Special Switch

EAO SWITCH - 704.900.3 Contact Block, Switching Element.

Configuration: DPST, 1Pole

Switching Voltage: 500VAC

Switching Current:10 Amp

Contacts: 2 Normally Closed, Silver

Terminal: Screw Terminal

Switch System: snap-Action Switching

SVHC:No SVHC (18-Jun-2010).

Terminal type:screw.

Rohs compliant.

More info: http://products.eao.com/index.php?IdTreeGroup=279&IdProduct=54345

Learn More

Contact block for switch. One NO 10Amp 500VAC (250VDC 0.25A, 125VDC 0.5A). Slow make switching element. Screw terminal. Listed: CSA/UL 827E. Green. Learn More

EAO SWITCH - 61-9932.10 - Front Bezel /Switch Cap, 61 Series.

Mounting Cut-Out: 26mm

Non-Illuminated Pushbutton and square and rectangular keylock switch.

Learn More

ELECTRONIC CONTROLS INC - 801-12C/12 - Power Relay, 12PDT-1Amp

The 800 series Dust-Tight Relay is protected against normal ambient dust conditions. It is designed for use in controlled environment such as test areas and network management centres. It is used for control interlock and indicator circuits. The connectors are a vital part of T-Bar switching technology. While T-Bar Connectors are recommended, all terminals of T-Bar relays and switches are solderable.

Product Range: 800 Series

Coil: 12VDC "T-BAR"

Coil Resistance: 49.1-Ohm

Mount: Panel

Switch/Relay Plug-In Relay

1/8" QC Terminals

Double marked C8501-011-2

Applications: Industrial, Computers & Computer Peripherals, Communications & Networking, or Machinear.

Alternate: Manufactured by OLYMPIC CONTROLS

Made in USA - New Old Stock

Learn More

CUTLER-HAMMER - 47A4446G36 - Hardware.

Shaft assembly for Molded Case Circuit Breaker Accessory Handle Mechanism.

Amperage Rating: 30-60-100-200 Amp switches.

Series: Series C

Shaft Length: 6.5 in

UPC 786679-65180.

Style 47A4446G36.

Learn More

Switch, toggle. Switch guard only/face plate. Material: metal. Fits 3 hole mount type toggle switches. Each with rubber boot. Learn More

Switch, hardware. ON/OFF Silver vertical legend plate for standard 15/32"bushing toggle switches. Keyway by OFF (bottom). Size: 1" tall. Learn More

Custom Component Switches CCS - 642VH18 – Dual Snap Vacuum Switch, 15Amp 125 PSIG New. CCS Vacuum/Pressure Switches are high quality maintenance free instruments. They are designed by using the Dual-Snap Belleville Principle. Status: Discontinued Switch, Vacuum. Increase Vacuum: 25 IN HG Decrease Vacuum: 20 IN HG Electrical: 15 Amp 125/250/480 VAC 0.4Amp 125 VDC 0.2Amp 250 VDC New Old Stock – Rare - Difficult Component to Find Made in USA Learn More

Compac Engineering - Erecta Switch - 5-20-PP - 5-20-PP - Angle Body Flow Switch, Prolypropylene

The 5-20-PP Angle Body Flow Switch is the standard in OEM low flow sensor applications. 5-20 flow switches have a built in clean out port allowing the removal of the spring and poppet without dis-assembly of your plumbing. 5-20 flow switches are available in 5 factory flow sensor set points (with titanium spring in), .1 gpm, .25 gpm, .5 gpm, .75 gpm, and 1 gpm. Mount the flow switch vertically without the titanium spring and sense even lower flow rates. Built in 9/16 UNF female bosses are intended to be used with one of  several separately purchased accessory fittings.

Polypropylene version is suitable for water, soaps, and light acid flow sensor applications.

Type: Flow

Material: Polypro

Weight (lb): 0.180

Flow Range: 0.50 gpm

Adjustable: No

120-240VAC PILOT DUTY SERIES 5 PERVASIVE FLOW SWITCH0.8AMP

New Old Stock

Learn More

Chicago Switch - 3-334 - EIA50 - 034-550-001 - Switch, Pushbutton.

Contacts: NO. - Heavily Gold Plated 

Hermetically Sealed Can

Actuator: SPST NO (Form 1) Momentary.

Can Material: Nickel-Silver

Actuator: Thermoplastic (PBTP)

Rating: 100mA @125 VAC

Connection: TO-39 To-39 push button switchype, Metal Can 2 pin.

Lead Length: 0.149" Llong with spacing @ 0.20".

Mech: PCB Mount.

Life: 1,000,000 Actuations

Panel Hole: 0.3674" Diameter x 0.260" High. (Top Can Diameter is 0.325")

Note: Black Button Actuator is 0.171" D.

Vintage Chicago Switch - New Old Stock -  Difficult to Find

Applications: Reset Switch / Detect Switch

Note: ITW Switched (Formerly Licon / Chicago Switch) Formerly Chicago Switch

Alternate: ITW Series 034 P/N 034-550-001

RoHS Compliant

Made in USA

Learn More

Cherry Electrical Products - OE6930A0 - Switch, Pushbutton.

Contacts: SPDT. 1 NO & 1 NC, Contact Material: Silver-CdO

Contact Ratings: 10 Amp 125/250VAC (1/3HP, 125/250VAC).

Actuator: 3 Position. Round Plunger - With Pull-To-Cheat Feature , Maintained, Momentary push. 

