Temperature Sensor

Thermtrol/Klixon - 7AM Series Thermal Switch - 7AM205A5-823 - 90C Switch, Thermal. NC Cut-Out.

Klixon 7AM thermal protectors prevent overheating in a variety of consumer, industrial and commercial products. It is a miniature, snap-acting, thermally operated device that is a proven performer in protection technology. 

Thermitrol or Klixon (Devision of Sensata) 7AM Series Snap Action Thermal Switch. 7AM205A5-823 Normally Closed contact opens at 90 Deg C. (194F) Mount: PCB, 2 pin, Radial Leads w/1/4" nickel leads. For overcurrent and overcharge protection.

Dimensions: 43" wide x 0.80" Long (0.952 high including leads) x 0.2" deep. Current Ratings 16 VDC @20 Amps, 115VAC @ 22Amps, 277VAC @ 8 Amps, 600VAC @4 Amps. Good for several amps and 120 Volts.

In order to achieve optimum heat transfer from the protected medium or ambient to the thermostat, the 7AM has been designed with the case connected to the bimetallic disc. This feature makes it necessary to electrically insulate the 7AM from the mounting surface. 

Applications: Battery Packs, Battery chargers, Permanent Split capcitor motors, Shaded Pole Motors, HID ballasts, Florescent lighting ballasts/transformers, Vacuum cleaners, Recessed lighting fixtures, Automotive accessory motors/solenoids ect.. - PC boards.

More information: 

UL/CUL Approved

Learn More

Stemco - 402-396 L200H7 Thermal Cutoff Switch. Normally Closed L200, 170 Degree.

Bi-Metalic Disc, Snap Disc, or Snap Switch thermostats are bimetal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps” from a convex to a concave shape at a set temperature. When the disc “snaps”, it either completes or interrupts a circuit. Snap Disc thermostats have many practical applications. They are used to ensure the process temperatures do not exceed the thermal limits of the equipment or process. The most common application for a snap switch or snap action thermostat is as an over-temperature protection (or OTP) failsafe.

Because of their small size and low mass, the response time of the snap switch design is extremely rapid compared to other commercially available thermostatic devices. Additionally, the bimetal element of a Snap Disc does not carry the current, but acts as the force to open and close the contacts. Thus snap action thermostats have a long life at relatively high currents – up to 16 amps for the ½ inch series – making snap switches the first choice of many OEMs.

Stemco 402 Series Automatic Snap-disc Autou Reset Thermostat.

Thermal Cutoff. Normally Closed SPST Switch L200, 170 Degree.

Mount: Surface, Two slotted mounting holes 1.65" apart.

Current/Voltage Ratings: 15A, 120 VAC 

Male 1/4" lugs spaced 1.75" apart.

Life: >100,000 Cycles

Proudly Made in USA

Applications for Disc Thermostats include: Coffee Makers, Washer & Dryers, Dishwashers, Electric Heaters, Ovens, Gas Furnaces, Fireplaces, HVAC, Electric Signs, Greenhouses, Pool Systems, Freezers, Refrigerators, Spas, Vending Machines, Security Systems, Motors, Light Fixtures, Power Supplies, Microprocessors, Business Machines and Table Top Appliances.

Learn More

THERM-O-DISC - 36TX22 F223-45F

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap–action of the bimetal disc provides high–speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC, and 16 amps at 250VAC. The 36T carries global agency recognition and is used in a wide range of applications including coffee makers and other small appliances, gas furnaces, clothes dryers, and dishwashers.

Thermostat, Thermal Cut-out. Normally Open Contact (NO).

Two male 3/16” (4.8mm) Quick Clade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Mount: panel, round 17.7mm with 24mm centers and has (2) male 4.8mm quick connects which can also be soldered to.

The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC. 

Normally open Contacts closes at 223 F and opens when the temperature drops to 178F. 

Flange mount 1/2" Bimetal Disc switch.

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

Minco Products - S25FAY36B - Thermal Ribbon.

Resistance Thermal Device, Ni-Fe 702 Ohm@34 Degrees C.

Element for Temperature Sensing / Control

Temperature: 100degC to +130degC.

Material: Nickel-Iron.

Dimensions: 3/4" Square Flat Element with Mylar Insulation and 55"

30AWG Teflon Wires.

Learn More

Cutler-Hammer / Eaton - 10172H- 10172H 334A - Thermal Overload Switch

Status: Discontinued

Pilot Duty Ratings: 115-230 VAC, 30A

Body Approximate Overall Dimensions: 2.2" x 1.95" X 1.0"

New Old Stock - This Item has no Shelf Life

NSN 5925-00-783-5581

Made in USA

Learn More

Temperature Sensor with cable, used on digital thermometers on boats & RVs - Learn More

MINCO PRODUCTS - S3082N80Z36 - Temperature Probe / Thermocouple.

