Other Process Control
-
CUTLER-HAMMER - E65-SMPR3-HL - Sensor, photoelectric. 3M polarized reflex / LT.$87.99Sensor, photoelectric. 3M polarized reflex / LT. 10-30VDC, 2 meter cable. Learn More -
CUTLER-HAMMER - E65-SMPP50-HL - Sensor, photoelectric. 50mm Perfect Prox / LT.$87.99Sensor, photoelectric. 50mm Perfect Prox / LT. 10-30VDC, 2 meter cable. Learn More
-
CUTLER-HAMMER - E65-SMPP100-HL - Sensor, photoelectric. 100mm Perfect Prox / LT.$87.99Sensor, photoelectric. 100mm Perfect Prox / LT. 10-30VDC, 2 meter cable. Output current: 100mA. Sensor output: NPN/PNP. Sensor housing: square. Sensing range min: 100mm. Sensor input: optical. Supply voltage max: 30VDC. Series: SM. Sensing range max: 4". Learn More
-
CRYDOM - PR-4R - I/O Mounting board.Special Price $84.98 Regular Price $124.95CRYDOM - PB-4 - I/O Module for Standard I/O Modules, 4 Channel Screw Terminals. • Screw terminal barrier block for logic connections • Screw terminal barrier block for load connections • Resident pull-up resistors • 5 amp field-replaceable fuses (LITTELFUSE #251005 or equivalent) • LEDs indicate logic status • All even-numbered logic connections are logic ground • Input and output modules accepted interchangeably • Operate with 5, 15 or 24 volt logic supplies • Captive-screw retaining system for standard-size modulesI/O Mounting board. For standard I/O module relays. Dimensions: 4.5” X 3.5” X 2.2” High (wiith Modules Mounted) More info: http://www.crydom.com/en/products/catalog/p_b4.pdf Learn More
-
CRYDOM - PB-4 - I/O Mounting board.Special Price $68.98 Regular Price $84.95I/O Mounting board. For standard I/O module relays. More info: http://www.crydom.com/en/products/catalog/p_b4.pdf Learn More
-
CRYDOM - RSF14Y100RF - Float Actuated Switch.$16.99READY TO SHIP - ONLY 1 LEFT IN STOCK!
Sensor, level. Voltage: 120VDC, 240VAC. Output: SPST-NC/NO, 600mA. Minimum liquid specific gravity: -0.70 Switch actuation level: 0.945" (24mm). Mount: Panel. Material: housing - propylene (PP). Two wire. Operating temperature: -20 to 100 Deg C. Rohs compliant. Note: High level switch for boiling water.
Learn More -
Comptrol - ProLog WorkStation - ProLog Work Station.Special Price $1,298.00 Regular Price $2,500.00 -
CERBERUS - GM31 - Seismic sensor alarm 10-15V.$100.00Seismic sensor alarm 10-15V, adjustable sensitivity. Package: enclosed 3.524" (89.5mm) square x 1.471" (37.3mm) high. NIB. Learn More
-
BUDZAR - 610-030-0120 - Industrial Thermocouple SS housingSpecial Price $95.99 Regular Price $129.00Beautiful T/C with Red, Grn, Wht, Blk wires inside a SS / cast metal Pyromation housing almost 11" long - R1T285H3-SL4D0609-801-71-R Learn More
-
BRAD HARRISON - 45830-008 - Connector, nano change cord.$20.00Connector, nano change cord. 36" 3 conductor 24AWG, 10-30V 3A yellow cable with black plastic male and metal female 3-pin micro connectors. Learn More
-
CALEX - 555 - MODULE DUAL SET POINT SINGLE OUT VOLTSENSORSpecial Price $87.99 Regular Price $121.11VOLTSENSOR - DUAL SET POINT - SINGLE OUTPUT to 80% of Supply Voltage to 50mA - Trip Point Range to 95% of Supply Voltage, stability <1mV/degC - Input Impedance >50Kohms - Hysteresis <4mV - Infiniste Resolution depending on potentiometer - Power Required +/-12 to +/-18VDC Learn More
-
CALEX - 551-5 - Voltsensor Controller.Special Price $59.30 Regular Price $95.00Voltsensor Controller. When Input goes above HIGH setpoint there is No Output. Output will remain OFF until voltage goes below LOW set point. Since either setpoint can be anywhere between the plus & minus power supply this adjustable hysteresis or deadband can be adjusted over this entire range. Pin-compatible with 555 but Reverse Polarity on Outputs. Mount: PCB, 9 pin, gold. Dimensions: 1.5" square x 0.70" high. Learn More
-
CALEX - 551 - Voltsensor Controller.Special Price $59.50 Regular Price $95.00Voltsensor Controller. When Input goes above HIGH setpoint there is No Output. Output will remain OFF until voltage goes below LOW set point. Since either setpoint can be anywhere between the plus & minus power supply this adjustable hysteresis or deadband can be adjusted over this entire range. Pin-compatible with 555. Mount: PCB, 9 pin, gold. Dimensions: 1.5" square x 0.70" high. Learn More
-
Barber Coleman - 10QR-0JF00-000-0-00 - type J temp Indicator w/ relay output Quarter-DINSpecial Price $87.99 Regular Price $123.45Quarter DIN SPST-NO Relay Output -100 to +1600F Controller (relay) and Indicator - New in box with instructions. May also be used with RTDs - May also be used with RTDs - Large 15mm 7-segment LED displays, All front panel push button controls. Learn More
-
BARBER COLEMAN - 10Q80JF00000000 - TEMP INDICATOR/CONTROLLERSpecial Price $95.99 Regular Price $125.00TEMPERATURE CONTROLLER & INDICATOR - PANEL MOUNTING USE W/ SERIES 10Q CHASSIS - 85/250VAC INPUT RATING. Learn More
-
Barber Coleman - 10ER-JF00 - Type J T/C -100 to +1600F Temperature Controller, NewSpecial Price $189.98 Regular Price $250.00
Barber Coleman - 10ER-JF00 - SERIES 10E Eighth DIN
Front Panel Pushbutton Controls
Two 4-Digit 7-Segment LED Displays
Relay Output 1 Form A (SPST-N.O.) Temperature Controller, with 1/8-DIN housing w/ mounting hardware
85-250V 50/60Hz
Instructions included.
