Hardware
Electronic Hardware Components & Parts
Electronic Surplus carries a broad variety of surplus hardware components and parts. We have electronic knobs, gears, bearings, enclosures, spacers, and much more. Our electronic hardware for sale comes from top-grade manufactures like 3AM and ABB Control.
Some of our electronic hardware for sale comes in the manufacturer’s original packaging, while others are slightly used. We’re proud to say that when you order a used electronic hardware component from Electronic Surplus, you don’t have to worry about quality. Our team of experts checks each and every used item before we put it up for sale.
Shop our surplus hardware components below. Is the part you need out of stock? Request it here.
- Plast-A-Matic - Project Box - Enclosure. Instrument Enclosure, PlastAMatic 2 Piece Assembly.IN STOCK - MORE THAN 1,000 READY TO SHIP!
Plast-A-Matic - Project Box Enclosure.
Instrument Enclosure, 2 piece top & bottom.
Snaps together, requires 4 screws (not included).
Front panel would be approximately 5.25"wide x 2.5" tall (not included).
Material: Plastic.
Actual Dimensions: 138 x 71 x 130mm deep.
Color: Gray.
Learn More - ALCO KNOB - 6-347 - Hardware, Knob. For 1/4" / 6mm Half Flatted D Shaft.IN STOCK - MORE THAN 500 READY TO SHIP!
ALCO KNOB Hardware, Knob. Knurled
Design: Knurled, Straight
Indicating. Press-fit for 1/4" Flat Flatted D Shaft / 6mm Flattened D Shaft.
Two rows of surface control ridges around perimeter.
Material: Aluminum with Vertical Pointer and Internal Plastic Insert.
Dimensions: 0.85" OD x 0.88" High. (21.7 X 22.36mm)
Color: Satin Silver.
Will fit 1/4" Shaft but tight.
Simliar to TE Connectivity KN700A1/4, KN700B1/4
Applications: Stereos, Amplifiers, Instrumentation, Guitar, Volume, Tone, Balance Controls.
Vintage - New Old Stock
Learn More - ALCOKNOB - KNP-900B 1/8 - Equipment, knob. For 1/8" shaft, Stereos, Amplifiers, Instrumentation.Special Price $5.98 Regular Price $8.00IN STOCK - MORE THAN 100 READY TO SHIP!
ALCO KNOB - KNP-900B Series KPN Knob.
Status: Discontinued
Fits 1/8" shaft, with one set screw.
Heavy, Silver. - Stright Knurled
Matrial: Black Anodized Aluminum with Vertical Pointer.
Dimensions: 0.931 OD x 0.54" high. (33.6 X 13.7 mm)
Applications: Stereos, Amplifiers, Instrumentation. Vintage - Newer Used - Genuine Alco - New Old Stock
- ACME - 6-349 - Hardware, Knob. 1/4" Flattened D Shaft. Stereo , Control, Volume, HI-FI, Amplifier. Package of 2Special Price $6.98 Regular Price $8.50IN STOCK - MORE THAN 1,000 READY TO SHIP!
ACME Hardware, knob.
For 1/4" flattened shaft.
Black Band 0.74" around it for gripping easily.
Material: Attractive Chromed Aluminum.
Dimensions: 0.62" D x 0.90" high.
Color: Silver.
Note: The orientation of the indicator line is straight up from the center of the 1/4" (D) circle.
Upgrade your Old System with High Quality New Old Stock Knobs.
Applications: Stereos, Amplifiers, Instrumentation.
Vintage - New Old Stock
Package of 2
Learn More - Mueller - BU-P3770-0 - Commercial Binding Post, Test Jack. Black Deluxe 5-Way Connector, Gold Plated Tellurium Copper.IN STOCK - MORE THAN 1,000 READY TO SHIP!
Mueller - BU-P3770-0 - Commerical Binding Post, Test Jack. Black Deluxe 5-Way Connector, Gold Plated Tellurium Copper.
