Heat Sinks
- Unidentified MFG - 202-297 - Hardware, Heatsink, For TO-220. Package of 10.IN STOCK - MORE THAN 500 READY TO SHIP!
202-297 - Hardware, Heatsink For TO-220 Components, Package of 10.
10 Fin.
Material: Aluminum, Black Anodized.
Vertical Mount.
Fin Style: Radial
Thermal Resistance: 7.5°C/W
Fin Style, Extruded Radial
Dimensions: 1.18" x 1"wide x 0.5" high.
Pre-drilled for devise with one 0.15" / 3.8mm hole, bottom is flat, no tabs or nubs.
Package of 10.
Alternate: HSS-B20-NPS-01, Aavid Thermalloy 507302B00000G, 01M6666
Learn More - Aavid Thermalloy - 2228B - NSN 5999-00-873-3812 - Hardware, Heatsink. For TO-39 or TO-5 components.IN STOCK - MORE THAN 100 READY TO SHIP!
Aavid Thermalloy - 2228B - NSN 5999-00-873-3812 - TO-39 / TO-5 Heatsink.
Low cost, easily installed, push-on heat sink. This device may be installed after assembly and takes up little additional board space.
Passive heat sink with 3 cooling fins for increased thermal performance
For TO-39 or TO-5 components.
Thermal Resistance: 40 C/W - 3.0 Watt
Material: Black Anodized Aluminum.
Nominal Dimensions: 0.75" D x 0.4" high. (22.23mm x 13.49mm)
RoHS Compliant
NSN 5999-00-873-3812
Material Document and Classification: QQ-A-225/6 fed spec single material response
Surface Treatment Document and Classification MIL-A-8625, type 2, class 2 mil spec single treatment response.
Alternates: 078907-0001, 1205-0213, 1205-0213, 166267-1, 352-9619-110, 3522 500 23261, 505413, 802099-003, G03920
Replacement for NTE401
Similar to 322805B0000
New Old Stock
Learn More - Thermalloy/Aavid - 507222B00000 - Hardware, Heatsink. Dual TO-220.IN STOCK - MORE THAN 500 READY TO SHIP!
Thermalloy/Aavid - 507222B00000 - Hardware, heatsink.
For two TO-220 Components.
Dewscription: 12 Fin.
Material: Black Anodized Aluminum.
Dimensions: 1.47 x 1.75" x 0.38" tall (37.4mmL x 44.5mmW x 9.7mm).
Vertical or horizontal Mount.
Thermal Resistance: 9.6 C / W.
Power dissipation 8W @ 70 Degree C.
Rohs Compliant.
More info: www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=507222b00000g
Rohs Compliant
Cross Reference: 6072B, Digi-Key HS114-ND
- Thermalloy Aavid - THM6054B-SE1 - 6054B - Hardware Heatsink for TO-3 Transistors and other Components.Special Price $1.98 Regular Price $3.00
Thermalloy Aavid - THM6054B-SE1 - 6054B - Hardware Heatsink for TO-3 Transistors and other Components.
Black, Anodized aluminum.
Dimensions: 45.8mm (1.806") square x 32.2mm (1.271") tall
20-fins, 5 each side. ID 1.67" and has (2) 6/32 threaded rivets on bottom.
Learn More - Thermalloy/Aavid - 531202B02500 - Hardware, heatsink. For TO-220 or TO-202.Out of stock
Thermalloy/Aavid - 531202B02500 Hardware, Heatsink.
Heat Sinks Extruded Heat Sink, Notch Base, TO202, Radial Fin, Vertical, 7.5C/W, 2.67mm Hole
TO-202 Package 7.00 C/W Thermal Resistance Heat Sink with Radial Fins
For TO-220 Components.
Natural convectiopn Thermal resistance: 7.5
Black Anodized.
Vertical Mount.
Dimensions: 2" tall, 0.5" thick x 1.4" wide.
Two 2.5mm pins 1" apart. Other Aavid P/N is 6100B.
- Unidentified MFG - PT-584 - Hardware, Heatsink. TO-220.
Unidentified MFG - PT-584 - TO-220
Bolt-On Mountable
Black Anodized Aluminum Heatsink
Dimensions: Overall 1.635" wide + 1"deep + 0.710" off board.
Alternates / Similar: ATS-PCBT1094, PSC2T2CB, PSC22CB, 574502B03200G, 574502B00000G, HSS-B20-NP-02, HSS-B20-074H
Learn More - Unidentified MFG - PT-406 - Hardware, Heatsink. With Two SH323KC Voltage Regulators.READY TO SHIP - ONLY 80 LEFT IN STOCK!
Hardware, Heatsink.
Status: Discontinued
Assembly consists of With (2) attached Hybrid Voltage Regulators, SH323KC TO-3 Steel, 2 Bridge Rectifiers, TO-3 Sockets, TO-3 Insulator Caps, Large Heat Sink.
Positive 5V 3Amp 50Watt.
