Featured Products

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. NAIS/Aromat - VC20-1A-AC120V-K - Relay, AC. Coil: 120VAC 640 Ohm.

    NAIS/Aromat - VC20-1A-AC120V-K - Relay, AC. Coil: 120VAC 640 Ohm.

    $4.95

    IN STOCK - MORE THAN 1,000 READY TO SHIP!

    Relay, AC. Contactor: 120VAC 20A.(12a. ungsten) Coil: 120VAC 640 Ohm. Connection: 1/4" quick connect. Electrical conf: SPST NO. Mech: External bracket 2-hole 1.37"center. Body: 1.36 x 2.1 x 2.23"H. Weight: 5.2 oz. Has a plunger on top to manually activate contact. Heavy duty. Includes mounting bracket. Alt P/N: 96B9285 , BW5550185K. Learn More
  2. JOHNSON ELECTRIC ENGINEERING Ltd - HC615LG - Motor, DC. Reversible PM 6-18VDC.

    Regular Price: $6.95

    Special Price $5.95

    As low as: $5.25

    IN STOCK - MORE THAN 5,000 READY TO SHIP!

    Motor, DC. Reversible PM 18VDC, 100mA, 3500 RPM no load. Torque constant: 49.4 m/Nm/Amp. Dy. Res: 6.84 ohms. Motor Regulation: 28RPM/m-NmTorque: 126m-Nm 2.63Amp at stall. Maximum efficiency: 68%. Torque: 20m-Nm, speed: 2944RPM, current: 0.51Amp, output: 6.17 watts. Maximum power: Torque: 62m-Nm, speed: 1753RPM, current 1.37A. Output: 11.47 watt. Shaft Length: 11mm 0.435", shaft diameter: 3.1mm 0.125". Has an attached pulley: 10mm 0.39" inside diameter x 4.6mm 0.18" inside length. Motor: 38mm 1.495" D x 83mm 3.27" long overall. Rotation: clockwise when viewed from shaft output end with positive applied to positive. Weight: 8 oz. Note: PM = Permanent magnet. Learn More
  3. Power One - HN15-4.5A - Power supply. Output: +15VDC 4.5Amp.

    Regular Price: $45.00

    Special Price $35.89

    READY TO SHIP - ONLY 51 LEFT IN STOCK!

    Power supply. Output: +15VDC 4.5Amp. Input: 100/120/215/230-240V~. 1.7/1.5/0.8/0.8A~ 47-63Hz. Derate 10% for <58Hz operation. Open frame. NIB. Note: Maybe replaced with equal by Condor HN15-4.5-A+. More info: http://www.power-one.com/resources/products/appnote/n_linear_agencyapproval.pdf Weight: 7.4 lbs. Learn More
  4. TEKTRONIX - MI5010 / 50M40 - PROG MULTI FUNCTION INTERFACE w/ 3 50M40 Relay Sca

    Regular Price: $799.99

    Special Price $639.88

    READY TO SHIP - ONLY 1 LEFT IN STOCK!

    PROGRAMMABLE MULTI FUNCTION INTERFACE w/ 3 50M40 Relay Scanner Cards Learn More
  5. Weber Genesis 7628 Igniter Kit for 330 Model - Gas Grill Igniter

    Weber Genesis 7628 Igniter Kit for 330 Model - Gas Grill Igniter

    IN STOCK - MORE THAN 5,000 READY TO SHIP!

    Universal Quad Spark Igniter kit for the Weber Genesis Gas grills (front mounted control panels models) with push button igniter included. Weber Genesis replacement part. OEM Quality, Does not include wiring. Learn More
  6. Hewlett Packard - 6034L - 0-60VDC 10A CV/CC Digital Readouts P/S

    Regular Price: $229.99

    Special Price $183.88

    READY TO SHIP - ONLY 2 LEFT IN STOCK!

    HP 6034L System DC Power Supply HPIB Auto-everything 200 Watt 0-60VDC @ 0-10A RAK MOUNT POWER SUPPLY - Digital Readouts Learn More
  7. AIRPAX - 82227/B82359 - Motor, stepper. 12VDC 2 phase 37 ohm.

    AIRPAX - 82227/B82359 - Motor, stepper. 12VDC 2 phase 37 ohm.

    IN STOCK - MORE THAN 1,000 READY TO SHIP!

    Motors, stepper. Simple 2-phase, 12VDC 48 Step/Rev 7.5deg/step, 37 Ohm Bipolar windings. Dimensions: 35mm, 1.38" D. Attached: 4 wire, 16 inches long. Mounts 1.7" 42mm hole spacing, includes a 15-tooth 1/4" dia nylon gear. Running rate to 1800 step/sec. Weight: 2.6 oz. Learn More
  8. OPTEK - OHD103-00R - Hall Effect Sensor. NPN, latching.

    OPTEK - OHD103-00R - Hall Effect Sensor. NPN, latching.

    $0.49

    IN STOCK - MORE THAN 1,000 READY TO SHIP!

    Hall Effect Sensor, NPN, open-collector output, latching. Operates on 4.5 - 24VDC, Output max 20mA DC. Contains a linear amp and Schmitt trigger to provide sharp latched "on" state transition when a North magnetic pole aligns with the front face (on). The latch is reset (off) in one of two ways; by aligning a South magnetic pole with the front face or temporarily removing the bias voltage supply.(off). The back face has a 45-degree bevel. Facing the leads. with the bevel down, the three leads are numbered 1-2-3 from left to right. Positive (+) supply connects to pin 1, negative (-) common to pin 2 and the output to pin 3. The output completes a switch to common when it is "on." Learn More

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Back to top