Other Hardware

Mill-Max - 3620-2-32-15-00-00-08-0 - Circuit Board Hardware - Terminal Pin, PCB 10u AU OVER NI, Package of 10.

Product Category: Circuit Board Hardware - PCB

Product: Pins    

Type: Terminal Pin, Edge Mount

Length: 0.356 in             

Material: Brass Alloy, Gold Plated           

Brand:  Mill-Max            

Packaging: Bulk

Plating: Gold over Nickel            

RoHS:  Details

Package of 10.

 

Learn More

Unidentified MFG - 43370 - Hardware, Washer. 1" OD.

Rubber washer with 0.25" hole x 0.058" thick.

Material: Rubber.

Note: Feels like silicone rubber.

New Old Stock.

Applications: Electrical or Vibration Isolation / Suppression

Package of 25.

Learn More

Rolling Ball Tilt Switch. Direction indicating Switch, TO-39-4 style case. Gold plated leads, and internal contact ball Highly Sensitive to detect basic motion/orientation. Environmentally safe, non-mercury electronic switch. Sealed type available for heavy humidity environment, free from bad connection or problems caused by contact oxidization. Poor man's accelerometer. The TO-39 package is a family of metallic can package used for hermetically sealing devices. The metal case can be gold coated. An internal gold-plated ball inside the sealed case touches one of 4 leads when tilted about 25-degrees or more. Since the leads are 90-deg apart you can sense which direction the device is leaning or tie the 4 together and any shaking or movement off level will cause contact closure. Has four leads on the bottom and one on top. Rolling Ball Tilt sensors allow you to detect orientation or inclination. They are small, inexpensive, low-power and easy-to-use. If used properly, they will not wear out (100,000 Cycle life). Their simplicity makes them popular for projects, toys, gadgets and appliances. Typical Applications - Alarms, Safety, Security, Directional Position, Vibration, Movement Detection, Portable Heaters, Games, Toys. Last picture shows a dissected TO-39 case to show internal gold plated ball and four Gold plated contact leads. Mounting: Through Hole (PCB) Operating Temperature: -20 C to 70 C Alternates/Similar Devices: RB-220-07A R, RB-231X2, AG1262-1, 1835-1156-ND, RBS040200 Made in USA Vintage - New Old Stock Significant discounts provided for bulk purchases. Learn More

Hardware/resistor clip. Mounting clip. Dimensions: 12.7mm long x 8.7mm wide at base (outside), 7.8mm wide (inside) x overall 9.7mm high. Learn More

Unidentified MFG - 2505764 - Connector, PCB Eyelet.

Gold Plated.

Dimensions: (1mm ID) 2.7mm D OD x 2.3mm above board.

Shaft 1.5mm D OD.

Package of 50.

Learn More

Tech-Etch Inc - TF250M42C070-16-15 - Beryllium-Copper Fingerstock Gasket, EMI RFI Shielding Strips.

Shielding strips are required by a wide range of industries for a variety of applications. EMI/RFI Shielding Products are designed to either keep out or keep in electromagnetic interference. Shielding reflects and absorbs incident radiation. The higher the attenuation of the shielding, the more effective it is at keeping in or out the undesired electromagnetic interference.

Beryllium Copper (BeCu) is a high performance metal which can be fabricated into a wide variety of components. Its mechanical and electrical properties make it the ideal material for EMI/RFI shielding products.

Beryllium Copper EMI Shielding performance

• High electrical and RF conductivity
• Superior tensile strength & attenuation
• RoHS compliant & recyclable
• Excellent corrosion resistance
• Excellent plating compatibility
• Maximum spring properties
• Moisture and UV resistant
• Superior endurance over other alloys

Clip-on Mounting provides a reliable mechanical installation when there is an accessible mounting flange.

