Special Switch

Eaton - CUTLER-HAMMER - 8654K2 DPDT Momentary

Flush Mount Utility Type Switch

Mount: Bracket

Termination: Screw Terminals

Genuine Cutler-Hammer, Rare New Old Stock

Learn More

CANOPY PULL SWITCH WITH CHAIN AND CORD SINGLE POLE - WIRE LEADS - 3/8" NIPPLE 1/8" - 27 THREAD RATING 3 A - 250V 6A - 125V

Learn More

Optek - OPB962T51 - Optical Switch

Number of Pins: 5

Rise Time: 70 ns

Fall Time: 70 ns

Output Voltage: 30 V

Forward Voltage: 1.7 V

Forward Current: 40 mA

Learn More

MACOM Industires - ColorMax - SM-701- AB-2 - A-B Manual Switch

Three Coaxial Type F Jacks. The 2-Way Manual Switch Box is an easy way to share one jack with two devices. Simply run a cable from your jack into the switch box and cables from the switch box to your devices. This switch box is great for sharing a data line with a PC, telephone, credit card machine, printer, and more. 

Share Two Devies w/ One Port

Cable TV A-B Switch with "F" (Coaxial RF) Connectors.

Flanges for mounting with thru holes.

Durable Extra Heavy Duty Toggle Switch

Frequency: 54-1000 MHz

Color: Brown PVC

High Quality Switch - New Old Stock

Note: A switch allows you to connect multiple video sources to 1 display. A splitter allows you to take the video from one source and then display it on multiple displays depending on how many outputs the splitter has.

Made in Taiwan

Learn More

Switch, P/B. Back operator only for GE heavy duty illuminated switches. Learn More

General Electric - CR2940UN200E Switch, key.

Front operating section for heavy duty 3 Position selector switches.

Heavy Duty Oiltight Selector Switch

Key removable in center position only.

Cylinder Lock. 

NSN: 5930-01-084-2605

Proudly Made in USA

Learn More

Switch, Bidirectional Stepping, Direct Drive, 6 Pole 25 Position. Shorting Contacts, Stepping Coils: 12 VDC (9-Ohm requires use of current-limiting resistor in stepped position for pulses over 20 milliseconds long} Interrupting contacts and end-of-travel contacts for each direction.: P57283 BSS 156. Dimensions: 146mm x 138mm x 66mm. Manufactured in England for Imtra Corp, Mass. In factory box. Learn More

Switch, motor. NEMA, Toggle, Starter Type Manual, 16 Amps AC, Max Voltage 230, NEMA Type 1, No of Required Thermals 1, Number of Poles 1, Height 4.16 In, Width 2.28 In, Depth 2.63 In, 1 HP @ 1 Phase - 115V, 1 HP @ 1 Phase - 230V, 1 HP @ 115VDC, 1/4 HP @ 230VDC, Standards UL (508)/ CSA. Learn More

Gems Sensors - ELS-1100 138167 Electro-Optic Sensor, Liquid Level Switch. 

ELS-1100 Series Single-Point Level Switch is a compact, economical, no moving parts polysulfone level sensor with built-in switching electronics. A variety of mountings, power requirements and electrical terminations are available. These level switch units are suitable for high, low or intermediate level detection. Installation is simple and quick through the tank top, bottom or side. The sensor offers ±1 mm repeatability and broad liquid compatibility. They are not recommended for use in any liquid that crystallizes or leaves a solid residue.

General Purpose  & Economically Priced

5VDC Supply.

Output: TTL/CMOS Compatible. Open Collector Output May Sink 40 mA UP TO 30 VDC.

Probe Wet-Sink.

Material Construction: Polysulfone or Nylon Housing and Prism

3 Wire, 1/4" NPT Mounting.

Operating Pressure: 0 to 150 PSI

Operating Temperature: 0 F to 176 F

Lead Wires, 22 AWG, PVC Jacketed

EMI Susceptibility: Meets (MIL-STD-461B Part 2 Modified) Specification of 10 V/M for Frequency Range 30 to 1000 MHz

UL Recognized

Additional information: https://www.gemssensors.com/search-products/product-details/els-1100-single-point-level-switch-138167

New - Proudly Made in USA

Package of 2 (Note: Typically sold in singles, but our sale is two Sensors per box at price of 1).

Learn More