Hand Tools

PC Board Carbide Drill Bit #59.

Carbide micro drill bits provide excellent hardness, wear resistance, and heat resistance. They create precise holes with a smooth finish and often eliminate the need for reaming the hole after drilling.

Premium Grade Carbide #59 Decimal Size 0.041" (1.05mm).

Shank Diameter is 0.125", with an overall 1.48" long.

130° Drill Point, Fast Spiral Circuit Board Drill.

1/8" Round Shank fits CNC's and most Rotary Equipment.

Used for drilling PC boards or other abrasive materials when drilling accuracy must be maintained. 

For wide range of materials including non-ferrous alloys. 

Excellent for drilling Fiberglass, Plastics, Wood, Carbon Fiber, Phenolic, etc..

Alternate: 414D96 

New - Made in USA 

Learn More

Parker - 887-200-1 - O-Ring Extracting 2 Part Brass Double Ended Tool Kit, New Parker 887-200-1 tool Now Made China is copy of the former CBB Seal Co. Tool CBB2163913300 Made in USA which is our "New Old Stock" Tool Kit. CBB Seal was aquired by Zatkoff Seal and Packing in 1994. The Brass O-Ring Installation and Extraction Tool Kit contains two unique double-ended brass tools that make it quick and easy to remove or install O-rings. The finesse pick on one end is great for getting small O-rings out of grooves, while the heavy duty hook on the other end is better for digging out larger and thicker O-rings even in hard to reach places. The brass material helps to prevent damage to precision sealing surfaces. Improper installation or removal of O-rings can cause leakage or hydraulic failures in your equipment. This kit also includes a vinyl case so you don't lose your tools. Material: Bronze. Each 0.188" Diameter x about 6" Long. One has a sharp hook and a sharp flat point and the other tool has a fork and a rounded end. Quite unique this kit consists of 2 double ended brass tools in a vinyl case. These simple tools will help ensure you never have to worry about a bad O-ring seal. Made from high quality brass, work very well for removing O-rings and such without marring surrounding surfaces. Color: Gold Material: 100% Brass Alternate: Formerly CBB2163913300, Allegheny York 887-200-1, WWG-DISP-ORTOOLB, Zoro G0688843, 4F418 UPC codes: 791715984401, 791715983107 Applications: For ignition systems, intake valves, rifle bolt faces, and electronics. It is Precisely probe, pierce, pry, and position small parts. Perform well in removing gaskets, springs, oil seals, O-rings, and other small gadgets From motorcycle or automobile Made in USA New Old Stock Learn More

Non-Segmented Roll Wheel Dresser - Reverse Olated Rotary Diamond Dresser - 25 mesh - Precision Full-bullnose Diamond Grinding Wheel - 4" OD 2" ID 1.7"wide - In a nice tongue&groove Treasure Chest made & shipped from West Germany - Uses Flood Coolant

Learn More

Micrometer Head, 0-25mm metric. Graduations 0.01mm, with locknut. Approximately 4" long. Spherical tip. Maybe Mitoyo 148 Series. Learn More

T8 Torx Bits Stamped T8, 1/4" Bit

Torx is a brand name trademark for fastener heads and keys that have a six-point, star-like pattern. One of the beauties of Torx sizes is that they are universal, meaning there is not an SAE vs Metric version. They are all the same.

High resistant to wear and tear for a long tool life

Impact resistant modified chrome-vanadium-molybdenum

Tool Steel, Hardened

Imperial Point to Point: 0.90" (2.31mm)

Suitable for all applications Hardness HRC 59-61

Suitable for both manual & machine applications

Made in USA

Learn More

Nutrunner cable. Connector assembly. 18/5C-slhd + 22/4C-SHLD + 22/11C O/A Shield, 300V 90 Deg C. With attached heavy duty M-F 20 position connector. Length 5 Meter. Note: Fits - Atlas Copca. Alt P/N: TPC74705 or 23923-09. More info: http://www.tpcwire.com/images/TPC_Catalog/23_Nut_Runner_Assemblies.pdf Learn More

Diamond dressing disc's. Pair. Diameter: 8-5/8". Thickness 0.362 overall, 0.180 cutting surface. Beveled. 20 degree - R0.3 - 12/472 Numbers on disc#2: RIX 11590 009ZF17 TN 102295 525045. 8 Mounting holes, 1.56" ID. Two in a padded wooden case, drawing clear taped on top. Weight 19 lbs. Note: Used. DR Kaiser/Munson.

Learn More

Hardware, abrasive disc. High strength Disc TSM, A-Medium Grade, Max RPM: 12,000. Has a metal washer for "Roloc" fitting. Learn More

Hand Tool. TORX screwdriver 4-1/2"/(105mm)E. XTD27V. N/S No 48812. Learn More

Contact Box with Magnetic Base - AnschluBdose mit Magnathalter - Rubber coated Strong magnet 2.6" / 3mm diameter x 1.8" tall. original part number obscured, 2'd charater "W" may be wrong - with four screws. Sealed package before picture was taken. Learn More

Power Components Inc - Power Lift 5B Actuator - Rack & Pinion Double Lifter - Metric.

Power Lift Actuators convert Linear to Rotary ~~~ or Rotary to Linear motion when connected with a power source such as a motor or air cylinder.