Appears capable of using RTDs.
New Old Stock
Learn More -
Banner Engineering Corp - SBLV-PBA-LM3 - MULTI-BEAM: 3/4 Wire Scanner BlockSpecial Price $79.95 Regular Price $90.00MULTI-BEAM: 3/4 Wire Scanner Block - Retroreflective Range: 0.15-9 m; Input: 120vac 50/60Hz Output: 120VAC 100VA -- Logic Module : Input: on power blockFunction: ON-OFF Light or Dark w/ SMB30MM Bracket: 30mm Learn More
-
Banner Engineering Corp - SMB18S - Hardware, sensors. Mounting bracket.Special Price $8.98 Regular Price $14.50Banner Engineering Corp - SMB18S - Swivel Mount, mounting bracket.
18 mm Swivel
Material: Black VALOX
Hardware included
For use with 18mm Threaded-Barrel Sensors.
Ball and Socket Joint.
Learn More -
Banner Engineering Corp - OC-120 - AC INPUT MODULESpecial Price $68.98 Regular Price $84.50READY TO SHIP - ONLY 1 LEFT IN STOCK!Banner Engineering Corp - c- AC INPUT MODULE
CONVERTS A 120VAC SIGNAL TO AN ISOLATED DC SOLID-STATE SWITCHING TRANSISTOR.
Status: Discontinued
Input: 120 VAC
Output: Normally open - Open NPN
8-PIN Octal Base
Part Number: 18822
Learn More -
Barber Coleman - 80CA-30001-001-0-00 - Maco Pac Sequence Module.Special Price $298.98 Regular Price $350.00
Barber Coleman - 80CA-30001-001-0-00 - Maco Pac Sequence Module.
Status: Discontinued
Control Software P/N: 81CA-00102-ED1-0-00.
Maco-Net LNI P/N: 8122-01200-001-0-00.
120VAC 50/60Hz 100VA max.
Note: Alt P/N: Maco 8000.
Learn More -
Banner Engineering Corp - RWB4 - Terminal Block/Wiring Block BASE$9.00Terminal Block/Wiring Block BASE for Maxi-beam photoelectric Learn More -
Banner Engineering Corp - PBAQ - Power Block for Multi-Beam 3 and 4 wireSpecial Price $68.98 Regular Price $92.50Banner Engineering Corp - PBAQ - Power Block for Multi-Beam 3 and 4 Wire
Alternate Mfr Part Number: 16603For Use With: Photoelectric SensorInput Voltage: 105-130 VACLearn MoreOutput: SPST-NC Normally Closed, 3/4 amp max.UL & CSANew Old Stock -
Banner Engineering Corp - LM5R - Logic Module for Multi-Beam$49.00Logic Module for Multi-Beam Learn More -
Banner Engineering Corp - LM3 - Sensor, light. Multi-beam. New.Special Price $36.98 Regular Price $48.50READY TO SHIP - ONLY 4 LEFT IN STOCK!Banner Engineering Corp - LM3 Sensor, light.
Multi-beam: Logic module.
Range: Depends on sensor.
Application; Interconnecting the power block and scanner block
Function; Module, Logic
Includes; Blade & socket connector
Logic Type; ON/OFF, Light or Dark Operate
Sensing Mode; Adjustable Field
Series; MULTI-BEAM Series
Technology; Photoelectric
Input: On power block.
Function: ON-OFF Light or Dark Operate.
Interconnecting Pins. New.
Alternate Mfr Part Number: 26665
Learn More