Binding posts are used to make quick attachments with test lead wire, connecting them to electronic test instruments. One common design for binding posts is called a universal or five-way style. This style allows for the joining of multiple types of connectors such as unshrouded or retractable 4mm banana plugs, bare wire, or spade, pin connectors, uninsulated wire, and more. Tellurium copper reduces EMF noise for a cleaner signal.
Head Style: Knurled
Termination: Threaded and Turret
Termination Thread: 8-32
Current Rating (Amps): 15 A
Voltage: Hands-free testing to 2500 VRMS
Contact Material: Tellurium Copper, Gold Plated
Plating: Gold
Color: Black
Cross Hole Diameter: 0.096" (2.43mm)
Head Size: 0.440" OD (11.18mm)
Material – Insulation: Polycarbonate (PC)
Nut Material: Brass, Gold Plated
Panel Thickness: 0.070" ~ 0.250" (1.77mm ~ 6.35mm)
Temperature: -50 C to 115 C (-58 F to 239 F)
RoHS 3 Compliant
Alternates: Digi-Key 314-1200-ND, Mouser 548-BU-P3770-0, Allied 70272537, Pomona 3770, Pomona 3750, Keystone 4097, Keystone 7017, S-H266H, 004136, BU-P3750-0, DS-BU-P3770, BP21B, Abbatron 1517, 1514, 6937K62
Applications: Special Effects Equipment, Analytical Instruments, Test Equipment, Loudspeakers, Audio Amplifiers
- Unidentified MFG - MS-308 - Enclosure. Flange Mount with Lids.Special Price $6.98 Regular Price $8.50READY TO SHIP - ONLY 9 LEFT IN STOCK!
MS-308 Enclosure.
Flange Mount with Lids.
Material: Sturdy Ridgid Plastic, Black.
Dimensions: 7.5" x 4.5" x 2.25" OD less 0.7" wide flanges with four mounting holes.
Metal inserts for seccuring front cover panel.
Box has irregular 1" x 1.16" hole for Molex connector or other exit and three 0.157" holes in bottom.
Learn More - Motorola - MNT62312B1 - Hardware, Pole / Post Mount Bracket with Two U-Bolts, Lock Washers and Nuts.IN STOCK - MORE THAN 500 READY TO SHIP!
Motorola - MNT62312B1 Antenna Mounting Hardware.
Status: Discontinued
Aluminum Direct Post Mounting Bracket.
Right-Angle 2-5/8" Wide x 4-3/8" Long with 1 -1/8" Diameter Hole.
Base has with four 1/2" x 1/4" slots
U-Bolts for 1 1/2" Diameter Pipe
Two 2" x 3", U-Bolts Threaded 1/4"-20 with Lock Washers and Nuts,
Zinc-plated steel U-bolts have good corrosion resistance in most environments.
Quality Motorola Product.
Application: Motorola MNT62312B1 bracket for gcntm20a3a and others.
Weight: 0.5 lbs.
Note: Commonly sold as an option with various Motorola antennas such as GPS Timing and Tetra Mobile Antennas.
- BIRD - 5-1357-3 - Connector, Electronics Solder Eyelet, Rivet/Eyelet/Terminal. Package of 100.
BIRD - 5-1357-3 Connector, Electronic Solder Eyelet, Rivet/Eyelet/Terminal.
Electronic eyelets are flanged tubular metal conductors inserted into a printed circuit board. They make electrical continuity between the circuitry on both sides of the board, and are an attachment point for soldering component leads.
Type: Solder.
Appears to be Silver Plated Brass (High thermal and electrical conductivity)
Metric Dimensions: Outside lip is 6.1mm OD, 2.9mm ID with a shaft 3.5mm round and 6.7mm tall under Lip.
Inch Dimensions: Outside lip is 0.240" OD, 0.114" ID with a shaft 0.138" round and 0.264" tall under Lip.
Applications: Secure High Current Electrical and Ground Connections or repairs to chassis and PWBs.
Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(this allows the for the right length after the flange is formed)
ID Eyelet inside diameter should be 0.003-0.020”/0.075-0.500mm greater than the component lead diameter for proper fit of the eyelet through-hole component lead.
