Soldering Equipment

Stainless steel blunt dispensing tips, 30AWG x 1/2". Color: light purple. Package of 50. Learn More

Techon Systems - SE18-1-50 - SE418100PK - Stainless Steel Blunt Dispensing Tips / Needle.

Providing high quality fluid dispensing solutions globally, Techcon Systems is an innovative manufacturer that has been serving the general industrial markets since 1961.  

The E-Series and SE needle series consist of a stainless-steel shaft with a luer lock polypropylene hub. This line of dispensing needles are burr-free, and electro-polished shaft for unobstructed and consistent material flow. In addition they are silicone and chloride free. Designed to dispense most viscosity fluids and adhesives. These tips are epoxy bonded from the metal shaft to the plastic hub and are supplied at an economical price .

All needle tips are safe to use up to 100 psi air pressure. They are supplied in standard packs of 50 or in bulk packs. Suitable for use with all syringe barrels and dispense bottles including luer lock (twist on) and luer slip (push on) types for both pneumatic and manual dispensing.

SE Series

18AWG x 1".

Color: Light Green.

Material: Luer Lock Polypropylene Hub and Stainless Steel Cannula

Dimensions: 0.84mm-ID (0.033"), 25mm-Long.

Outer Diameter: 0.050" (1.27mm) 3/64"

Applications: Applying most adhesives, solvents, gels, pastes and glues.

Package of 50.

Alternate: SE418100PK

Learn More

OK Industries - S9-305S Soldering Iron Tip.

Soldering Iron Tip 0.047".

Double Flat 1.9mm.

For use with K455, K337 Macro Iron Solder Stations.

Learn More

Stainless steel blunt dispensing tips, 26AWG x 1/2". Color: light beige. Package of 50. Learn More

Litton KESTER - 7-220 Solder. Acid Core.

Acid core solders are manufactured with the solder wire as a tube and the center of the tube contains the flux which  must be removed after soldering to avoid potential part corrosion. Heat sources for cored solders can be air/fuel torches or soldering irons and guns.

Metal Mender Solder. 40% Tin / 60% Lead.

Acid Core is classified as INH1 per J-STD-004.

0.080" Diameter.

1 Ounce.

New Old Stock

Made in USA

UPC 0 27041 83310 7

Learn More

Iron Man Overvoltage Soldering Iron Workstation Monitor. Whenever a soldering iron, tweezers or other type tool touches the grounded pad of a board, the 3M Iron Man Monitor will alarm if overvoltage on the board is detected. High or Low selectable alarms: High sensitivity 0V to +/-5V. Low sensitivity 0V to +/-50V. Complete with universal 120/240Vwall adapter power supply and instructions. P/N 80-0009-1885-6. Learn More

HVL Bag Filter. Metal frame, cloth interior. Dimensions: Just under 20" long x just under 10" high x 1" deep. NIB. Learn More

Stainless steel blunt dispensing tips, 22AWG x 1/2". Color: clear. Package of 50. Learn More

OK Industries Techon Systems - SE20-1/2-50 - SE420050PK - Stainless Steel Blunt Dispensing Tips Needles, 20AWG

Providing high quality fluid dispensing solutions globally, Techcon Systems is an innovative manufacturer that has been serving the general industrial markets since 1961.  

The E-Series and SE needle series consist of a stainless-steel shaft with a luer lock polypropylene hub. This line of dispensing needles are burr-free, and electro-polished shaft for unobstructed and consistent material flow. In addition they are silicone and chloride free. Designed to dispense most viscosity fluids and adhesives. These tips are epoxy bonded from the metal shaft to the plastic hub and are supplied at an economical price .

All needle tips are safe to use up to 100 psi air pressure. They are supplied in standard packs of 50 or in bulk packs. Suitable for use with all syringe barrels and dispense bottles including luer lock (twist on) and luer slip (push on) types for both pneumatic and manual dispensing.

SE Series

20AWG x 1/2".

Color: Pink.

Material: Luer Lock Polypropylene Hub and Stainless Steel Cannula

Dimensions: 0.610mm-ID (0.024"), 12.69mm Long.

