Motors

JOHNSON ELECTRIC - C4557-60003 - HC615LG - 65701

Johnson Electric is a World Leader in Micro Motors, Reversible PM 6-18VDC Motor, 100mA, 3500 RPM no load.

Torque Constant: 49.4 m/Nm/Amp. Dy.

Resistance: 6.84 ohms.

Motor Regulation: 28 RPM/m-NmTorque: 126m-Nm 2.63Amp at stall.

Maximum Efficiency: 68%. Torque: 20m-Nm, Speed: 2944RPM, Current: 0.51Amp, Output: 6.17 watts.

Maximum Power: Torque: 62m-Nm,

Speed: 1753RPM, Current 1.37A.

Output: 11.47 Watt.

Shaft Length: 11mm 0.435"

Shaft Diameter: 3.1mm 0.125".

Maximum Efficiency: 63 - 81%

Mounting: Face, Two Threaded Holes Approximately 25mm Apart

Has an attached pulley: 10mm 0.39" inside Diameter x 4.6mm 0.18" inside Length.

Motor: 38mm 1.495" Diameter x 83mm 3.27" Length Overall.

Rotation: Clockwise when viewed from shaft output end with positive applied to positive.

Weight: 8 oz.

Can also be used as a Generator and operated in either direction.

Two threaded (M3 x 0.5) mounting holes on a 25 mm diameter.

Note: Permanent magnet design allows use as generator.  

Applications: Used in numerous HP Printer/Copiers (Carriage Drive Motor) including HP deskjet 812c c6411e, HP Deskjet 840c Printer, HP Deskjet 840c Printer, HP color copier 170, HP color copier 270, HP color copier 160, HP color copier 260, HP officejet g series, HP officejet g95 all-in-one printer, HP color copier 190, HP DeskJet 720C Printer, HP DeskJet 722C Printer, HP deskjet 710c printer, HP deskjet 880c printer, HP DeskJet 895Cxi Printer, HP DeskJet 895Cse Printer, HP DeskJet 810C Printer, HP DeskJet 812C Printer, HP DeskJet 815C Printer, HP DeskJet 830C Printer, HP DeskJet 832C Printer, HP DeskJet 840C Printer, HP DeskJet 843C Printer, HP DeskJet 843Cxe Printer, HP DeskJet 930C Printer, HP DeskJet 950C Printer, HP DeskJet 952C Printer, HP deskjet 970cxi printer, HP deskjet 970cse printer, HP DeskJet 955C Printer, HP officejet t45 all-in-one printer, HP officejet t45xi all-in-one printer, HP officejet t65 all-in-one printer, HP officejet t65xi all-in-one printer, HP officejet r40 all-in-one printer, HP C6683A multifunctional printer, HP C6684A multifunctional printer, HP C6687A multifunctional printer, HP officejet r40 bulk unit, HP C6689A multifunctional printer, HP officejet r45 all-in-one printer, HP officejet r65 all-in-one printer, HP officejet g55 all-in-one printer, HP officejet g85 all-in-one printer, HP officejet g55xi all-in-one printer, HP officejet g85xi all-in-one printer, HP officejet g95 all-in-one printer, HP Color Copier 290 printer, HP officejet k60 all-in-one printer, HP OfficeJet K60xi Print/Fax/Copy/Scan, HP officejet k80 all-in-one printer, HP officejet k80xi all-in-one printer, HP psc 500/500xi all-in-one printer, HP psc 500/500xi all-in-one printer, HP DeskJet 841C Printer, HP deskjet 6620 color inkjet printer, HP DeskJet 6620 Color InkJet Printer, HP DeskJet 6623 Color InkJet Printer, HP DeskJet 6628 Color InkJet Printer, HP DeskJet 6620XI Color InkJet Printer -  (Also compatible with other models and brands).

MERKLE-KORFF - EYQM-63264-15-2 Motor, PM.

Ratings: 12VDC reversible, 8400 RPM no load.

Works on 2V and above 1.2"OD x 2.75" with magnetic tachometer 5500rpm under a light load.

Tc: 1.6 oz-in.

Ts: 7 oz-in.

Kt:1.94 oz-in/A

Po 7.7W Rt:4.65-OHM.

Motors are marked S0878B.

Weight: 5 oz.

Note: Some may have a 7.7mm brass gear with 8 teeth.

Made in USA

Industrial Cutler-Hammer / Eaton - 8130K20J15V51, DPDT On/Off/On, Center-Off, Motor Reversing Toggle Switch (Already Cross Strapped) Permits usage for Polarity Reversing Motor. Alternate 8951159

White Rocker Identified FWD & REV, 6A-125VAC, 3Amp 250VAC, 2A-277VAC

Six (6) 1/4" Quick Connect Male Tabs, Dimension: 1.45" wide x 1.33" x 1.16"

Panel Mount Fits standard .83 x 1.48 Inch Rectangular opening. Switch secured by included snap-on bezel. 

Very handy item to have around the shop if you are DYI type. Used for all sorts of DC motor reversing applications such as camper trailer jacks, winch controls for in/out operation, door open closed, liftgate up/down, boat navigation and anchor or Automotive Motor Control.

