Featured Products

LAES Lamps & Lights. 230V 60 Watt.

Mini Spot Lamp with a Candelabra base.

Reflector Lamp.

L8.

Manufactured in European Union.

Learn More

Mill-Max - LTO318TBB - Connector, IC Socket.

18 Dip. ST.

Mount: PCB.

Dimensions: 22.8mm long x 9.9mm wide x 3.9mm high.

Lead Spacing: 2.3mm.

Color: Black.

Package of 26, one new manufacture tube.

Learn More

LED. 1.8VDC - 2.5VDC, approximately 100mA. Polarized bi-pin. Dimensions: flat package, 4mm wide x 1.3mm deep x 4.5mm high. Lens: amber lens. Emitting color: red. Learn More

Transistor, NPN. Max voltage: 15VCEO, 30VCBO. Max current: 0.05Amp. Dissipation: 0.25 watt. Package: TO-92, plastic. P/N: SK3293. Note: Silicon. Learn More

Diode. FWB, full wave bridge rectifier. 1.5Amp 1000V Peak repetitive reverse, 700V RMS input, 1000V DC reverse. 1PH. Package: glass passivated silicon round 4 leads. Learn More

VALIDYNE - DP45-16-2114 - Gould 369500-57035 - Transducer, Low Differential Pressure.

The Validyne DP45 Very Low Differential Pressure Transducer is designed for extremely low pressure measurement in the order of ±1 inch water column. This instrument is used extensively in connection with flow measurements where dynamic response at low flow rates is required. Dynamic line pressure effects are minimized due to the combination of low internal volume, symmetrical construction, and small volumetric displacement inherent in the DP45 design.

All surfaces exposed to the media are corrosion resistant steel. The design and construction of the DP45 permits the user to disassemble the instrument for cleaning, diaphragm replacement, or changing the transducer range. The transducer range is changed by substituting a different sensing diaphragm chosen from the Diaphragm Selection Chart on the reverse side of this sheet.

Used with a typical Validyne carrier demodulator, pressure inputs as low as 0.6 in. H2O will produce up to a ±10V output. The exceptionally low acceleration sensitivity of the DP45 ensure accuracy under all types of mounting conditions.

• Low range: ±0.6 to 90 in.H2O FS
• Low internal volume
• Symmetrical construction
• Small volumetric displacement
• High natural frequency

3.5CM.

Electrical Connector PT06A-10-6S

Mounting: Three Holes 6-32unc-28X.20 Deep ON 1.75- Diameter.

Dimensions: 57mm Diameter (2.24")

Additional Information https://www.validyne.com/product/dp45_low_pressure_variable_reluctance_sensor/

Alternate P/N: Gould 369500-57035.

Made in USA - Factory New With Specifications & Installation Drawing

Learn More

Connector, SMB. Female SMB to RG174 coax crimp. Material: gold plated. Learn More

VANCO - CBC3PX - Connector, Audio.

Housing Gender: Plug.

Contact Gender: Male.

Connection: Solder Terminals

CB Jack/Microphone.

Circuit Count: 3 Pin.

Mounting Type: Panel.

Includes Back-up Nut

Durable All Metal Construction

UPC 741835003964.

Learn More

L-Coms - KJ8-25P - RA258M - Communications Products.

Simplify serial data connections by substituting in L-com's economical D-sub to modular adapter kits. Each unit is programmable to your needs by simply inserting the prepared flying leads into the appropriate positions and snapping the connector in place. Designed with all the popular RJ style jacks and D-Sub connectors, these kits are perfect for field technicians who must determine wiring needs, or to use temporarily while waiting for a permanent cable assembly. L-com's unique custom pinning option allows you to let us do the pinning for you with modest minimums. Contact us today with your requirements and start saving money today!

Modular Adapter, DB25 Male / 8 Pin Modular Jack

Male DB 25 Pin Socket D Connector to KJ8 phone jack.

Complete with Plastic Hood.

Alternate: RA258M

Learn More

Hardware, set screws. Allen head 6/32 x 0.185" long. Material: steel. Package of 100. Learn More

Connectors, solderless terminals. Insulated spade for #6 screw. Wire size: 18-22AWG. Color: red. Package of 100. Learn More

UNI9-7 - Universal Starter Starter Solenoid Relay Assembly, 3-Terminal.

Coil Voltage: 12VDC

SPST Normally Open Contact

Coil Resistance: 4 ohms,

Coil Current: 3 Amps, Momentary Duty.

Two Large Copper Contactor Terminals: 5/16-24,

Single Coil Terminal: 10/32

Grounded Case/Base.

Heavy Duty 

One side of coil internally connected to integral mounting bracket, very high resemblance to those used in Ford Automobiles, Trucks, Tractors, and/or Marine. Replacement Solenoid for Oliver Tractors, Indust/Construction, International Harvester, & Allis Chamers applications.

Learn More

Diode. Unmarked signal diodes, no manufacture and no date codes.Case: axial leads. Package of 5. Learn More

Unidentified MFG - TRANSISTOR1 Transistor.

Unmarked. Unknown specification, sold as is.

Package: TO-18 gold, red test dots.

Package of 50.

Learn More

Connectors, audio. Miniature 3 pin female XLR connector. Mount: cable end. Package of 5. Learn More

LED. Lens size: T1-3/4, 5mm. Color: green. Package of 25. Learn More

Connector, header. Rectangular. Enclosed 5 Pin male. Mount: PCB/Vertical mount. Housing material: plastic, white. Pins are metal. Dimensions: 15.1mm wide x 5.8mm deep x 7.1mm high. Lead spacing: 2.7mm. Learn More

Unidentified MFG - TS09-001 - Connector, Terminal / Barrier Strip.

Dual 9 Position (9 x 2).

Dimensions. 4" long x 5/8" wide.

Learn More

Keystone - 1955 - Hardware, Spacer.

Hex 1-1/4" Long x 1/4" OD.

Threaded 6/32 Internal and 6/32 External.

Material: Nickel Plated (QQ-N-290) Yellow Brass. (ASTM-B16

Application: Printed Circuit Board Separation.

 

Learn More

Connector, D-Sub. DB15 Hood only. Complete with hardware. Learn More

Transformer, audio, Primary: 280 Ohm. Secondary: 50 Ohm CT. Mount: panel/chassis. Dimensions: 1" square x 1-1/3" high. Used/Removed from equipment. Learn More

Transformer, audio. Primary: 280 Ohm. Dual secondaries: each 50 Ohm CT. Mount: panel/chassis. Dimensions: 1" square x 1-1/3" high. Used. Learn More

Ching Cheng - EL451A - E88446/LL61597 - SPT-1 Power cords & receptacles.

18-2C (18 AWG).

SPT-1 Line Cord (Insulation thickness 0.030").

Type: LL61597.

Color: Black

Temperature: 60D.

Length: 69".

Rohs/CSA Rated

Learn More

Microphone Element for Telephones.

Dimensions: 1.257" D x 0.180" High.

Overall 0.412" Deep.

Note: Each with a clear plastic protective cover, overall 1.539" D x 0.37" deep, with threaded ID.

Learn More