FD The flange diameter should be sized so that it does not protrude out onto other pads or conductors in the vicinity
OD The clearance in the PCB hole should allow the eyelet to be inserted without undue force but, but should not exceed 0.125mm greater than the eyelet outside diameter.Additional Information: http://www.intl-eyelets.com/short_course_on_electronic_eyelets.htm
Genuine Vintage Bird Electronics Hardware - New Old Stock
Package of 100.
Learn More - Accuride - C133-12D - Ball Bearing 12" SLIDE ASSEMBLY$9.00IN STOCK - MORE THAN 100 READY TO SHIP!
12-Inch long overall. 8.4" Slide Travel Up to 30-pound Weight Bearing.Set consists of (2) zinc electroplated ball-bearing slides and (4) right angle metal brackets and (x) a bunch of screws. Weighs about 2pounds / set. Instruction sheet said "Concealed hinge flipper door slide." Eurpoean hinges Not Included.
Learn More - Gencon Plastic - MS-232 - Enclosure, Ribbed Project Box, 4.9"x4.6"x1.3" ABS Plastic.
Gencon Plastic - MS-232 - Enclosure, Ribbed Project Box, 4.9"x4.6"x1.3" ABS Plastic.
Acorn-Gencon® Plastics provides complete injection-molded product solutions from concept to completion. Engineered design services combined with complete manufacturing capabilities ensure the best project production flow from concept to completion.
Ribbed Box with Battery Compartment.
Material: Durable Plastic.
Shape: Slightly Rectangular
Material: ABS Plastic
Dimensions: 4.9" Long x 4.6" Wide x 1.3" High with 3 Mount Feet.
Overall 6" Wide with Feet.
Removeable Slide Section
Color: Glossy Black.
Applications: Suitable for Electronics
New Old Stock - Made in USA
Note: Screws not included
Learn More - TOMCO - 3472R5 - Series 3400 Pneumatic Slim-Flow Quick-Connect Plug Fitting 1/4" Tube 316-SSTIN STOCK - MORE THAN 100 READY TO SHIP!
TOMCO - 3472R5 - Valved Flareless Tube Plug Fitting
Tomco's precision line of couplers are ideally suited for instrumentation and chemical processing applications.
316 Stainless Steel Construction
Positive roller lock latching mechanism allows 360 degree swivel action
One hand required to connect or disconnect
Viton seals
Smallest possible dimensions with maximum orifice size.
Integral flareless tube port fitting
Temperature range +20F to 400 F
Vacuum Data - connected 29.50 in. Hg
1/4" Tube
Packaged in factory reusable clear protective plastic tube
Note: Valved plug P/N 3472R5 must be used with valved coupler P/N 3452R5
Made in USA
- PANDUIT - PLP1.51-M - Hardware, Cable Ties with Push Mount. 6-1/8". Package of 50.
PANDUIT - PLP1.51-M Hardware, Cable Ties.
Grouping and organized your electrical wires has never been this easy with this convenient PLP1.5I-M cable tie from Panduit. This cable tie has a temperature range of -40 °C to 85 °C. This product comes packaged in bulk, so the parts will be stored loosely. This product is 6 mm tall.
Status: Discontinued
Style: Standard Locking with Push Mount
6-1/8" long (156mm).
Bundle diameter: 1-1/4" (32mm).
Tensile Strength: 178 N Minimum
For panel thickness up to 0.093" (2.4mm).
Max. Bundle Diameter: 32 mm
Operating Temp.: -60 to 85 C
Material: Nylon 6/6.
Color: Natural.
Standards Met UL Recognized (File #E56854), UL 62275 Compliant (Type 1, 11), RoHS Complaint
Package of 50.
Learn More - LORD MANUF. - 204PHC18-100 - Rubber Anti-vibration Isolator Cup Shock Mount 3".Special Price $5.98 Regular Price $12.50IN STOCK - MORE THAN 100 READY TO SHIP!
LORD MANUFACTURING. - 204PHC18 -100 Hardware, Shock Mount.
Size: 3" square.
Mount: Threaded 5/16" Hole.
