Featured Products

Western Electric - L4BY-03-10C - Telecom.

Telephone system, stretch phone patch cord with WE-464A dual 1/4" plugs and 8' coiled stretch cord to WE-240A belt clip with locking switch with another 3' cord with four conductors, black.

Genuine Vintage Western Electric - New Old Stock

No phone or headset included.

Learn More

Western Electric - 440-201 Telephone Earpiece Receiver.

Magnetic Low Impedance (Low-Z).

Genuine (WE) Western Electric Vintage Replacement for Handsets.

Dimensions: 52mm D x 20mm deep with two screw terminals.

Color: Black Bakelite.

Genuine Vintage Western Electric Earpiece - New Old Stock.

Dimensions: 2.044" Diameter x 0.78 Depth, Inner Diameter Tapers down to 1.37" 

Connections: 2 Compression Screws

Mounting" Possibly by 2 Small Holes Approximately 0.085" Diameter 180 Degrees Across (See Picture 4).

Made in USA

Learn More

SHIELDED REED RELAY SPDT 0.01A 12VDC @10MA NEW PCB Mount1.441" (36.6mm) LONG x 0.449" (11.4mm) DEEP x 0.423" (10.7mm) HIGH Learn More

Westinghouse - 1479-0182 - Diode. Industrial High Current Diode.

Current: 75-100 Amp.

Voltage: 50V

Package: 3/8" - 24 Stud Mount with Heavy 3.5" Lead.

Genuine Vintage Westinghouse - New Old Stock - Very Rare

Learn More

Warner Electric / Superior Electric - KMT091F05E - Stepper, Dual-Shaft 3VDC 2.7A 200S/Rev Factory New Superior Electric is recognized worldwide as the leading manufacturer of step motor positioning systems. Over 40 years ago, Superior Electric developed and patented their SLO-SYN® Step Motor products. Today, SLO-SYN® step motors and drives are the industry standard providing reliable, accurate positioning for a wide range of applications. Status: Slo-Syn brand of stepper and synchronous motors. The company, formerly Superior Electric and now owned by Kollmorgen. Type: Motor, Stepper, Dual-Shaft, KM Series High Torque. Supply: 3.0VDC Current: 2.7A. Impedance Protected Steps: 200 Steps per Rev., Full Step Angle: 1.8° Direction: Reversible. Wire Count: Internal-connections 4- Wire. Mech. Mtg.: 90mm Frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D Double Flat and one 0.375"D keyed. Connect per 213803. Two-phase, Single Stack. Holding Torque: 385 oz-in (272 Ncm) Rotor Inertia: 0.016 oz-in (1.13 kg-cm) Weight: 5 lbs. Warner Electric / Superior UL Approved Made in USA Factory New and Factory Packaging Additional Information: https://www.kollmorgen.com/sites/default/files/public_downloads/Old%20Stepper%20Catalog_Superior%20Electric_0.pdf Learn More

Western Electric - 2-Y - SWBD - Panel / Switchboard Lamp

Slide Base Indicator Lamp, Carbon Filament

Miniature Telephone Light Bulb

Voltage/Current: 48V, 30-42mA

Lamp Diameter: 0.3075"

Used with Nos. 12, 13, 30, 34, 49, 50 or similar type lamp sockets

Genuine Western Electric - Factory Vintage New Old Stock

Made in USA

Priced per Bulb

Learn More

Weidmuller - 102450 - 1024500000 Terminal/Barrier Strip. Feed-Through 4 Position 

Allen Head, WM, BG265Amp 600V AWG:2 to MCM250.

Dimensions: 1.28 x 5.25 x 4.63"H.

Din Rail Mounting.

Approvals: UL CE 1.3 Lbs. WDU120

Made in Germany

Learn More

Resistor, ceramic. Resistance: 0.625 Ohm. Power: 295 Watt. Ribbed. Technology: wirewound. Enamel coated. Dimensions: 0.950" D x 10" long with an ID of 0.580". Learn More

WARD LEONARD - RWR175W0.6 - Resistor, Ceramic.

Resistance: 0.6 Ohm.

Power: 175 watt.

Ribbed. 

Technology: Wirewound.

Enamel coated.

Dimensions: 0.950" D x 5-11/16" long.

Radial lugs with screws.

Learn More

Western Electric - 2-83 - Transformer, telephone.

Mount: Panel with 2 holes at 2" centers.

Dimensions: 1.311" long x 1.548" wide x 1.574" high.

Contacts: screw.

ote: Marked 151B AMPL.

New older stock.

Learn More

Transformer, telephone. Similar to a Ferrite inductor. Mount: PCB 9 leads. No housing. Dimensions: 1.111" long x 0.656" wide x 1.010" above board. Note: New older stock. Learn More

Western Electric - 241A Switchgear Connector.

Dual Mono Male Plugs, 1/4" (6.35mm) 

Material: Heavy Duty Solid Brass.

Screw Terminals - Brass "T" Cable Clamp.

Authentic Vintage Western Electric - New Old stock

Alternate: 100395235

Complete with hardware.

Learn More

INDUCTOR (10 TER. ON BOTTOM) Learn More

WATLOW - G1JX93A - FIREROD Cartridge Heater. Heating Element 115 VAC 300 Watt.