Terminals: Quick Connect, Brass (Common AG plated) 

Temperature Range: -40 to 85C

Connections: 3/16" QC terminals.

Operating Force: 475 g, Stainless Steel Spring

Mounting: Panel, Snap-in Mounting. Panel Cut-out: 14mm X 28.6mm.

Body: For hole 28mm to 30mm long x 13.3mm min x 24.7mm behind panel plus contacts.

Housing Material: ThermoPlastic Polyester, White.

Operation Life According to EN61058-1: 50,000 Cycles

Listed: UL, CSA, VDE. RoHS Compliant

Alternates: ZF Electronics 2524438, Vishay 1369901, ZF Electronics 2103633

Complex Difficult Switch to Find

Learn More

ALCO - 131AK - Pushwheel Switch, BCD Rotary.

BCD Pushwheel Thumbwheel Switch

0-9, Pshbutton.

Alternate: SMC131AK, DPS8131AK, SH6131AKK2, 65H7577

NSN 5930-01-123-8239

Complete with attached circuit card and a 9 position female connector.

Learn More

Disconnect switch operator. Flange Switch Instr. DSFHN-HS12 and the OT100E3 (1SCA022398R4400) GP Switch/Interrupteur, 3P 3PH 100A 600V. Note: Alt P/N: 662019001135. Listed: UL/CSA. Learn More

Grasslin - BT-120 - Photoelectric Switch, Flush Mount, SPST NC, 120VAC, 50/60Hz, 1500W, 1200VA

Photoelectric switches control the power to a connected appliance or fixture by measuring the light falling on the lens (also called the "eye"). These switches are mostly employed in outdoor locations to allow lights to turn on automatically after the sun has gone down.

Status: Discontinued

Grasslin Photocontrol Flush Mounting

Heavy Duty Commercial Model BT-120 Photoelectric Sensor, Button Type

Power: 120VAC 50/60Hz, 3 Wire 

Switch: SPST Normally Closed (NC)

Switch Capacity: 1500 Watts Tungsten

Switch Capacity: 1200 VA Ballast

Raintight Enclosure

Dusk To Dawn Operation

Housing: Black Thermalplastic

Operating Temperature: -40F to 140F ( -40C to 60C)

Mounting Hole (Minimum): 11/16" (0.688) (17.49mm)

Thicknees Mount Surface (Maximum) : 3/8" (0.375") (9.54mm)

Approximate Body Dimension: 2.0" Long X 1.0" X 0.80"

Applications: All night Safety and Security for walkways, entrances, parking lots, farm yard lighting, recreational areas. Protection Control for homes, schools, commercial and industrial buildings.

In Manufacturing Packaging with Instructions. 

UL, CSA Listed

UPC 147305930

Replaces: Paragon LB201-00, Intermatic K4021, Tork 3000, ALR AA-105, Fisher Pierce FA-105, Precision A-105

 

 

Learn More

27mm long x 12.7mm wide x about 13mm high. STOCK SILVER PLATED METAL ( ? Phosphor bronze? ) SPRING CONTACT - sticky back with 3.5mm mounting hole, just to be sure. PACKAGE OF 10

Learn More

EMERGENCY Cable Pull Switch: Latching Contact - reset by standard pushbutton on the side. Length of protected area: 165feet / 50meter cable. Right Cable Mount. 2NO and 2NC 10Amp - 10,000-operations. NEMA1,2,4,13. IU:400V Ulmp:4kV AC15 240V-3A CE Learn More

Square D - H363 - Heavy Duty Safety Switch. 3P 100Amp 600VAC.

Square D Safety Switch, Heavy Duty Fusible

600 VAC/VDC, 100 A, 30 hp, 50 hp, 3 ph, 3 Pole, 3 Wires

10/200 kA Short Circuit Current

TPST, Handle Actuator,

NEMA 1, Surface Mount, Lug Terminal

Dimensions: 10.5 in W x 6.38 in D x 21.25 in H, Steel.

New

Learn More

Safety switch. 3P 200Amp 600VAC/VDC 3 Wire. Type VBII NEMA Type 3R Enclosure. Non-Fused. Learn More

Safety switch. 3P 60Amp 600VAC/VDC 3 Wire. Type VBII NEMA Type 1 Enclosure. Non-Fused. Learn More

Safety switch. 3P 30Amp 600VAC/250VDC 3 wire. Type VBII NEMA Type 3R Enclosure. Non-Fused. Learn More

ITT Schadow - 3-119 - Switch, 15 Button Pushbutton Selector Switchbank.

Each Spring Loaded Switch is 4PDT

Switchbank 15 Position 4PDT Interlocking, Cancelling.

Ganged Switches with Only One Switch is "On" At a time.

Dimensions: 12.25" Length X 2.25" Depth X 0.785" Height.

Note: Complete with Push Black Knobs.

New Old Stock

Learn More

Subminature Basic Switch SPST-NC Contact Actuator Pin plunger - 30VDC - 0.1Amp Learn More

PHOTOELECTRIC SENSOR, 120VAC, .5AMP MAX LOAD, 2mA LEAKAGE, SHORT CIRCUIT PROTECTED. Learn More

NORMALLY OFF CAPACITANCE SWITCH, STANDARD DUTY 120VAC OR 10AMPA RESISTIVE @125VAC, DPDT RELAY, 20VDC INTERNAL POWER SUPPLY. Learn More