Material: Rubber and Steel.
Learn More - ITT Cannon - 161051PKG5 - Hardware, knob. Shaft: sq 1/8". Package of 5.$5.00Hardware, knob. For switch banks with a square 1/8" shaft. material: plastic. Dimensions: 0.29" D x 0.272" high. Color: white. Package of 5. Note: Perfect fit for a switch bank like our SKU 1772, not included. Learn More
- CUSTOM - COPPERTEX-B - Copper Finger Shielding Stock/Gasket/Strips. EMI/RFI Shielding Solution, Package of 5.IN STOCK - MORE THAN 100 READY TO SHIP!
CUSTOM - COPPERTEX-B - Copper Finger Shielding Stock/Gasket/Strips.
Beryllium Copper (BeCu) is a high performance metal which can be fabricated into a wide variety of components. Its mechanical and electrical properties make it the ideal material for EMI/RFI shielding products.
EMI/RFI Shielding Solution - Gasket Strip
- Excellent electrical and RF conductivity
- High tensile strength
- High shielding effectiveness
- Superb resistance to corrosion
- Very long lifespan
- Easy installation
- Numerous plating options
- Excellent performance at high temperatures
- Moisture and UV resistant
Berllium Copper Finger Stock - 0.15 x 0.40 x 4.25"L, 44 fingers.
Reverse Bend Spherical Shape
Similar Alternate: Tech Etch 93R1D
New Old Stock
Package of 5.
Learn More - FMC - Anaconda Flexcon - 5-183 - Stainless Steel Flexible Conduit, Spiral Interlock, 1 Inch Outer Diameter.IN STOCK - MORE THAN 100 READY TO SHIP!
FMC - Anaconda Flexcon - Stainless Steel Flexible Conduit, Spiral Interlock, 1 Inch Outer Diameter.
VA single metal strip is loosely double interlock-wound to create an extremely flexible interlocked metal hose.
Rust and corrosion resistant due to chromium content.
Superior durability and strength.
Smooth interior for easy wire pulling.
Extremely flexible for easy installation.
Excellent crush proof qualities.
Withstand approximately 750 degrees F.
Excellent toughness even to low temperatures.
Good forming and welding properties.
For Dry locations.
Dimensions: 1" D x 15.5" long.
Contracted length is 12 1/2".
Inside Diameter: 0.850", Outer Diameter of end fitting: 1.075"
Bending radius 4".
Extremely well suited to protect wiring.
Used for heating elements, thermocouples, automotive,communications, robotics, and aircraft industries.
High Quality - New Old Stock - Bulk Packaged
Note: See SKU 5840 for THOMAS & BETTS - 78-6210-05234 - 5234-TB - Connector for connecting to Box.
Learn More - 3M Scotchlok™ 567 - 7000005879 - Self-Stripping Electrical Tap Connectors - Package of 10
3M Scotchlok™ 567 - 7000005879 - Self-Stripping Electrical Tap Connectors - Package of 10
Self-Stripping Electrical Connector (as manufactured by 3M, part No. 567) capable of connecting a tap wire 18-14 AWG solid or stranded copper to a run wire solid or stranded copper. Connector shall be UL Listed and CSA Certified for 600 volts maximum, building wire: 1000 volts maximum, signs, fixtures and luminaires, and temperature rated 105˚C maximum.
Quick, Reliable Splices are a Snap. And a Squeeze.Scotchlock IDC S/LOK Connector Tap & Parallel.
Electrical IDC 567-Pouch Self Stripping.
Termination: IDC Crimp
Insulation: Fully Insulated
Insulator Material: Polypropylene
Terminal Material: Brass
Wire Size: 18-14 AWG.
: 1.5mm²
Maximum Insulation: 0.145" (3,68 mm) Tap, 0.190" (4,82 mm) Run
Max. Current: 18 AWG - 7 AMPS, 16 AWG - 10 AMPS, 14 AWG-15 AMPS, 12 AWG-20 AMPS, 10 AWG-25 AMPS.
Operating Temperature: 105°C (221°F)
Color: Brown.
