Solenoid

411823-1 T-Shaped Solenoid, 26 VAC Coil.

This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most AC solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.

Solenoid consists of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil.

Operation: Pull.

Load Force: >48 oz.

Stroke Length: 0.6".

Duty Cycle: Continuous.

Coil: 26VAC 0.75A 5.5 Ohms.

Plunger Configuration: Rectangular w/pin-in-U.

Mechanical: 8 holes on Base.

Body Dimensions: 1.2"x1.5"x2.5" .

Weight: 0.42 lbs.

Connection: 3/16" Male Solder Spades.

Applications: Wurlitzer Solenoid 411823-1 Turntable Speed Shift Coil.

         Seeburg M100C Phonograph Latch Bar Solenoid

         Seeburg SS-160 Showcase Jukebox 

         Science Projects 

Similar to Dormeyer or Guardian Electric Industrial/Commercial Solenoids tailored
for high force, short stroke solutions. Continuous or intermittent duty; on/off operation; standard and laminates with life from 50,000 to 100,000 cycles, offering pull-in engagement which is well-suited to lock/latch operations.

Alternates: SOL-20.

Note: We have Solenoids with the power connections on either the left or right side. See last two pictures to identify options and advise if you need specific right or left connections. 

USED May have some rust on the frame.

Learn More

PSP MFG - 5945-502-4495 SD-845 Solenoid, DC.

Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75.

Duty cycle: Continuous.

Coil: 24VDC 0.58A 41 Ohms.

Plunger config: Round with 3/8" loop.

Mech: Rectangular flange.

Body dim: 1.5"D x 4". Weight: 1.1 lbs.

Connection: MS3102A-125-3P Conn. Formerly:3380-708550-9985.

Learn More

GUARDIAN ELECTRIC - A420-064181-00 - Solenoid, DC.

Operation: Pull.

Load Force: >16 oz.

Stroke Length: 0.5.

Duty Cycle: Continuous.

Coil: 24VDC 0.3A

Coil Resistance: 77 Ohms.

Plunger Config: Round w/ Slot & Hole.

Mech: Two 6-32 holes in base.

Body Dimensions: 1.4 "x 0.85" x 2.75".

Double Marked: 11-7-156034

Weight: 0.2 lbs.

Connection: Polarized coil w/int.diode, narrow pin (+).

Note: Large Discount for Manufacturer's Vacuum Package of 20 Pieces

Made in USA

Learn More

Solenoid, DC. Operation: pull. Load force: >48 oz. Stroke length: 0.75. Duty cycle: intermittent. Coil: 26VDC 12A 2.7 Ohms. Plunger config: round w/ 1/4-32 hole. (Will extend approximately 3/4" away form unit). Mech: square flange/4 holes. Dimensions: overall 3" x 2-1/2" x 2-1/4" high. Weight: 2.2 lbs. Connection: 8-32 studs for coil connections. Learn More

MAGNET SCHULTZ OF AMERICA MSA - 6635/0020 - S-06635 Solenoid, DC.

Magnet-Schultz of America (MSA) is a leading innovator and manufacturer of electromagnetic devices including standard, specialty and totally custom—solenoids, actuators, voice coils and value-added assemblies.

Operation: Pull.

Load force: >48 oz.

Stroke Length: 1" .

Duty Cycle: Continuous.

Coil: 24VDC 0.33A 72 Ohms.

Plunger Config: Round w/Slot & Hole.

Mech: 2 pairs of side holes.

Body dim: 0.95"x1.2"x1.95".

Weight: 0.28 lbs.

Connection: 3/16" Male Quick connect Spades.

Additional Information: https://www.magnet-schultz.com/en/solenoids

Learn More

GUARDIAN - A420-065891-00 Solenoid.

Mechanical solenoids are used to stop, clamp, position, switch, latch, lock, release, hold, and divert motor motion. 

230 VAC

Operation: Pull.

Load force: >32 oz.

Stroke length: 0.5 Inch

Duty cycle: Continuous.

Coil: 230VAC 0.09A 340 Ohms.

Plunger config:Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 2.3"x1.2"x1.5".

Weight: 0.41 lbs.

Connection: 1/4" spades on coil.