Overload Protected
Internal Short Circuit Protection
Material: Nice Black Anodized Aluminum
Heat Sink Dimensions: 6-1/2" x 3-3/4".
Used/Removed from New Old Stock Chromascan Equipment.
Alternates: NTE931, LM323K, SK9067, SG323
Applications: Great parts for Regulator Projects
Learn More - AAVID Thermalloy - 5925 - TO-220 Heat Sink, Twisted Fin Aluminum.IN STOCK - MORE THAN 100 READY TO SHIP!
AAVID Thermalloy - 5925 - TO-220 Heat Sink - Series 5925
PCB mount for TO-220 Single Gauge devices, Transistors/SCrs, Etc...
Mounting Style: Through Hole
Heatsink Material: Aluminum Anodized
Fin Style: Twisted Fin
Natural Thermal Resistance: 22 C/W
Thermal Resistance @ Forced Air Flow (100 LFM): 10 °C/WDimensions: L 6.35 mm, Width: 22.2 mm, H: 31.75 mm
Color: Black
Alternates: 042005, 592502B03400G
Unit Weight: 0.098767 oz
Learn More - Unidentified MFG - 5-246 - Hardware, heatsink. For TO-3 components.Special Price $4.98 Regular Price $8.95Out of stockHardware, heatsink. For TO-3 components. Black. 8 Fin. Dimensions: 4-1/16" long x 3" wide x 1" high, rectangular. Learn More
- Thermalloy/Aavid - 534202B03453 - Heatsink. For TO-220, TO-218 or TO-247.READY TO SHIP - ONLY 51 LEFT IN STOCK!
Thermalloy/Aavid - 534202B03453 Heatsink.
For TO-220, TO-218 or TO-247 components.
Mounting Style: Through Hole
Heat Sink Matewrial: Aluminum
Color: Black
More info: http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=534202b03453g
Learn More - Thermalloy/Aavid - THM 13103 - 13103 - Hardware, TO-10 / TO-32 Heatsink. Hardware Kit.
Thermalloy/Aavid - THM 13103 - 13103 - Hardware, Heatsink.
Status: Discontinued
Hardware Kit.
Material: Anodized Aluminum.
Component Retention Screw has 3/8-32 Thread
Block has two Threaded Mounting Holes 4/40
Overall Block Dimensions: 0.631" X 0.500" X 0.250" (16mm X 12.70mm X 6.36mm)
Retention Screw Dimensions : 0.375" Diameter X 0.250" Height
Screw-Down Threaded Fastening.
For TO-18/TO-72 Heatsinks.
Note: TO-18 /YTO-32 Component sits in Heat Sink Block and the Screw secures the Flange and heat Sinks the component.
Machined Military Heat Sink
Alternate Reference: 276-017-0005 Revision E.
Made in USA - New Old Stock - Difficult Component to Find
Learn More - Thermalloy Aavid - THM6054 - 505403B00000G - Hardware, Heatsink for TO-3 Transistors and other components.IN STOCK - MORE THAN 500 READY TO SHIP!
Thermalloy Aavid - THM6054 - 505403B00000G - Hardware, Heatsink for TO-3 Transistors and other components.
Material: Black Anodized Aluminum, Thin.
With five 1" Fins per side.
Thermal Resistance: 6.00
Square Basket Heat Sink featuring Straight Fins
Dimensions: 1.78" square x 1.25" high. (45.21mm X 31.75mm)
Mount centers: 1-3/16".
New Old Stock
Learn More - CTS IERC - UPI-TO3B - Hardware, Heatsink for TO-3 Devices.Special Price $1.98 Regular Price $3.00Out of stock
CTS IERC - UPI-TO3B - Hardware, Heatsink for TO-3 Devices.
UP1 Series for TO-3 Outline and Stud Mount Devices.
Natural Conv. (°C/W): 10.4
Forced Air (°C/W): 3.2
Black Anodized Aluminum.
Dimensions: 1.78" square x 0.50" high, with 5-staggared fins each of four sides.
Vintage - New Old Stock
Learn More - CONCORD - 12-14255-05 - Hardware, Heatsink. For Two TO-3.Special Price $5.98 Regular Price $9.00Out of stock
CONCORD - 12-14255-04 Hardware, Heatsink.
Aluminum Extrusion with Ten Cooling Fins
Heatsink with fasteners for Two - TO-3 Device (Transistor, Diodes, Voltage Regulators, SCRs, LEDs, etc.)
Dimensions: 3.306" long x 1.758" wide x 1.810" high.
Mount centers: 2.962".
Marked THM 12-14255-05.
Heavy Duty
9
Learn More - Wakefield Engineering - 690-3B - Hardware, Heatsink. For TO-3 and TO-66 Components.
Wakefield Engineering - 690-3B - Hardware, Heatsink.
These low-cost heat sinks provide the most power dissipation at the lowest unit cost and are
available in three standard types to mount and cool one TO-3 or TO-66 metal power semiconductor type or two plastic package TO-220 power semiconductor types.For TO-3 & TO-66 Components.
Material: Aluminum.
