Motors

REGAL CCL Motor- DE-25L-0001 - KP63MT014 Motors, AC/DC.

Universal 120V, High Speed (11,000 RPM).

Brush Type Motor

Motor Diameter 1.41" (35.8mm)

Overall Assembly Length 3.70" ((94mm)

Motor Body Length minus shaft 2.788" (70.8mm)

Face Mount 2 Tapped Holes approximately 0.97" Apart 

Removeable Spiral Worm Gear

Works at 12V+ Approximately 150RPM after Gear Reduction 

Spiral Gear Assembly has two Cams 

The Front Bushing support supports and centers the Shaft.

Note: Pull Cam Pin, remove Bridge Rectifier and use as DC Motor 15 VDC 150RPM 

Regal P/N KP63MT014

12V 200mA AC with Bridge Rectifier (SB603) or DC Reversible.

Electroswitch - OAK INDUSTRIES - LCE1N-2G09-36-3 Encoder, Rotary, 700 Series.

Electroswitch Electronic Products acquired OakGrigsby. 

Manual 2 Bit, 9-cycle, 36-Position with detents.

Gray code.

Housing material: Plastic, Gray.

Operating Temperature: -40C to 85C

Mount: Panel, Threaded-bushing.

Rotatiopn Life: 50,000 Cycles.

Max Operting Speed: 30 RPM

Dimensions: 0.890" (22.6mm) long x 0.830" (21.0 mm) wide plus 3 PC leads x 0.336" (8.5mm) high. Bushing length: (3/3-32), 6.3mm long. Shaft: 0.250" (6.35mm) D x 0.500" (12.7mm) long.

Note: Marked OAK 700. (0.830" x 0.343").700 encoder

Additional Information: https://www.electro-nc.com/oak/p0710.pdf

JOHNSON - 1342284 - HF213LG PM Motor.

The Johnson Electric DC motor series is the industry benchmark for micro motor driven actuation.

HF Series for industrial appliccations

DC 9-15V Reversible.

Draws about 100mA, No Load.

The EMI filter is completely insulated.

Unloaded Speed: 9VDC 750RPM - 12VDC 1250 RPM - 15VDC 2000RPM.

Dimensions: 18mm x 23.3mm x 51mmL (including shaft 7.5mm length / 1.9mm dia.)

Note: High Quality designed for IBM Machines

Weight: 9 oz.

AIRPAX - 82227/B82359 - Motor, Stepper. 12VDC 2 Phase 37 ohm.

Motors, Stepper.

Simple 2-phase, 12VDC 48 Step/Rev 7.5deg/step, 37 Ohm Bipolar Windings.

Dimensions: 35mm, 1.38" D. Attached: 4 Wire Bipolar, 16 inches long.

Mounts 1.7" 42mm hole spacing, includes a 15-tooth 1/4" Diameter Nylon Gear.

Running Rate to 1800 step/sec.

Weight: 2.6 oz.

New Old Stock

Proudly Made in USA

Panasonic MATSUSHITA - 55SI-25D AWC Motor, Stepper.

12V 36 Ohm 7.5 Deg 6 Wire.

Dimensions: 2.042" (51.8mm) D body, overall with mount 3.138" (79.7mm) long.

Heatsink is 2.955" (75.0mm) wide x 1.027" (26.00mm) high.

Shaft 1/4" half flat x 0.750" (19.0mm) long.

With attached 6 position female header connector.

Silicon Grease is between the motor the heatsink.

Weight 11 oz.

Note: Arduino driven using low cost driver IC ULN2003 transitor array also in our stock.

For More Detals Rreference: https://arduinodiy.wordpress.com/tag/stepper-motor/

Manufactured by Matsushita for Coleco Adam.

Made in Japan

30701 High torque DC motor. 

This compact DC Motor would be great for a variety of projects and experimental uses. It requires only 1VDC to operate and provides optimum performance at 3VDC.  

1-3VDC, 15,500-RPM, approximately 1 Amp.

Dual shaft 2.3mm 15mm long.

Reversible PM.

Dimensions: 27.5mm/1.08" OD x 1.47" long excluding shafts.

Relatively high torque.

SERVO - 77454 1063-1 Motors, AC.

Input Power: 115/200VAC 60HZ

Spped: 1300RPM

Power: 12 watt.

Torque: 1.1 Oz In.

Splined shaft.

Capacitor 0.8uF required, not included.

FUJI ELECTRIC - SM35-2006B Motor, stepper.

Supply: 13VDC.

Coil Resistance: 38 ohm.

Direction: Reversible.

Wire Count: 4-Wire.

Mech. Mtg: Slotted Flange with two slots 42mm spacing

Body Dimensions: 35mm dia x 21mm deep.

