Featured Products

Hardware, Threaded Ceramic Spacer.

Excellent mechanical strength, chemical erosion resistance, high wear/abrasion resistance and electrical isolation characteristics make these standoff insulators economical and practical for many applications.

Material: Ceramic.

Exceptional strength in compression and tension.

Electrically Insulated and withstands High Temperatures (50 to 1700 F).

Threaded for 8/32 screw on one end .50" deep.

Radii on all edges.

Overall Dimensions: 0.5" OD x 1.5" Long. (12.7 X 38.1 mm). 

Project Applications: Electronics, Mounting, Isolating. 

Similar to Cat No. 7673 but threaded only on one side. 

Learn More

Hardware, idiot plug. 1/2" hole plug. Material: metal, chrome plated. Package of 25. Learn More

Hardware, spacer. Material: brass/copper, heavy. Dimensions: 1" x 3/4" x 1/3". Weight: 1.3 oz each. Learn More

Hardware, grommet. Material: heavy rubber. Dimensions: 32.6mm D x 10.5mm high with an ID of 17.0mm. Side area for 2.7mm thick panel. Package of 10. Learn More

Hardware, grommet. Material: heavy rubber. Dimensions: 20.7mm D x 9.2mm high with an ID of 9.2mm. Side area for 3.0mm thick panel. Package of 10. Learn More

PT-084 Hardware, Timing Pulley. COG.

Smooth transmission, with buffering and vibration reduction capabilities, and low noise.

Easy maintenance, no need for lubrication, low maintenance cost.

Material: Nylon White.

Press-Fit, Two Flange Design

Dimensions: Overall 0.518" (13.1mm) Diameter x 0.305" (7.7mm) wide

Shaft: 0.191" (4.8mm) Diameter (ID of pulley).

Will support timing belt 0.214" (5.4mm) maximim width.

Note: Cogged.

Applications: Light Duty Forward & Reverse movement

New Old Stock

Learn More

Hardware, cable clamp. Three fourths circle 0.6" ID wide x 0.65" high. Material: steel. Mounting hole stud size 8. Dimensions: overall 1.465" wide x 1/4" deep. Note: maybe mounted side-by-side to form wider cable clamps. Package of 20. Learn More

AAVID Thermalloy - 5759 - 575903800000G - Hardware, Heatsink.

For Use with TO-3 Components.

Aluminum With Black Anodized Coating

Thermal Resistance: 9.80

Overall Dimenasions: 1.630" X 1.290" X 1.250"

12 Fins, 0.092" thick.

Two mounting holes 1.187" (30.15mm)  centers.

Overall dimensions: W 1.290" x L 1.630" x H 1.250" (32.77mm X 41.40mm X 31.75mm)

Learn More

Idiot plug. Material: plastic. Dimensions: for hole 0.868" (22.0mm) D round. Mount: panel, snap in. Color: black. Package of 10. Learn More

Magnet. Dimensions: 3.5" x 1/2" x 1/16" thick. Mount: easy-to-install adhesive on one side. Package of 25. Learn More

MS-292 - Connector Contacts.

Matched Molex style - pin set, Male and Female contacts.

Connection: Crimp.

Outside dimensions: Overall 4.1mm D x 33.4mm long male, 3.9mm D x 30.5mm female. 55mm long when joined.

Actual contact is 8.7mm joined.

Package of 10 each.

Learn More

Unidentified MFG - MS-225 - Hardware, Electrical Power Enclosure, Project Box, 3 x 2 x 2.5". Wall Mount Hardware, Enclosure. For Two, 3 Prong Snap-in Female Power Output Receptacles (Purchased Separately – Not Included). Rear Panel Removable. Does have one 3 Prong 120 VAC Male Ground Power Input. Dimensions: 3" x 2" x 2-1/2". Perfect for EMI/RF Filter Box or Switch Box. Color: Beige. Learn More

Magnets, business card size. Self-adhesive. Note: New, older stock. Package of 25. Learn More

MS-043 - Hardware, Speed Nut / Retaining Ring.