Features: Flame Retardant, Hinged Lid(s)
Scotchlok, 600V.
Approvals: UL, CSA
Packaging: Bulk
RoHS Compliant
Package of 10.
Alternates: Newark 57AC5188, Digi-Key 3M157375-ND, Gardner Bender 15-2210, IDC 567
UPC 054007148876
Made in USA
Learn More - Unidentified MFG - PT-517 - Hardware, spacers. Nylon. Package of 100.$5.00Out of stockHardware, spacers. Or thick washers. Material: nylon. Color: natural. Dimensions: 0.377"OD x 0.175" ID x 0.186" thick. Package of 100. Learn More
- Unidentified MFG - PT-160 - Hardware, grommet. 0.5". Package of 50.Special Price $6.98 Regular Price $16.95IN STOCK - MORE THAN 100 READY TO SHIP!
PT-160 Hardware, Grommet.
Material: Rubber.
Dimensions: 0.499" ID x 0.226" thick with an ID of 0.25".
Each side thickness: 0.078".
Color: orange.
ackage of 50.
Learn More - Keystone – 893 - PT-039 - Hardware, Stand-offs / Spacer. Nylon Untreaded. Package of 50.Special Price $5.98 Regular Price $7.95Keystone – 893 - PT-039 - Hardware, Stand-Offs / Spacer. #8 (M4) Screw. These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause expansion. Material: Nylon Unthreaded, Dimensions: 0.170" Diameter hole x 0.375" Long. Package of 50, Made in USA. Learn More
- Unidentified MFG - 8-224 - Shoulder Insulating Spacer / Washers 3/16" ID. Package of 40.
Hardware. Shoulder / Insulating Spacer / Washer
Shoulder washers, sleeve bushings or flanged bushings are designed for a variety of applications. A shoulder washer insulates a screw, rivet or wire from a chassis or assembly. ... The flange on the bushing is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.
Shoulder Washers are designed to provide electric and heat insulation in assemblies where this is a crucial requirement. These products are self-lubricating and corrosion- and abrasion-resistant.
Size: # 8 Screws,
Dimensions: 0.560" OD x 0.170" ID x 0.260" Overall Thickness
Material: Hard Fiber, Nylon
Max. Temperature: 230F
Package of 40.
- Unidentified MFG - 40LT-312 - Aluminum Timing Belt Pulley w/set screws
40LT-312 Timing Belts/Pulleys w/set Screws
Positive drive, no slip Maintain Constant Speed Ratio Aluminum Material For light-duty applications up to 1/4 HP Includes 2 hollow head setscrews and no keyway.
Material: Aluminum
Finish: Clear Anodized
Set Screw: 2
Outside Diameter: 26 mm diameter (1.026") 40 Teeth
Bore Diameter: 6.3mm (0.25")
For use with 1/4" & 3/8" Belts (0.25" -0.33")
Outside Flange Diameter: 31mm (1.25")
(Overall Length 19.85mm high (0.78")
Learn More - Unidentified MFG - 6-031 - Hardware, spacers. Plexiglas 3.39". Package of 10.Special Price $6.98 Regular Price $9.95
Hardware, Acrylic Spacers.
Material: Plexiglass.
Clear Colorless.
Dimensions: 3/4" D x 3.39" high.
One end is drilled 1/4" x 0.8" deep.
Package of 10.
- TEKTRONIX - 213-0182-00 - Cap Screws, 1/4-20 x 1.343" Long. Stainless Steel, Package of 10.Special Price $5.98 Regular Price $8.50
TEKTRONIX - 213-0182-00 - Hardware.
- Socket cap screws generate tremendous clamping force
- Very strong socket head for maximum endurance
- Socket cap screws are great for tight spaces
Allen Hex Key, Stainless Steel
Cap Screws, 1/4-20 x 1.343" (34.1mm) long.
Threaded Area Length: 0.561" (14.2mm) long.
Plus Seat: 0.197" (5.0mm). Head 0.398" (10.1mm) D x 0.584" (14.8mm) long.
Package of 10.
Learn More