The FIREROD cartridge heater revolutionized the heating element industry in 1954 when it was patented as the first swaged cartridge heater. The mechanical procedure of swaging reduces the diameter of the heater by compacting the unit; this directly improves the heat transfer and efficiency of the heater. FIREROD cartridge heaters are built using only the finest materials and construction methods and are backed with extensive quality assurance programs. With premium materials and tight manufacturing controls, the FIREROD heater provides superior heat transfer, uniform temperatures, resistance to oxidation and corrosion and a long life even at high temperatures. FIREROD offers many delivery programs to meet your needs.

The Watlow FIREROD heater revolutionized the heating element when it was introduced. With premium materials and tight manufacturing controls, it continues to provide superior heat transfer, uniform temperatures, and resistance to oxidation and corrosion even at high temperatures.

Incoloy 800 provides high temperature resistance to oxidation and corrosion, proving far superior to 304 stainless steel alloys used by other manufacturers.

Voltage: 115VAC

Power: 300 Watt 

Current: 2.6 Amp

Dimensions: 9.4mm (0.370" ) Diameter x 37.1mm (1.464") Long

Swaged in 2 Radial Leads, Lead1 = 4.5" Long, Lead 2 = 6.5" Long.

Typical Applications: Semiconductor chamber heating, Semiconductor wire and die bonding, Freeze protection and deicing of equipment in cold climates or applications, Humidity control, Patient comfort heating used in medical devices, Mold die and platen heating, Seal bars used in packaging equipment and Test sample heating in gas chromatography equipment.

Made in USA

Learn More

18-32VDC DPDT 1/2-crystal can Miniature Coax Relay 700-OhmHermetically Sealed - Presoldered with 6- teflon coaxial leads 7" long0.42 x 0.8" x 1.27"L with terminations Learn More

Waldom/Molex - 3191-15R1 - 19-09-1156  -Connector, Rectangular.

2.36mm Diameter Standard .093" Pin and Socket Receptacle Housing with Positive

15 Position (5x3 row) housing.

Gender: Female.

Standard 0.093".

Material: Nylon.

Mount: Panel.

Color: Natural.

Note: Contacts purchased separately.

Learn More

2VDC@10A-Output - 12VDC@30WATTS Input DC/DC 2.3"x2.3"x0.75"HCONT OPERATION 9-MODULE W/GROUNDING BASEPLATEFUSE REQ 8A 60V Learn More

VICOR - VI-BN3-CV/B1 48VDC TO 24VDC DC/DC Converter

With Trim and Remote Sensing

Dimensions: 4-5/8" X 2-3/8" x 1"

200W-Max-Input

Learn More

Connector, rectangular. Housing gender: receptacle. Contact gender: female. Circuit count: 12 Position (6 x 2) Housing only. Insulation material: Nylon, white. Mounting type: PCB, vertical. Pin spacing: 5.5mm. Note: Type: Shrouded. Alt P/N: 39-28-9128. Header. Learn More

Diode. 100V 250mA 370mw for high speed applications. Package: SMD T/R. Note: silicon. Package of 50. Learn More

Thermistor. 10K ohm. SMD NTC 1012. Tolerance: +/-5%. Number of Pins: 2. Beta:3964K. Beta lower temperature: 25C. Beta upper temperature: 75C. Leaded process compatible and RoHS compliant. NTHS-1012N01 10K 5% E06 e3. Learn More

Wakefield Engineering - XX8340 - Hardware, heatsink. 12 Fin.

Wakefield-Vette has been in continuous operations since 1952, providing thermal solutions across multiple industries, from international Fortune 50 companies to small and medium sized businesses.

Material: Black Anodized Aluminum.

Dimensions: 4" long x 2.5" wide x 1-11/16" high.

Mounting surface: 1.25" long x 2.5" wide, one drilled hole centered and 11/16" from edge.

Two 4-40 mounting holes in edge face on 1.59" centers.

Additional Information: http://www.wakefield-vette.com/Portals/0/WFV2019_Catalog.pdf

 

Learn More

VERITAS - VCB-160 - Connector, din.

6 Position Male.

Standard Plug.

Package of 2.

Learn More

VERITAS - VCB-168 – Standard Connector, Din. Male 3 Pin. Package of 2. DIN connectors are round, with pins arranged in a circular pattern. The 3 Pin DIN Male Solder Connector is economic and lightweight. The plug comes in four parts and can be easily disassembled for access to the solder cups. The 3 Pin DIN Male Connector accepts up to 22 AWG wire. It is designed with molded strain relief and accepts cables up to 7mm. Housing Gender: Plug. Contact Gender: Male. Orientation: Straight, Cable Mount Ratings: 1A 100VAC Terminal: Pin Terminal Termination Type” Solder Operating Temperature: -20 C to 85 C Circuit Count: 3, 180° Strain Relief: Standard Molded Strain Relief Material: Thermal Plastic and Nickel Plated Brass Color: Gray, Thermal Plastic Alternate: Switchcraft 05GM3M New Old Stock – Difficult connector to find. Package of 2/per Manufactures card. Made in Japan - Quality component not a China import Applications: Audio, Video, Power Supply Learn More