Also known as flat-style speed nuts, these have a large surface to distribute loads better than standard and flanged external push rings. Use them on unhardened shafts that are softer than the push ring. The ring bites into the metal to form an interference grip. Spring nut provides the correct amount of spring tension without damaging surfaces. Eliminates the need for lockwashers and spanners. For use with threaded screws and studs. Reusable. Nut surface accepts paint without clogging.

Threaded Fasteners for Holding Products/Items Approximately 0.25" in panels (1/4").

IE: Lamps, Miniature Jacks, etc.

Dimensions: 0.625" Long x 0.437" Wide. (5/8" X 7/16")

ID is 0.261" x 0.282".

Propertise: Magnetic,Spring Steel

Package of 50.

Alternate: 90528A12

New Old Stock

 

Learn More

Hardware. Strap Handle,

Durable but Flexible Soft Plastic with Metal End Caps and Cover Hardware.

Approximate Overall Length: 7"

Applications: Tool Shop, Crafts, Sport Equipment, Storage Containers.

New Old Stock

Learn More

Relay, AC. 115VAC coil 1350 Ohm resistive 10 Amp. Tolerance: 10%. 10A @ 29VDC. Used/Removed from equipment. Learn More

Connector, terminal block. Circuit count: 20 Position (Single). Mounting type: PCB or panel, thru hole leads 0.108" wide x 0.048" thick x 0.675" long from base. Connection: screw. Outside dimensions: 9-9/16" long x 0.770" wide (including leads) x 0.519" high. Note: Black. Marked K699. Learn More

TS20-02 - 912-20 - Connector, Terminal Block / Terminal Strip, 3 Tabs per Position, 20 Position.

Base Material: Phenolic

Circuit Count: 20 Position, Rivet Construction.

Mounting Type: Panel, Flush.

Connection: Side One Has Twenty Vertical 1/4" Male Quick Connect Terminals.

Side Two: Has 20 Vertical 1/4" Male Quick Connect Terminals, and an Additional 20 More at 45 Degrees.

Contact Material: Brass, Tin Plated

Contact Style: KT75 and KT80

Outside Dimensions: 9-9/16" Long x 0.694" Wide x 0.540" High.

Overall Width with Contacts is 0.811" Wide.

Overall Height with Contacts is 0.804" High.

Alternate: Marathon Kulka 912 GP 20

Note: Black.

Learn More

Connector, terminal block. Circuit count: 14 position. Mounting type: thru board. Connection: one side has (14) 1/4" (M) RA contacts. Outside dimensions: Overall 6" long x 1" wide. Learn More

Connector, terminal block. Circuit count: 10 Position (Single). Mounting type: PCB. Connection: Top screw, lower turret posts. Outside dimensions: 4.398" long x 0.709" wide x 0.573" high. Two mount holes at 4.104" centers. Note: Used/Removed from equipment. Learn More

Connector, terminal block. Circuit count: 10 Position (Single). Contact ampacity: 20Amp max. Insulation voltage: 300V. Mounting type: PCB. Connection: Top screw, lower PC pins. Outside dimensions: 4.539" long x 0.634" wide x 0.768" high. Note: Black. Listed CSA. Learn More

- TS10-06 - Connector, Terminal Strip/Block.

10 Position, Barrier Type.

Single row inline. One side has (10) 1/4" Male Quick Connect Terminals.

300V, 25A

Mount: Flush.

New Old Stock

Learn More

Connector, terminal strip. 7 Position, single row. Mount: PCB through hole, on plastic mount. With 2 holes at 2.2" centers. Dimensions: 1.160" wide x 2.567" long. Learn More

Connector, terminal block. Contact gender: 10 x 2. Four hole mount: 3.60" centers. Pin spacing: 0.375" (9.5mm). Outside dimensions: 3.896" long x 1.135" wide x 0.743" high w/o rear connector. Note: With 20 pin IDC male ejector-latch header on rear. Learn More