw, etc.

New Old Stock

Learn More

LED. 10mA. Lens: round. Size: 10mm. Color: green. Learn More

Connector, relay socket. For 2PDT. Witt fit Potter & Brumfield R10 series and or Magnecraft W67RC. Contacts: 8 solder terminals. Package of 5. Learn More

Hardware. Wire nut and slice set. Package of 25. Learn More

Hardware, grommet. For 1/8" panel. Dimensions: 1.25" O.D. x 5/8" I.D. Learn More

PT-460 - Hardware, Heatsink.

Channel Board Level heat sinks designed to cool TO‐220 single gauge devices

For TO-220 components.

Stamped Heat Sink

Material: Tin Plated Bright Aluminum.

Two tabs for PC mounting 0.50" apart.

Dimensions: 0.75" x 0.33" x 0.93" High.

Alternate/Similar: AAVID 7173DG, 575002D00000G

Learn More