Outer Diameter: 0.036" (0.91mm) 5/128"

Applications: Applying most adhesives, solvents, gels, pastes and glues.

Package of 50.

Alternate: SE420050PK

Learn More

CANFIELD - SIL-CAN 15 Silver Brazing Alloy.

Most widely used and easiest to use silver brazing alloy for copper and copper alloys, combining the highest ductility with the lowest brazing temperatures. It is used when close fit-ups cannot be maintained and is self-fluxing on copper to copper joints. Ideal on air conditioners, radiators, electrical connections, etc. Contains 15% silver. Brazing temperature is 1300 F.

Melting Temperature: 1195 F - 1470 F

• Contains 15% silver, 5% phosphorus, remainder
• Best alloy for filling gaps when close fit-ups cannot be made
• Highest joint ductility and strength in HVAC-R applications
• Meets AWS BCuP-5

Weight 0.6 oz each. 

Note: All purchasing parties must read and be aware of: http://hazard.com/msds/f2/bsh/bshgk.html 

Learn More

Wire Wrap tool/insert - just over 3" long. Learn More

Tools, Cam. Wire-wrap. Learn More

30 AGW, MOD, 25 MIN, Wire Wrap Bit Learn More

Soldering tools. Single flat tip 1/16" x 1.6mm. Learn More

Tools, solder tips. 1.5mm D. Overall 28.6mm with mount 4mmOD/2.7mm ID.Alternate: Weller PTDD9 0.18", 900 DegF. Learn More

Weller Ungar - PL833 Soldering tools.

Imperial Soldering tip, 3/16" thread in.

Material: Iron-Clad, pre-tinned 

Chisel Tip

Dimensions: 5.08 x 0.51 x 0.51 cm; 9.07 Grams

New.

Applications: Fits 4045S, With Ungar 101 Adapter, fits models 537, 537S, 1237S, 4037S, 37 H.P., DI Line 360, 361, 362, 3-Wire Line 1270, 1350, 1450, Iron-clad, Pre-tinned tip

Learn More

Ungar - PL824 - Soldering tools. Soldering Tip.

Soldering tools. Soldering tip.

Iron clad 3/16" thread in. New.

UNGAR - PL824 - Soldering Tools.

For general - purpose work.

Use with 4045 element thread into end.

Silver -plated ironclad copper.

3/16" O.D. for High Heat Transfer.

1" Unthreaded length

 

 

Learn More

UNGAR - PL333 - Soldering Tools. Chisel Tip, 1/8" Thread.

Soldering tips for thread in heaters. 

Iron/Silver plated chisel, 1/8" thread. 

Fits Tool(s): 1/8 in. Thread­ In SL Heaters

Tip Style Chisel:Tip Width O/D .13 in./3.3 mm

Tip:Thickness/Height: I/D:.13 in./3.3 mm

Reach/Length: 0.85 in./21.59 mm

For use with heaters #535S, # 1235S,#4035S

With # 100 Adapter may be used with #537S, # 1237S, #4037S and # 37.

With #9054 Adapter may be used with 9300 iron, 9911, 9000 and 9100

 

Learn More

Soldering tools. No 100 threaded adapter. Learn More

Stainless steel blunt dispensing tips, 25AWG x 1/2". Color: pink. Package of 50. Learn More

Stainless steel blunt dispensing tips, 21AWG x 1/2". Color: lavender. Package of 50. Learn More

Plato Products - PS-411-W/S-119 - Soldering Equipment. Tip, 0.4mm.

PS Series

Tip Size: 0.4mm

Overall Dnsions: 0.225" (5.7mm) D x 2.006 (50.9 mm) long. 1.351" (34.3mm) above seat.

Solder Tip for Hakko Stations

Alternates: 577-PS-411, W27338, Allied 70627032

New - Rare

Learn More

Plato Products - 2C-5152 - Soldering equipment.

Tip. Dimensions: 3.1mm D x 29.8mm long, (26.1mm above threads).

New.

Learn More

Plato Products - MS-157 - Tools, Solder Tips.

Tip: 2.3mm Diameter.

Overall 27.7mm with mount 3.9mm OD/2.8mm ID.

Alternate: Weller PTDD9 0.18", 900 DegF.

Learn More