Meters & Indicators Other

Meter, Kilowatt-Hours. 120V - Rr 27 7/9 glass cover over 5 rotary 0-9 indicators. 5 Heavy pins in back. No socket. Glass cover about 5.7"OD and 6"Deep. 5-Dial. Weighs 5.5 lbs. Sockets seem to be available at local hardware stores

Learn More

KYORITSU ELECTRICAL INSTRUMENT WORKS EW-20 - 1348-1 - Edgewise Panel Meter, 50-0-50 uADC.

Zero-center, 10 divisions, 5 each side of center.

+/- 50uADC

Material: plastic, clear.

Dimensions: 13mm high x 41.3mm wide x 56mm deep.

Galvanometer. Model EW-20.

Learn More

Meter, DC edgewise. 50uA. Type 185. Mount: panel, horizontal. No mounting bezel. Magnetically shielded, stackable. Note: 50-0-50uA DC, either side of center zero, 2% accuracy. Scale reads: 0 - 100, with a red dot and the meter arrow-indicator at the center "50" until your Microamps move it either right or left. ANSI C39.1 Dimensions: 0.92" (23mm) high x 2.258" (57.3mm) long x 3.44" (87.2mm) deep. Learn More

Meters & Gauges. 0 to 1000. Duragauge. Size 45. Dimensions: 4" D face with an overall 6" diameter, with one rear 1/2" BC connector. NIB.

Learn More

Meter. 0-20mA DC. "X-RAY Tube". Marked 0- 20, and "5, 10, 15". Mount: Panel. Requires 2.75" round hole. Dimensions: 3.5" round bakelite. New. Note: Model 582.

Learn More

Meter. 0 - 150 AC Milliamperes. Simplex logo. Black round bakelite body. Beautiful adjustable jeweled movement, requires a 2.2" hole x 2.7" across whole face. Learn More

4-1/2" Fig.24F - 15# - 1/4"NPT Back Connector beautiful, sleek FLUSH MOUNTED CASE - Black Finish - Beautiful Gage made for Bailey Meter Company few years back. 6.25" diameter, almost 3" behind control panel. Learn More

5 DIGIT ELAPSED TIME METER 400 CYCLE 110 TO 125 VOLTS AC PANEL MOUNT (APRX 2-3/4" HOLE REQUIRED) LEE CO THE J B T DIV ELECTRICAL MOVEMENT TYPE MAGNETIC MEASUREMENT UNIT HOURS MILITARY METER Learn More

Meter, edgewise panel. 200-0-200 uADC zero-center. Plus or Minus 200uA. Scale Reads: 0-100 Zero(50)Center Verticle Reading - with mounting hardware - 2.5" wide x 0.75"hi x 3.8"deep - stackable 200-0-200uAmp-DC. Learn More

Powermeter, recording. Portable case, latching transparent plastic cover. Seven [ 7 ] multi-position Connectors for: 2-AC voltage input, 2-AC current input, 1-output option(2-pins), 1-alarm contact (all 24-pins), 1-power input(6-pins), and heavy binding post for #14AWG earth ground. Weighs 22-pounds

Learn More

Meter. 0-10 Pounds per hour, with 0.2 increments. FS-200dcua. White scale with black numerals and red pointer. Dimensions: 3.35" wide x 0.67" high, mounting bracket included, original box. Learn More

Thermometer. 0-250 Degree F, -18-120 Degree C. Bi-Metal, 3" D with a 4" stem. NIB. Made in the USA. Learn More

Shunt, external. 30ADC 50mV. On 6" long x 1.25" wide plastic frame. Note: Used/Removed from equipment.

Learn More

Meters and gauges. Model 850. 0-5 AC amps, panel. Learn More

MARSHALLTOWN MANUF. - FIG 83B Pressure Gauge 0-60CM H2o CM of water pressure

2-1/2" dia. 0-0.82 PSI Manometer Gauge (Rear Hose Connection)

Quality Vintage New Old Stock. 

Made in USA

Learn More

Meter, edgewise. 0-1mA. Scale: 0-100. Housing clear, black scale, white indicator. Dimensions: 13mm high x 41.3mm wide x 56mm deep. Vertical. Model EW-20. Learn More

Meter. 0-500 Milliamps AC 2.7" shielded analog meter. Model 57MR. Mounts in 2.2 inch hole. Black lettering on white face.Marked 3000VAC on back with rubber gasket and two solder terminals. Note: Slightly corroded housing only. Military NSN 6625-668-5826. Learn More

General Electric - 50-185114CYCY1ACH Meters - 185 Edgewise Panel Meter 25-0-25 uA DC.

Edgewise 25-0-25 uA DC, 0-100 vertical.

Zero center.

Sensitive.

Special transparent plastic face plate extends 1.3" to the right of the meter.

Scale reads 0/20/40/60/80/100 from bottom to top - emergency red indicator, light green at 50 (50% safe zone), extends 3" behind panel.

Overall dimensions: 0.95" wide x 2.25" tall.

No mounting hardware.

Learn More

Ammeter, 0-100 DC AMP. Requires a 200MV Shunt (not included), 200 mV movement requires 5 mA for full-scale deflection, internal resistance is 40 ohms. Miniature scale 1-1/2". Learn More

Meter, SPDT relay. Hermetically sealed - ruggedized ''DO NOT OPEN''. Meter face: 2". High and low set points adjustable from front of meter. Appears to be very sensitive but we don't know the actual rating. Scale reads -25 - 0 - +25 Percent of +18V. Single hole mount, for 2.211" D hole. Three holes for mounting all with 2.083" centers. Contacts: 5 solder hooks. Note: Marked: ITTFL-4566028-04. Learn More

0-200psi INDUSTRIAL DURALIFE GAUGE0-200psi RANGE, 2 1/2" FACE, STAINLESS STEEL CASE, 316 TUBE/SOCKET, 1/4" NPT CONNECTION. NEW IN MANUFACTURER'S BOX. Learn More

Meters & Gauges. Receiver gauge 330 Deg 10" dial. Size 12. Blank face. Large Black Dial - Only be used to indicate pneumatic instrument air pressure - 1/4BC Connector. Dimensions: overall 13.5" D. Learn More

2 INCH. 0-100 PSI GAUGE 1/4 'NPT BRASS BACK PORT

Learn More

Analog meter movement to be series connected into hard-wired perimeter security systems. Mounts in a 2" dia. hole. Internal resistance 182 ohms. Full-scale deflection 10 milliamps. (No mounting hardware furnished) Learn More