Life Expectancy >500,000 Cycles

230V 50HZ SOLENOID NEW DBL MARKED 13-7-160883

Learn More

GUARDIAN - A420-060997-00 Solenoid

24 VDC Tiny SOLENOID

0.5" DIA x 1" Long - ROUND W/ BASE MT

0.195" plunger with locking device at tip

E120-59

Addressograph Multigraph P/N E120-59 - Rare - an't find these anymore

Vinatge New Old Stock

Learn More

This solenoid has a T-shaped laminated design plunger and laminated steel frame. It has the unique ability to hold an exceptionally heavy load with a minium of humming or vibration. To minimize the humming or chattering of most solenoids, the contact surfaces of the laminated frame and plunger are machined to provide a smooth and flush contact surface.

Laminate solenoids consist of a laminated steel frame, a coil, and a movable plunger in the center of the coil. When the coil is energized the plunger is pulled into the coil

E120-87 - Linear Solenoid,

AC. Operation: Pull.

Load force: >48 oz.

Stroke length: 0.75"

Duty cycle: Continuous.

Coil: 115VAC 0.24A 475 Ohms.

Plunger Config: Rectangular w/u-brkt.

Mech: 8 holes on base.

Body dim: 1.2"x1.5"x2.5".

Connection: solder lugs on coil.

Weight: 0.4 lbs.

New Old Stock

 

Learn More

RBM CONTROLS/ESSEX - 70-120226-5,  PS50053-5-2 High Current Starter Solenoid Relay

36VDC METAL HI CURRECT SOLENOID RELAY (SPST N.O.)

Estimating 200Amps Solenoid 

Two Large Copper Contactor Terminals: 5/16-24,

Single Coil Terminal: 10/32, Case Ground.

Flat Flange mounting with two large slots 2.1" apart.

Extra heavy duty corrosion resistant steel body.

Marked 70-120226-5 RFE looks in good condition

As Removed - Used

 

Learn More

30VDC SOLENOID Heavy - 1.5"OD cylindrical - threaded plunger 0.61"OD - two "wings" for mounting (undrilled) 2-pin MS connector - Aircraft surplus - NEW Old Stock Learn More

MAGNET SCHULTZ OF AMERICA - S-07535 Solenoid,

AC. Operation: Push.

Load force: 9.6 oz at 0.2" Stroke.

Stroke Length: 0.2. Duty cycle: continuous.

Coil: 120VAC 225 Ohms.

Holding Force: 51 Oz

Plunger config: round 0.31"D plunger w/ 0.094"D 1.6"L rod.

Mech: 2 0.11" holes 1" apart.

Body dim: 1.86" x 0.94"W x 1.87"L plus 3" plunger.

Weight: 5 oz.

Connection: 2 x 0.187" terminals.

Genuine Magnet Schultz - New Old Stock

Additional Information: https://magnet-schultzamerica.com/

Learn More

MAGNET SCHULTZ OF AMERICA - S-06675 - NEW

24VDC, 11.0 Watt, Pull Solenoid Box Frame Solenoid

holding Force: 198 Oz

Maximum 5 oz at 0.5 inches stroke, Minimum 48 oz at 0.12 inch

52-0hm Coil - Continuous Duty

Box Frame Body: 1.622" x 1.441" x 1.752".

Additional Information: https://magnet-schultzamerica.com

Learn More

GUARDIAN - A420-062396-00 Solenoid, AC.

Operation: Push.

Load force: >16 oz.

Stroke Length: 0.3.

Duty cycle: Intermittant.

Coil: 115VAC 0.3A 63 Ohms.

Plunger Config: Round w/.75" knob.

Mech: 4 8-32 holes.

Body Dimensions: 1.65"x1.45"x2.3".

Weight: 0.55 lbs.

Connection: 5" 18 ga. leads.

Learn More

GUARDIAN - A420-060761-00 Solenoid, DC.

Operation: open/close.

Load force: >48 oz.

Stroke length: 1.

Duty cycle: continuous.

Coil: 170VDC 0.109A 1560 Ohms.

Plunger config: round w/slot & hole.

Mech: 2 pairs of side holes.

Body dim: 0.95"x1.2"x1.95".

Weight: 0.27 lbs.

Connection: 6" 22 ga leads.

Note: Alt P/N: E120-54.

Learn More

GUARDIAN - A420-059001-00 Solenoid 

24VDC @ 250ma

Dimensions: 1-3/4" long x 1/2" x 1/4 plungerwith 1" pull @ 24VDC .