H-Field – 100kHz	E-Field – 10MHz	P-Field – 1GHz
>110 dB	>110 dB	<110 dB

"TF" = Low Compression Force, 0.0025" Thick, 25% Commersion = 15 lbs/ft, 50% Compressions = 35 lbs/ft15

Pitch: 250 Center-to-Center distance one finger to next (Inches X 1000)

Style: "M" Clip No Snag Fingers Feature

Width: 42 Clip Size (Inches X 1000)

Length: Diameter for Contact Rings70

Length" 16".

Application: Beryllium-copper fingerstrips can be used to close a gap between two conductive surfaces. A wide range of diverse installation can be used for a variety of shielded room, door, cabinet doors, cover, printed board, Flashboard., IC shielding.

Alternate: 3012-02008

New Old Stock

 

Learn More

Hardware. Pull-out Pins - Dowell, 1/4" x 3/4". Material: stainless steel. Learn More

Switch, hardware. Button switch actuator/cover. Dimensions: 0.156-0.500". Inside diameter: 0.156". Inside length: 0.500". Inside length tolerance: 0.438" - 0.562". Wall thickness: 0.038". Wall tolerance: 0.028 - 0.048". Color: Black. Learn More

SOUTHCO - SOU47-62-532-50 Hardware, Screw, Fuse Holder Knob.

Material: Stainless Steel

Finish: Powder Coat

Color/Appearance: Black

Knob Style: Knurled

Knob Material: Aluminum Alloy

Thread or Hole Type: 10-32

Head Style: Phillips Recess

Recess Size: Phillips Recess #2

Installation: Snap-in

Series: Styled Knob

Unfastened Screw Projection (mm): 5.90

Class: 47/4C - Captive Screws

Thread size: 10-32.

Fastened screw projection: 10.4 mm (0.41 in). OP thickness: 1.6mm (0.06 in).

Unfastened screw projection: 5.9 mm (0.23) in.

Additional Information: http://www.southco.com/product

Learn More

Hardware, handle repair kit. B-50-A for B-32-A handle assembly. Learn More

Bezel and red lens. Lens: 3.027" long x 0.899" high (Appears scratched). Black plastic bezel: 3.511" long x 1.359" high. New, older stock. Learn More

REES Inc - 04933-091 - Hardware.

The following guards are designed to mount to the single or double plunger push button switches.  They are die cast from a high strength zinc alloy (Zamac #3).

• Additional length mounting screws are provided with each guard.
• Series 09002 legend plates can be mounted on these ring guards. 

Powder Yellow Ring Guard- 1" Height dimensions.

For Use with 09002 Series

Designed to mount to the single or double plunger push button switches.

Complete with mounting screws.

UL, CSA

UPC 64867133091

Alternate: 3264-04933-091

Made in USA

Learn More

Hardware. Pull plate, with 2 handles and hardware. Finish: US32D. NIB. More info: http://www.rockwoodmfg.com/detail_b.php?item=236 Learn More

RADNOTI - 159954 - Universal Stand Clamp for the Medical Industry.

Simply hook on and tighten thumb screw.  No need to disassemble existing stand or remove and replace components to add a an additional component.

Open Sided Connector.

Medium (Red).

Learn More

RAYCHEM TE Connectivity - 222D932-4 - 222D932-4-00/42 - Cable Boot & End Cap.

Seal, Protect, and Strain-Relieve with Heat-Shrinkable Molded Parts in a Range of Shapes and Materials to Help Withstand Harsh Environments.

Heat Shrink Boots, 90 °, Size 222, Lipped, 4, 10, -55 – 135 °C [-67 – 275 °F], Occasional Fluid Exposure

Molded Part Angle (°): 90

Molded Part Shape Code : 222

Lipped : Yes

Material Code : 4

Material: Flame-retardant, Flexible Polyolefin

Temperature Range: -55°C to +135°C

Heat Shrink Boot Material Systems Code : 10

Thermofit Molded Boot 90 degree with Lip

Place over product, heat evenly until the tubing or molded part shrinks into place.

Thermofit Heat Shrinkable Polymer.

Alternate: 808472-000, Newark 45M0482 

Learn More

PULLMAN - MS-053 Band type counter balance 3 lbs.