Load applications: General Lifting and Long Runs

Maximum load capacity: 400 pounds (180 kg)

Maximum shear load: 700 pounds (317 kg)

Single and double units

1:1 Gear Ratio

Round rack units - 35 mm

Lube-free Premium Unit

Load applications: high-volume, long runs; heavy power drive units

Maximum load capacity: 600 pounds (272 kg) 

Maximum shear load: 1050 pounds (475 kg)

Note: Work Order Number Stamped W05-3319750001.

Made in USA - New

Learn More

Nutrunner head, 17mm. New. Learn More

Doriot Two pulley custom straight handpiece dental equip 20,000RPMJapan Learn More

TE Connectivity AMP INC - 69710E - Premium Crimp Tool.

Anyone can make a tool to crimp terminals onto a wire. But not everyone can manufacture a tool to
crimp the terminals properly. Crimp termination of wires isn’t easy. At least, doing it right isn’t easy. We
know. We started it. TE Connectivity developed the technology of hand crimping over 70 years ago.

The 69710-1 is a C-Head Straight Action Hand Tool. The tool consists of a head with a stationary die holder and moving die holder and handles with a ratchet. This tool is a member of the CERTI--CRIMP* hand crimping tool family. The ratchet on this tool ensures full crimping of the product. Once engaged, the ratchet will not release until the handles have been fully closed. The interchangeable die sets close in a straight line to minimize contact or terminal rotation during crimping. When applicable, user-assist features such as a contact or terminal locator and a wire stops are built into the die set.

Straight Action "C" Head.

Ratcheting. Mod D for Termashield Ferrules.

Learn More

Hardware, abrasive disc. Trizact - Hook-it. Dimensions: 127mm x NH (5 in x NH). A300 Grit. Learn More

Hardware, sanding disc. 8" Speed-grip (R) 100 Deg F, grit paper. Size: 8" x 1-1/4" 208 x 31.8mm. Premium seeded gel abrasive grain - F-Wt heavy paper backing. Long life, cool cutting. High & consistent cut rate. Tear resistance and ability to withstand high pressure. Normally used on rotary right angle & random orbital (dual-action ) sanders with velcro back up pads. Primarily automotive; blending & intermediate cutting; cleaning and surface prep; dry grinding or sanding; metalworking; portable grinder or handheld; woodworking; vertical shaft grinder. Learn More

NIKKEN CAT50-ZL12-115U TAP HOLDER,ADAPTER,CNC,VMC,MILLUSED, QUANTITY 1, CAT 50 SHANK 0-9/16" CAPACITY, EXENSION/COMPRESSION TYPE 10-1/4" OVERALL LENGTH Learn More

Extraction tool. M10-12/99C. For AN/MS Series connectors. No. 12 and 16. Military NSN 5120-01-349-0750. Learn More

Tools. Ratchet crimp tool. Interchangeable die frame. For use with 75 Ohm BNC connectors. Used, excellent condition. Complete in manufactures protective case. Rohs compliant. Learn More

Rapid mounting tool RK254. Material: plastic, black. Learn More

Wire Wrap tool/insert - just over 3" long. Learn More

Cooper Tools - 508824 - Tools, Cam. Wire-Wrap.

UPC 037103956699

Learn More

Tools. Pliers, for inserting/extracting, straightening and cutting of ICs and SMDs. Size: 32mm x 120mm. Spring loaded foam-padded handle. Material: high grade steel, anti glare finish, ESD safe. Manufactured by Erem for Cooper. More info: http://www.cooperhandtools.com/europe/sales_literature/documents/EremCat_2004_GB_000.pdf Learn More

APEX - UG-MB-13MM25 - 13MM25 13mm Apex 6-Point u-Guard Magnetic Bolt Clearance Metric Impact Socket, 1/2” Square Drive Apex U-Guard (UG) impact sockets are manufactured in the USA. These, produced by Apex Tool Group (headquartered in Sparks, Maryland), are designed for heavy-duty industrial and automotive applications, featuring a protective polyurethane cover over the socket. 1/2 in Drive Socket with U-Guard Standard Socket, The UG-MB-13MM25 13mm Apex 6-Point u-Guard Magnetic Bolt Clearance Metric Impact Socket, 1/2” Square Drive is a high-quality metric impact socket designed for professionals who require durability and precision. Ideal for use in demanding industrial, automotive, and aerospace applications, this socket features Apex’s u-Guard technology, providing a protective layer that prevents damage to surfaces and fasteners during use. The UG-MB-13MM25 13mm Apex 6-Point u-Guard Magnetic Bolt Clearance Metric Impact Socket, 1/2” Square Drive ensures secure power transmission and exceptional torque handling. The 6-point design enhances grip, minimizing rounding on fasteners while offering superior durability under impact. Constructed from premium materials, this socket is built to withstand high-torque applications, providing reliable performance and resistance to wear and corrosion. Choose the UG-MB-13MM25 13mm Apex 6-Point u-Guard Magnetic Bolt Clearance Metric Impact Socket, 1/2” Square Drive for optimal efficiency and surface protection, ensuring precision and long-lasting durability in every task. Key Features: Durable, impact-rated, and, in the case of UG sockets, equipped with a protective urethane cover to prevent damage to sensitive surfaces. Metric, Standard, 13mm Made in USA New Old Stock Learn More