Featured Products

STAINLESS STEEL SCREW Learn More

Unidentified MFG - PT-584 - TO-220

Bolt-On Mountable

Black Anodized Aluminum Heatsink

Dimensions: Overall 1.635" wide + 1"deep + 0.710" off board.

Alternates / Similar: ATS-PCBT1094, PSC2T2CB, PSC22CB, 574502B03200G, 574502B00000G, HSS-B20-NP-02, HSS-B20-074H

Learn More

3.745"W x 3.08"H x 0.60"Thick Six(6) Irregular sides, as measured from the Front Mirror side: 2.23" x 1.14" x 1.85" cross top x 1.5" x 2" down x 3.725" across. Sides and corners are Beveled. Top & Bottom are really flat. Learn More

Milling Tool Holder 18mm bore, 36mm SHANK, 18mm Bore. 5-1/4" Overall Length. Arbor. Learn More

Micrometer Head, 0-25mm metric. Graduations 0.01mm, with locknut. Approximately 4" long. Spherical tip. Maybe Mitoyo 148 Series. Learn More

HYBRID- LONG LOOP- ISC TYPE REV.A. 9-SIP Learn More

PLCC-PBT44G7P Connectors, IC Socket.

Through Hole- Solder

44 PLCC.

Visual and Mechanical Polarization for PXLCC Insertion

Accepts JEDEC PLCCs MO-047 and MO-052

Alternates: 806-PX-44LCC, 

Learn More

CD IR Laser diode & Lens assembly with 2 tiny motors and a gear assembly to move the laser diode assembly - removed from equipment - sold as is - about 4"x3"x2". (Replaced from P/N KSK1310A KSS240A KSM2401AA). Learn More

Unidentified MFG - TCO-D085 PRGR 87C - Thermal Cut-outs, Axial Leads

Thermal Cut-offs (also known as Thermal Fuses) are miniature, NON-RESETTABLE temperature sensitive devices designed to prevent appliances and electronic equipment from overheating. Thermal cutoffs are UL and CSA listed. Literally thousands of different applications have been devised for thermal-cutoffs, thus providing a large replacement market. Such applications include: Hair Dryers Refrigerators Battery Chargers Irons Hot Plates Glue Guns Electric Motors Window Fans Coffee Makers Microwave Ovens Popcorn Poppers Dishwashers And hundreds of others The TCO (Thermal Cut-Off) responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the device. This is accomplished when the internal organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit.

Trip Open Temperature: 87C / 188F

Maximum Current Rating: 15 Amps

Typical Opening Temperature Tolerance: +0°C, –4°C

18 Gauge Solid Copper Wire

Full 1 1/3” leads to fit all replacement configurations

Note 1: Temperature sensitive devices. Do not store above +48°C (+120°F).

Note 2: Color Band does not denote temperature group.

Note 3: The electrical resistance of the thermal cut–off is comparable to that found in an equal length of 18 gauge solid copper wire. With proper air flow, heat generation below 15 Amps is minimal, above 15Amps the upper limit on the currentcapacity will depend on the environment for each specific application.

Note 4: A general rule of thumb for continuous operating temperature for thermal cut–offs is 30°C less than the Maximum Opening Temperature.

TCO-D085 PRGR 87 C.

Alternate: NTE 8085

 

Learn More

100K MAX RESISTANCE PHOTORESISTOR8-OCTAL LG GLASS ANTIQUE Learn More

4 WAY CABLE SPLITTER (5-900MHZ) Learn More

TF-020215 Enclosure. Project box, without lid.

Dimensions: 1.85" long x 1.83" wide x 1.46" high.

Mounting ears each side.

Color: Black. No lids.

Learn More

Relay, sockets. For 4PDT 300V 10Amp relays. Number of contacts: 14 PC pins plus ground. Will fit Midtex 156 series. Mount: PCB. Learn More

Simple Microphone for PC Computer Laptop Notebook Desktop Skype Gaming Chatting.

Pick-up pattern: Omnidirectional

Design: Freestanding

Microfone Form Factor: Handhled/Stand Held

Connector: 3.5mm

Material: Plastic

 

 

 

Learn More

Connector, hoods. For DB15. Material: plastic. Color: black. Complete with hardware/cable clamp. Learn More

SMK - YM12 - Switch, Key.

SPDT, 3 access levels - Custom-made high quality key switch.

7 Position Master key or 3 Position Operation.

Contains two SPDT Switches

Mech: Panel.

Body: Overall 1.106" D x 2.103" deep, behind panel.

Two threaded mount holes at approximately 0.880" centers.

Note: Complete with four keys, two each Master and OP.

Keys are removable in only 2 positions, Master or OP.

Learn More

POWER SUPPLY -24VDC 50MA 1.2W & +5 VDC 2.5A 12.5W OUT115V 50W IN

Learn More

R-A101 Relay, DC.

Contacts: 2-Normally Closed, 1-Isolated Normally Open & 1 Ground Normally Closed or Normally Open.

Contact Ratings: 10Amp.

Coil Voltage: 9VDC.

Coil Resistance: 60 Ohm.

Mech Mtg: PCB, Open Frame.

New Old Stock

Learn More

PT-566 - Hardware, Spacers.

Stand-Offs/ Spacers.

Material: Nylon, Clear.

External 1/4-20 (9.5mm long) to Internal 6/32 Molded-In Brass Threaded Insert.

Overall 20.3mm Tall.

Body: 12.7mm D x 10.8mm tall.

Package of 10.

Learn More

Hardware, Grommet Package of 10.

Ideal for electrical insulation and mechanical damping.

Material: Rubber.

Appproximate Dimensions: 0.725" OD x 0.36" thick with 0.375" ID.

Mounting Hole: 0.50"

Appears to be made for upto a 0.12541" thick panel.

Alternate/Similar: Keystone 745

Package of 10.

Learn More

Hardware, spacers. Fiber board. Dimensions: 14.2mm long x 6.4mm D, 1.6mm thick with 3.4mm ID. Unthreaded. Package of 100. Learn More

Hardware, feet. Compression Stem Push-in Rubber Feet.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These foot/bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Shape: Round 

Diameter: 0.500", Overall Height: 0.340, Foot Height; 0.165" 

Fits: 1/4" Hole 

Also can serve as a bumper or idiot plug for 0.250" hole.

Material: Rubber.

Operating Temperature: -20 to 180 F

Reduces vibration, isolates and prevents movement.

Applications: Ideal for electronics cabinets, test equipment, enclosures, or projects.  

Package of 24.

Learn More

Hardware, Heatsink.

Status: Discontinued

Assembly consists of With (2) attached Hybrid Voltage Regulators, SH323KC TO-3 Steel, 2 Bridge Rectifiers, TO-3 Sockets, TO-3 Insulator Caps, Large Heat Sink.

Positive 5V 3Amp 50Watt.

Overload Protected

Internal Short Circuit Protection

Material: Nice Black Anodized Aluminum 

Heat Sink Dimensions: 6-1/2" x 3-3/4".

Used/Removed from New Old Stock Chromascan Equipment.

Alternates: NTE931, LM323K, SK9067, SG323

Applications: Great parts for Regulator Projects 

Learn More

PT-388 - 5000-3-240  Surprise Printed Circuit Board, w/ LM555CN, LMC60

Contains two 555 Timers ICs, One LMC60 and more.

New Old Stock PWB

Learn More