Unit measures 1-1/2" high x 1-3/4" deep x 1-1/8" wide.

Unit can be flush mounted by any of eight 3/16" holes.

New Old Stock

Learn More

MAGNET SCHULTZ OF AMERICA - MSA- 06244 - S-0-6244 - R24X13 - Solenoid, DC.

Intermittent Duty Cycle

24 VDC Pull

14 Ohm Coil, 100 ounce.

Maximum 118.7 oz at .025 in., Minimum 92.5 oz at .025 in.

Primary Function Pull, Intermittent Duty Cycle.

Package: Cylindrical 1.5" OD x 2" Long.

Threaded Bushing Panel Mount.

Note: REGDON 24VDC-ID.

Proudly Made in USA

Learn More

GUARDIAN - A420-064182-00 Solenoid, DC.

Operation: Pull in Against Spring Load Force: >16 oz.

Stroke Length: 0.5 Inch.

Duty cycle: Continuous.

Configuration: D-Frame

Coil: 24VDC, 0.3 Amp, 77 Ohms.

Plunger Configuration: round w/ slot & hole.

Connection: Polarized Coil w/internal diode, narrow pin (+).

Special Features: Heavy duty

Mounting Mechanical: 2 6-32 holes in base.

Overall Body Dimensions: 1.4"x0.85"x2.75".

Weight: 0.2 lbs.

Learn More

MAGNET SCHULTZ OF AMERICA - S-09562 - Tubular Solenoid, DC. Push,

24VDC

Continuous Duty Cycle

Coil Resistance:105 ohm

Force: 35 ounce at 0.03 inches.

Dimensions: 1.0" OD x 2.4" long excluding 3.95" long rod.

Learn More

MAGNET SCHULTZ OF AMERICA MSA - S-06697 Solenoid, DC.

Operation: Pull.

Load force: >48 oz. 

Stroke length: 1.

Duty Cycle: Continuous.

Coil: 110VDC 0.114A 1060 Ohms.

Plunger config: Round w/slot & hole.

Mech: 4 8-32 holes on 2 sides.

Body Diameter: 1.4"x1.6"x4" .

Weight: 0.8 lbs.

Connection: 3/16" male spades.

Learn More

MAGNET SCHULTZ OF AMERICA - S-06625 - Solenoid, DC.

Voltage: 24VDC, 5W.

Continuous Duty Cycle

Coil Resistance:15 ohm

23 ounce at 0.05 inch.

Box Frame 1.2"x1.2"x1".

Additional Information: https://magnet-schultzamerica.com

Learn More

MAGNET SCHULTZ OF AMERICA - S-06224 - Solenoid, DC. Family R16X9

Operation: Pull.

Holding Force: 125 Oz

Load force: >48 oz.

Stroke length: 0.5.

Duty cycle: continuous.

Coil: 24VDC, 19W, 0.83A 29 Ohms.

Plunger config: Round w/slot & hole.

Mech: 3/4-24 Collar w/Nut.

Body dim: 1"D x 2"L.

Weight: 0.22 lbs.

Connection: 5" 22 ga leads.

Additional Information: https://magnet-schultzamerica.com/

Learn More

MAGNET SCHULTZ OF AMERICA - MSA - S-0-6171 Solenoid, Tubular Cylindrical.

Pull type, 12VDC/72 Ohm coil.

Holding force: 4.5-oz.

Duty: Continuous.

Body dimensions 0.44"-OD x 1.67". 

Long threaded bushing mount; max pull from end of shaft is 1".

Armature size: 1.44" long x 0.157" D.

Nut and washer provided.

Learn More

MAGNET SCHULTZ OF AMERICA - MSA/0022 Solenoid, DC.

Magnet-Schultz of America (MSA) is a leading manufacturer of specialty and custom Magnetic Latching Solenoids and Magnetic Latch Mechanisms. These energy-saving products provide a bi-stable device that requires “zero power” to remain in either the magnetically-latched or unlatched position.

12VDC.

Tubular/Cylindrical

Dimensions 0.44" D x 1.662" Long including unextended Rod 0.157" D.

Alternate: R 7X9/6172

New

Learn More

GUARDIAN - A420-057784-00 Solenoid.

Voltage: 120VAC Intermittent duty.

With 0.5 uF 400VDC capacitor.

Learn More