Minco temperature sensors deliver reliable, accurate, repeatable and cost-effective temperature measurement across a wide variety of highly specialized uses in a variety of markets including medical, aerospace, power generation, industrial, commercial and more. Minco’s advanced temperature probe technology comes in multiple standard and custom-engineered configurations to meet any combination of requirements including sensing element type, temperature range, thermal response time, vibration resistance and mounting method. 

Allows immerse in water, steam, or other liquids and gases.

Measure the temperature of fluid, gas, or gel in industrial applications and production environments.

Resistance: 650 Ohm (670 Ohm at room temperature PTC), (Resistance raises with temperature).

Material: 316 Stainless Steel. 

Connector Type: Bare Wire

Dimensions: 0.188: OD (4.7mm) x 8" long.

Applications: Appliances, Duct, Food and Beverage, HVAC, Ovens, Packaging, Pharmaceutical

New Old Stock

Made in USA

Learn More

NTC - N10SP025M-5 - Thermistor.

-40 Deg C to 170 Deg C.

Tolerance: 20%.

Resistance: 25 Ohm @ 25 Deg C.

Thermal time constant: 56s.

Package: radial leads.

Dimensions: 10mm D x 5mm.

Made in Taiwan

Learn More

Emerson THERM-O-DISC - 36T21-11040-L85-40 - Thermistor. Bi-metal Snap-Action Thermostat. Normally Closed.

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC. quality, reliability, affordability, versatility and world-wide agency approvals of the 36T Series makes it the snap-action thermostat of choice for a wide variety of temperature control applications.

Bimetal snap-action thermostat.

Mount: Panel/chassis suface mount bracket.

Contacts are 2 axial crimp or solder lugs. 

Thermostat, Thermal Cut-out. Normally Open Contacts

Mount: panel, round 17.7mm with 24mm centers

Snap Action SPST Contacts Automatic Reset

Surface Mount where Blade Terminals positioned at 90 Degrees

Set Point: Normally Closed contact opens at 85 F and closes when temperature lowers to 45F. 

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

QUALITY THERMISTOR INC - QTLC-14C3 - Thermistor. NTC.

Status: Discontinued

Resistance: 10,000 Ohms at 25 Deg C.

Curve tracking: 0.2C (0 C - 70 C).

Material: Epoxy Bead.

Bead diameter: 0.095"

Package: radial 3" long, #32 Awg. (.0075") bare leads.

RoHS Compliant.

Learn More

National Semiconductor Corp - LM34CH Sensor, Precision Temperature.

The LM34 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Fahrenheit temperature.

Status: Discontinued

Calibrated directly in degrees F. Linear +10.0mV/deg F scale factor.

1.0F accuracy guaranteed (at +77F).

-0.5 - 3V

Range: -50 to +300F.

Suitable for remote applications.

Package: TO-46 metal.

NSN: 5905-01-366-1770

Learn More

National Semiconductor Inc - LM335H - IC.

Precision Temperature Sensor.

Local 40 C to 100 C10mV/ K

Accuacy: +/- 6 C (+/-9F)

Package: TO-46 Metal Can.

Note: National Semiconductor is Now Texas Instruments

Genunine National Semiconductor - New Old Stock

Learn More

BARBER COLEMAN - 10EV0J00-000-0-00 - Series 10 Temperature Controller with LED Readout.

Dimensions: 2.0" x 3.8" x 5.0"   (5.1 cm x 9.5 cm x 12.7 cm)

Weight: 0 lbs 9.9 oz (0.3kg )

Complete with manufactures instruction and hardware kit.

Made in USA

New

Learn More

ASHCROFT - 30EI60R - 91833 - 50-EI60-E025 0/250F - Industrial Thermometer, Bimetal 5".

The stem on these dial thermometers are mounted on the back. They thread onto pipe or tank connections and measure and monitor temperatures.

Range: 0-250F.

Face: 5" Diameter.

Accuracy: 1%

Case Material: Stainless Steel

Stem Material: 304 Stainless Steel

Window Material: Glass

Connection Location: Back

Type E1.

Connection: 1/2" NPT, every angle.

Stem Length: 2-1/2".

Range: 0 Degrees to 250 Degrees F

Made in USA

New In Manufacturer's Packaging.

Learn More

AMETEK US Gauge - 8544-152 - 138180 - Remote Reading Vapor Actuated Temperature Gauge

Series 8000

Gauge Dial 2-1/2" Diameter, Syel, White Background with Black Letters.