Hardware Window Sash Balance.

Extends to approximately 3.5 feet.

Mount: Panel, vertical, flange.

Dimensions: Body 7/8" wide x 3-1/6" high.

Flange: 7/8" wide x4-1/3" high with 3-3/4" centers.

Proudly Made in USA

Learn More

Phoenix Contacts - 0202170 - Connector, Terminals Strip.

Status: Discontinued

Type: Bridge, Fixed

Position: 10

Hardware/Contact kit for Phoenix contacts.

059549, FB10-8.

Learn More

Military - MS51957-22 - Hardware, Screw.

Philips Pan Head

4/40 x 1-1/4" Long.

Package of 25.

Learn More

Military - MS35338-39 - Hardware, Washer Split Helical, Locking, 5/64".

Screw Size: 2

Material: Steel.

Finish: Yellow Cadmium II

Dimensions: 4.1mm OD x tiny hole ID.

Hole dia 0.088" min and 0.094" max.

Outside diameter 0.172" max.

Material thickness 0.020" min and 0.026" max.

Note: Military.

Package of 100.

Learn More

Military - SM-B-415072 - Hardware, Flexible ground Strap.

An exceptional, low resistance way to create a point-to-point ground strap.

• Suitable for electrical grounding wire use
• Greater than 99 percent pure copper
• Uninsulated braided strand wire with tin plated coating
• Resistant to failure from flexing
• Meets QQ-W-343 standards for uninsulated annealed copper wire

Material: Fine Strand Tinned Copper, Soft Temper, Corrosion Resistant.

Very Durable and Flexible

 

Flat braid 120 strand, 36AWG.

Lug terminals with mounting hole both ends single conductor.

Lug aperature 0.144", opposite end 0.201".

Material: tinned copper.

Dimensions: Overall 4.2" x 0.188" wide.

With 4-3/16" centers.

Military NSN 5995-00-426-1123.

Applications: Commercial, Aerospace, or Automotive

Proudly Made in USA

Learn More

Military - MS51972-3 - Hardware, Stainless Steel Hex Nuts. Thread 3/8-24, Hexagon A12.

Hexagon A12.

Thread Class: 2b.

Thread Direction: right-hand.

Height: 0.320" min and 0.337" max.

Width across flat: 0.551" min and 0.652" max.

Thread Series: UNF.

Nominal thread size: 0.375".

Material: Stainless Steel

"304 AN" stamp on head (AN=annealed)

NSN 5310-00-903-1524.

Made in USA

Learn More

NSN 5310-01-518-7655 Hardware, Nut. Hexagon Self Locking.

A nut having a flat bottom and 6 sides. An integral feature is incorporated for locking on the threads of a mating member. Excludes NUT (1), SELF-LOCKING, CAP.

Material: Brass.

Note: Military

NSN 5310-01-518-1723. Alternates: 2000250621, 200025062-1, 25CNNEB, 5310-01-518-7655, 01-518-7655, 5310015187655, 200025062, 015187655

Made in USA

 

 

Learn More

Hardware for Leecraft switches. Retaining clip. Package of 10. Learn More

Lot of 25 - Ideal Industries - 30-183 – Insulated Wire Connector, Wire Nut. The IDEAL Wire-Nut wire Wire Connectors are the original twist-on Wire Connectors and feature a positive-grip design for easy installation. Five color-coded models cover hundreds of wire combinations. The fixed square-wire spring provides a secure connection that won't relax over time. Hardware. Wire Connector, Splice. Wire Nut 30-183 Model 83. Material: Plastic, Tough, UL 94V-2 Fame-Retardand Shell. Installation: Twist-On Conductor Accommodation Type: Screw cap with spiral thread single end. Dimensions: 0.562" D x 1.125" long. ID at opening 0.407". Color: Beige. Listed: UL/CSA. Package of 25. Military NSN 5940-00-231-0217. Gardner Bender - Cross:20-G93. Made in USA Learn More