Temperature Sensor

Thermtrol/Klixon - 7AM Series Thermal Switch - 7AM205A5-823 - 90C Switch, Thermal. NC Cut-Out.

Klixon 7AM thermal protectors prevent overheating in a variety of consumer, industrial and commercial products. It is a miniature, snap-acting, thermally operated device that is a proven performer in protection technology. 

Thermitrol or Klixon (Devision of Sensata) 7AM Series Snap Action Thermal Switch. 7AM205A5-823 Normally Closed contact opens at 90 Deg C. (194F) Mount: PCB, 2 pin, Radial Leads w/1/4" nickel leads. For overcurrent and overcharge protection.

Dimensions: 43" wide x 0.80" Long (0.952 high including leads) x 0.2" deep. Current Ratings 16 VDC @20 Amps, 115VAC @ 22Amps, 277VAC @ 8 Amps, 600VAC @4 Amps. Good for several amps and 120 Volts.

In order to achieve optimum heat transfer from the protected medium or ambient to the thermostat, the 7AM has been designed with the case connected to the bimetallic disc. This feature makes it necessary to electrically insulate the 7AM from the mounting surface. 

Applications: Battery Packs, Battery chargers, Permanent Split capcitor motors, Shaded Pole Motors, HID ballasts, Florescent lighting ballasts/transformers, Vacuum cleaners, Recessed lighting fixtures, Automotive accessory motors/solenoids ect.. - PC boards.

More information: 

UL/CUL Approved

Learn More

ANZEN DENGU CO. LTD - V086  Fuse, Thermal Cutt-off.

Voltage: 250VAC 2Amp / 50VDC 4Amp.

Rated functioning temperature: 174-181F,  81+/-2 deg C and below.

Temperature cutoff: 86C / 187F.

TM: Max temp at which no reconduction will be caused for ten minutes: 95C.

Dimensions: <3mm D x 9mm long with 2 long leads, 68mm wire leads.

Trademark: TAM UL CSA VDE BEAB.

Package of 10.

Applications: Electric home appliances, electric industrial equipments, office automation equipments, plain paper copiers, transformers, motors, etc.

Learn More

QUALITY THERMISTOR INC - QTLC-14C3 - Thermistor. NTC.

Status: Discontinued

Resistance: 10,000 Ohms at 25 Deg C.

Curve tracking: 0.2C (0 C - 70 C).

Material: Epoxy Bead.

Bead diameter: 0.095"

Package: radial 3" long, #32 Awg. (.0075") bare leads.

RoHS Compliant.

Learn More

Thermistor. Bi-Metal. Contacts: NO. Series 2450. Learn More

Thermistor. 2K Ohm. Glass Encapsulated 0.043". Specification sheet "A". Learn More

National Semiconductor Corp - LM34CZ - Sensor, Precision Temperature.

The LM34 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Fahrenheit temperature. The LM34 thus has an advantage over linear temperature sensors calibrated in degrees Kelvin, as the user is not required to subtract a large constant voltage from its output to obtain convenient Fahrenheit scaling. The LM34 does not require any external calibration or trimming to provide typical accuracies of ±1⁄2˚F at room temperature and ±11⁄2˚F over a full −40 to +300˚F temperature range.

Calibrated directly in degrees fahrenheit.

Linear +10.0mV/degF scale factor.

1.0F accuracy guaranteed (at +77F).

Range: -40 to +300F.

Suitable for remote applications.

Package: TO-92 Plastic.

Learn More

Thermistor. PTC. Package: uncoated disc, radial leads. Dimensions: 14.5mm D x 1.8mm thick. Thermistors are thermally sensitive resistors and have, according to type, a negative (NTC), or positive (PTC) resistance/temperature coefficient. Thermometrics product portfolio comprises a wide range of both types. Learn More