Shaft: 1.9mmD 7.5mmL.

Note: Fuji Electrochemical Co - Japan.

Johnson Electric - 2706 - DC Motor controller PCB with Three 10 Farad Super-Capacitors & Three Switches.

Johnson Electric is the industry benchmark for micro motor driven actuation. PCB provides steady current source for small motors have uneven loading characteristics. 

PCB Measures 1.280" X 1.630" 

Power Input: 7.2 VDC on Two Gold PCB Terminal Studs

Power Output: Two 1/8" (0.125") Quick Connect Connectors

PCB is a Super-Capacitive Drive Assembly.

7.2VDC input power paralleled with 3 series connected Super-Caps (10F @ 2.5VDC each) to total 3.3 F of capacitance @ 7.5VDC).

Each of the three Super Capacitors manufactured by Maxwell (PC10-270 Series) is rated 10 Farad 2.5VDC. Supercapacitors are used for energy storage undergoing frequent charge and discharge cycles at high current and short duration or applications that require pulse power.

There are also three switches: One SPDT (On/Off Toggle) and Two SPST KW12-2 Microswitches rated 3A@250 VAC & 5A@125VAC.

High brightness LED illuminates when energized.

Note: With the PCB charged to 7VDC, the LED will remain brightly illuminated for greater than 10 minutes.

Motor Assembly removed from "New" from Never Used Battery operated commercial Cutting Tool. 

Applications: Student & Science Projects. Great for disassembly and use of Capacitors, Switches and Super Bright LED.

Note: See SKU 156919 for purchase of the Superior PCB Assembly with Motor.  

Motor brush. Our VS-2 is steel enclosed with an internal botton spring. Base: flange 0.618" (15.7mm) long x 0.277" (9.5mm) wide. Housing height: overall 0.534" (13.5mm). Carbon element is extended out of top 3.2mm high x 6.2mm long x 2.2mm thick. Note: Manufacture logo is a diamond with GS in the center.

MATSUSHITA - MHT-5AG Motor, DC.

4.5VDC - 6.5VDC.

Good hobby motor -Formerly used in Tape Deck Console and elsewhere.

Made in Japan

MABUCHI - FM13 (2280) RTMC-125-19316 - Hobby Motor

FM13 Miniture Flat Frame Motor, DC.

Reversible, Can be used in either direction by reversing polarity

3 Pole Permanent Magnet.

1.5-3VDC, model 2280 winding

Motor Performance at 1.5 VDC is no load speed 8000 RPM

No Load current 450mA

Stall Current is 1900 mA.

Dimensions (not including shaft) 24mm Long, x 20mm Wide x 15mm.

Matewrials: Metal & Plastic

Shaft: Diameter 2mm by 6.5 mm.

Weight 17 grams (9.6 Oz).

Used in Race Track Slot Cars, Electric Shaver/Razor, Hobby Toys & Instruments. 

New Old Stock

Made in Japan

HITACHI - HA13406W - IC - Three-Phase Brushless Motor Driver.

Output Current: 3 Amp @ 12V Per Phase

Low Output Saturation Voltage

Over temperature Protection

Low Thermal Resistance Package

Includes Hall Effect Sensor Amps, Logic, Output Amps and Control Amps.

Can be used with many motors using hall effect sensors for speed control.

Case: SP-23TA

Power SIP Right Angle Leads.

Genuine Vintage Hitachi - New Old Stock

Made in Japan

JAPAN SERVO CO. - 6813744 TYPE KS6P8-11 Motors, AC.

25VAC 50/60Hz 250/300RPM.

Complete with 20uF capacitor.

Aerovox - W45B1312E01 Capacitor, Metalized Film Polypropylene. 

Aerovox is a leading manufacturer of capacitors for industrial, medical and specialized applications, with world-class design, manufacturing and testing facilities. Aerovox capacitors are among the world’s most reliable components. W Type or Wrap & Fill is a tape wrapped axial leaded dry capacitor designed for use in a variety of permanent split-phase capacitor motor applications widely used in ventilating fans, appliances and refrigeration. The AC capacitors provide starting direction by shifting the current in the windings so that the motor simulates the operation of a two-phase motor.

Capacitance: 12uF

Tolerance: 20%

Voltage 130VAC 60Hz.

Dielectric: Metallized Film Polypropylene

Non-inductive Wound Metalized Polypropylene.

Metalized Film Polypropylene Capacitors have self-healing properties.

Package: Axial Leaded Film Capacitor - Through Hole

Dimensions: 1.0" Diameter x 2.7" Long.

Operating Temperature: 90 Deg C.

Non-Polarized. 

Application: Also a perfect choice for high-end crossover speakers and power tool chargers.