Color: Black Aanodized.
Mount: SMD.
Dimensions: 1.839" wide x 1.852" deep x 1.310" high.
Alternate: Mouser 567-690-3B
Learn More - Thermalloy Aavid - THM6073 - 507302B00000G - Hardware, Heatsink. TO-220.Special Price $0.25 Regular Price $0.29READY TO SHIP - ONLY 74 LEFT IN STOCK!
Thermalloy Aavid - THM6073 - 507302B00000G - Hardware, Heatsink
Economy, narrow base, low profile channel style heat sink is perfect for use on printed circuit boards with 0.500 inch centering. When mounted horizontally, the total height of the heat sink is just 0.380
Heatsinks for TO-220 black 3/4" x 3/4" and 7/8" deep (19X19X9MM)
TO-220 & SCR mounting
Additional Information http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=507302j00000g
Learn More - Thermalloy/Aavid - 529802B02500 - Heatsink. For one TO-220 component.Special Price $1.49 Regular Price $2.00Out of stock
Thermalloy/Aavid - 529802B02500 Heatsink.
Extruded 5290 is a series of dual radial board level heat sinks designed to cool TO‐218, TO‐220, and TO‐247 devices.
Status: Discontinued
For one TO-220 type component.
Material: Aluminum, Black Anodized.
Mount: bolt on or PCB vertical with pins.
Dimensions: 41.91mm x 25.40mm x 38.1mm (1.5") high.
Power Dissipation @ Temperature Rise10W @ 50C.
Thermal Resistance @ Forced Air Flow 3.0C/W @ 200 LFM.
Thermal Resistance @ Natural 3.7C/W.
Learn More - Thermalloy/Aavid - 7139D - Heatsink. TO-220.$1.69Heatsink. For TO-220 components. Mounting clip. Fin type: channel. Material: Tin plate, copper. hermal Resistance: 28.3 C / W. Dimensions: 13.08mm long x 13.21mm wide x 19.81mm high. Learn More
- Thermalloy Aavid - 6015B - Hardware, Heatsink for TO-3 Transistors and other devices.Special Price $1.98 Regular Price $3.00
Thermalloy Aavid - 6015B - Hardware, Heatsink for TO-3 Transistors and other devices.
4 Fins each side of a diamond shape.
Material: Black Anodized Aluminum.
Dimensions: 47.5mm long x 35.8mm wide x 25.2mm high.
New Old Stock
Learn More - Thermalloy/Aavid - 577102B00000 - 577102B00000GHeatsink. For TO-220. Package of 10.$3.98 As low as $3.29
Thermalloy/Aavid - 577102B00000 - Heatsink.
For TO-220 components.
Material: Anodized Aluminum.
Dimensions: 0.752" (19.1mm) high x 0.520" (13.2mm) wide x 0.390" (9.9mm) deep. 5 Fin each side.
Color: Black.
Package of 10.
Learn More - Thermalloy/Aavid - 577002B00000 - Hardware, heatsink. For TO-220 components.$0.25Hardware, heatsink. For TO-220 components. Material: anodized aluminum. Mount: vertical. Dimensions: 0.75 x 0.25". More info: http://www.aavid.com/products/standard/577002b00000g Learn More
- Thermalloy/Aavid - 530714B00000 - Heatsink. For TO-220 components.$0.50READY TO SHIP - ONLY 20 LEFT IN STOCK!
Heatsink. For TO-220 components. Material: anodized aluminum. Dimensions: 0.714" high x 1.00" wide x 0.50" deep. 3 Fins each side. Color: black. Note: Alt P/N: 6107B-14.
Learn More - Thermalloy/Aavid - 530714B00000 - Hardware, heatsink. For TO-220 components.$0.25Out of stockHardware, heatsink. For TO-220 components. 3 Fins each side. Material: anodized aluminum. Mount: horizontal. Dimensions: 25.4mm long x 18.2mm deep x 12.7mm high. ID is 22.9mm long x 18.0mm deep x 11.6mm high. Note: Alt P/N: 6107B-14. More info: http://www.aavid.com/products/standard/530714b00000g Learn More
- Thermalloy/Aavid - 2225B - 322505B00000G- Hardware, Heatsink. For TO-39 or TO-5 .IN STOCK - MORE THAN 500 READY TO SHIP!
Thermalloy/Aavid - 2225B - 322505B00000G - Hardware, Heatsink.
Case/Package: TO-39 or TO-5
Material: Black Anodized Aluminium, Anodized
Mount: Press Fit - 2 Fin
Shape Fins, Rectangular: Technical
Natural Thermal Resistance: 35 °C/W
Thermal Resistance: 56 C/W
Thermal Resistance @ Forced Air Flow (100 LFM): 20 °C/W
Dimensions: Diameter - 8.0264 mm, Height-12.7 mm,
Height Off-Base-10.16 mm, Length- 19.05 mm, Width- 19.05 mm
Dimensions: 0.755" D x 0.398" high.
Alternate:322505B00000G, AAV322505B00000G.
Learn More