Case: Drown Steel, Black Finish

Ring and Window: One Piece Polycarbonate, Threaded

BOURDON TUBE: Non-ferrous

Capillary: Brass Armored, 10 Foot Length

Range: -20 to + 120 Deg F. (-28 C to 48 C)

Connector: 1/2-15 NPT Brass Union.

Alternate P/Ns: 03-13-85 H1, 138180.

 

Learn More

Thermistor, precision. Zero power resistance Ohm: 10K Ohm. Ratio Ohm: 23.51 @ 25 Deg C / 125 Deg C. �0.2�C Interchangeability Tolerance (0 to 70�C). Working temperature maximum: 200 Deg C. GEM series, glass-encapsulated hermetic package. Learn More

YSI - 55004 Thermistor, Precision.

Zero power resistance Ohm: 2252 Ohm.

Ratio Ohm: 29.26 @ 25 Deg C / 125 Deg C. 0.2C Interchangeability Tolerance (0 to 70C).

Working Temperature Maximum: 250 Deg C.

GEM Series, Glass-Encapsulated Hermetic package.

Alternate: TE Connectivity 055101

Learn More

Thermistor, precision. Zero power resistance Ohm: 10K Ohm. Ratio Ohm: 23.51 @ 25 Deg C / 125 Deg C. �0.1�C Interchangeability Tolerance (0 to 70�C). Working temperature maximum: 75 Deg C. Epoxy encapsulated package. Learn More

YSI - 44016 Thermistor, Precision.

Zero power resistance Ohm: 10K Ohm.

Ratio Ohm: 29.26 @ 25 Deg C / 125 Deg C. 0.2C Interchangeability Tolerance (0 to 70C)

Working Temperature Maximum: 150 Deg C.

Epoxy Encapsulated Package.

Additional Information: http://www.advindsys.com/Manuals/YSIManuals/YSICatalog-1998.pdf

Learn More

YSI - 44011 - Thermistor, Precision.

Zero power resistance Ohm: 100K Ohm.

Ratio Ohm: 34.82 @ 25 Deg C / 125 Deg C. 0.2C Interchangeability Tolerance (0 to 70C)

Working temperature maximum: 150 Deg C.

Epoxy Encapsulated Package.

Learn More

YSI - 44004 Thermistor, Precision.

Zero power resistance

Ohm: 2252 Ohm.

Ratio Ohm: 29.26 @ 25 Deg C / 125 Deg C. 0.2C Interchangeability Tolerance (0 to 70C).

Working temperature maximum: 150 Deg C.

Working temperature maximum: 150 Deg C.

Epoxy encapsulated package.

Additional Information: 

https://users.obs.carnegiescience.edu/crane/pfs/man/Electronics/Omega-44000-thermistors.pdf

Learn More

EMERSON THERM-O-DISC - 36TX21-13126 L203-36 - Thermostat, Thermal Cut. L203-36. Normally Closed Contacts

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

Thermostat, thermal cut out.

Temperature. Snap-action.

Mount: SMD bracket with (2) 1/8" male quick connect terminals.

Mount: Panel, round 17.7mm with 24mm centers

Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Set Point: Normally Closed Contact opens at 203F and closes when temperature lowers to 167F. 

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

THERM-O-DISC - P1H503TTR

Glass axial lead NTC Thermistor. Through hole Mount, Tubular Package, Resistance 50000.0 Ohms, Tolerance 2.0%, Temperatur seensing.Therm-O-Disc MCPG T/R Partial reel CUT New parts.

Resistor Type: NTC THERMISTOR

Mounting Feature: THROUGH HOLE MOUNT

Number of Terminals: 2

Operating Temperature: 0.0 C to 100.0

Package Shape: TUBULAR PACKAGE

Resistance: 50000.0 ohm

Terminal Finish: TIN

Terminal Placement: AXIAL

Thermal Sensitivity Index: 4004.0 K

Thermistor Application:                 TEMPERATURE SENSING

Tolerance: 2.0 %

Learn More

National Semiconductor Corp - LM34CZ - Sensor, Precision Temperature.

The LM34 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Fahrenheit temperature. The LM34 thus has an advantage over linear temperature sensors calibrated in degrees Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Fahrenheit scaling. The LM34 does not require any external calibration or trimming to provide typical accuracies of ±1⁄2˚F at room temperature and ±11⁄2˚F over a full −40 to +300˚F temperature range.

Calibrated directly in degrees fahrenheit.

Linear +10.0mV/degF scale factor.

1.0F accuracy guaranteed (at +77F).

Range: -40 to +300F.

Suitable for remote applications.

Package: TO-92 Plastic.

Learn More