This switch can be used when you want to feed (2) loads from 1 or 2 sources. This switch may also be used as a SPDT switch by simply not using 3 of the terminals.

Made with Pride in USA

Buehler - 1.13.043.218-9 - 3140-0858 - Motor, DC PM.

19.1 VDC but operates with DC Supply Ranging From 3 to 24VDC.

Connections: 23 inch Long Twisted Pair Leads.

Body Dimensions: 1.58"D x 4.16"Long overall.

Shaft Dimensions: 3.9mm shaft and attached pulley 0.32"ID. 

Reversable High-efficiency Motor.

50-100mA.

1.13.043.218-9 - 3140-0858.

Made in Germany

Airpax Sensata - A82454-M3 - Motor, Unipolar Stepper - 5VDC 1.125 Deg/Step 0-400RPM 0-320P/Sec.

The stepper motor is a device used to convert electrical pulses into discrete mechanical rotational movements.

Supply: 5VDC.

Speed: 0-400 RPM.

Winding Resistance: 15 Ohm.

Steps: 1.125 Deg/Step. 3.5Watt,

Wire Count: 6 Leads.

Mech. Mtg: Two (2) Mounting Holes 2.38"apart.

Body Dimensions: 2.12" x 2.75" x 1.4" with gear attached to 1/8" shaft.

Weight: 7 oz.

Note: 0-320P/Sec, 3.5 watt.

Rotation: Reversible.

Made in USA

New Old Stock 

Mopar - Chrysler Dodge Plymouth  -  Heater  - Blower Motor Switch, Rocker, Automotive.

Actuator: 4 Position (Off is Open, LO=C TO L, MED= C TO M, HI=C TO M + HI).

Connection: (4 Terminal) Male Quick Connect terminals.

Body: Overall 1.316" long x 1.448" wide x 1" behind panel.

Actuator extends to 1.571" above assembly.

Note: Blower Motor Switch.

Mounted on a plate 1.316" long x 1.448" wide.

Vintage - Genuine Chrsyler Dodge Plymouth - Factory New Old Stock

Similar to 3502681 (1970's Vintage)

Alternate Appplications - Hobbyist Motor/Fan Control

Sensata Industries - AIRPAX - L82101-P2 Motor, Stepper.

12V 118 Ohm

15 deg/step.

6 wires.

Mounting: 1-3/8" hole spacing.

Body: 1"D (25.5mm) x 1/2" (12.6mm) deep, with 35mm mount centers.

Shaft: 1.7mm D x 8.7mm L.

Weight: 1 oz.

New Old Stock

Proudly Made in USA

Sensata - KLIXON - MRA4977 Thermostat, Thermal Cut-out.

Often used to prevent motor or compressor overload.

Snap–action Klixon disc

Longer off–times for better matching and compatibility with PTCR starters

Better repeatability of trip–time and ultimate–trip

Minimum temperature drift versus life cycles

Excellent resistance to physical and thermal shock

Alternate: OV44

Made in USA

BJT595 Carbon Graphite Motor/Generator, Electrical Brush.

Tamped Connections In Four Spots

Split Brush

Heavy Duty Brass Brush Clip

Heavy Duty Copper Shunt

Brush Dimensions: 1.8" Long X 1.30" Wide X 0.55" Thick

Shunt Leads approximately 4" Long

Warner Electric - Altra -5300-101-008 Hardware kit.

Mounting Accessory for Clutch or Brake - PB, PCBC, SFPBC Series, Compatible Model / Part Number PB-500 (Heavy Duty), PB-500 (Normal Duty), PCBC-500 (Heavy Duty), PCBC-500 (Normal Duty), SFPBC-500 (Heavy Duty), SFPBC-500 (Normal Duty)

Mounting accessories 500 OM for the PB-600 Normal Duty Magmetic Brake.

More info: https://www.warnerelectric.com/products/brake-products

Barber Coleman - FYQM63200-25 Motor, DC.

Supply: 12V. N/P

Current: 150mA.

Speed: 1200.

Sleeve Bearings

Body Dimensions: 1.25" D x 2" long.

Mounting: Face mount with 2 tapped holes

Made in USA

Note: Reversible (PM) Permanent magnet.

GOULD INSTRUMENTS - CL-212103 - Gordos 9203700 - Puse Width Modulation Amplifier Module.

Note: Amplifier Module without Gould Heat Sink is Gordos P/N 9203700

Hybrid MOSFET Switching Module for Medium Sized Pulse-Width Modulated Amplifiers.

H-Bridge Output Stage- PWM and ENABLE inputs.

Minimum Load Resistance: 10 ohms.

Power Requirements: +/-15 VDC at 3 Amperes.

Physically Polarized 7-pin Encapsulated Package with Integral Black Anodized Heat Sink.

1.4" by 2" by 0.5" with PCB-style mounting pins.

Note: Power Unit with Gould Instruments Heat Sink bonded to unit.

Overall Dimensions: 2" x 1.4" x 0.4" Above Board

Gordos 9203700 Amplifer contains Eight IRFD1Z3 N-Channel Power Field Effect Transistors. 

Internal Module Schematic in Attached pictures.

New Old Stock - Made in USA

Auxiliary Contact Block