Featured Products

Power Supply, linear, . Output: 0-36V/15A. Input Voltage Range: 115/230 VAC. Operating Mode: CV/CC. Overall Power Rating: 540 VA. Load Regulation: � 0.01%. Line Regulation: � 0.01%. Packaging Style: benchtop. Size: 8" x 5" x 18". Weight: 39 lbs. Output Connections: Binding Posts, rear. Input Connections: Terminals, rear. Note: Fan cooled. Learn More

Power supply unit, for bar code readers, 100-240VAC. With set-up software. Learn More

KEYENCE - AT-210 - Digital Contact Sensor Amplifier Control Module.

Status: Discontinued

Output Voltage: -0.5 ~ +0.5 V.

Output Impedance: 300 Ohm.

Supply voltage: DC12-24V, 10% ripple (PP) 10%.

Measurement Range: -5.0 to +5.0 mm-0.197" to 0.197"

Analog Output Voltage

Output Voltage:  -0.5 to +0.5 V

Impedance: 300 Ω

Resolution: 10 µm 0.39 Mil

Linearity: 0.8% of F.S.

Response: DC to 800 Hz (-3 dB)

Measurement Force: 0.28N*1

Temperature Characteristics: 0.03% of F.S./°C*2

Connection Cord Length: 3 m

Power Voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 %

Current Consumption: 50 mA or less

Ambient Temperature: 0 to +50 °C 32 to 122 °F

Relative Humidity: 35 to 85 % RH (No condensation)

Din Rail Mount

Dimensions: Width:7.00 (in)Height:6.00 (in)Depth:7.00 (in)

Weight: Approx. 100 g

Complete with a 4 conductor cable 9 foot, and attached 4 pin male micro connector.

Made in Japan

New

Learn More

ITE POWER SUPPLY - MKD-35090050 Power Supply, DC.

Output: 9V 50mA.

Input 120VAC 60Hz 0.1Amp.

Complete with a 2.5mm phono plug - (Positive (+) Center on a 6 foot, 22AWG Cord.

Alternate: Texas Instruments TI AC-9180

Note: Heavy output cord can be spliced to alternate size/configuration solder connector plugs.

UL Listed.

New

Learn More

ISS - Industrial Solid State Controls - 1280-1-A - 9918-26 - Switch, Proximity.

Type: Barrel, Inductive - 3 Wire

Normally Open (NO) Contact

Voltage: 10.8 - 30VDC

Load: 80mA.

Used, removed from equipment.

Alternate: 9918-26.

Note: Various length cords, ePicture showing shortes cord.

Made in USA

Learn More

JBT - 3-070 -  Switch, Rocker.

Contacts: SPDT.

Contact Ratings: 5Amp 125VAC. Actuator: On-ON(Mom).

Connection: Solder Terminals.

Mech: PCB with Mount plate 1-1/3" centers.

Note: Black Bat Paddle.

New Old Stock

Made in USA

Learn More

Glass pipettes. 1/10in 1/100ml. Kimax-51 No. 37034. TD 20 Deg C. Dimensions: 0.270" (6.8mm) D x 11-5/16" long. Made in the USA.

Learn More

Hardware, cable ties. 7-7/16" long. Color: natural. Package of 4. Learn More

Hardware, cable ties. 4-3/8" long with a #4 mount hole. Color: natural. Package of 6. Learn More

RED BUTT SPLICES/SKIPPER KIT 5 PCS PER PACKAGE MIN. 4 PAKS /$1.00 Learn More

Connector, circular. Male 128 Pin. Straight. Shell Size - Insert:25-35. Termination: crimp. Fastening Type: bayonet lock. Orientation: normal. Note: Military. Complete with pins- M39029/56-348. (Supersedes MS27490-22D, MS27655-22D). Alt P/N(s): IMS27467T25F35P, MS27467T25F35PPEI. Learn More

Keystone Electronics - 2173 - Rugget Steel Battery Holder, Cylindrical.

An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Retainer clips are available to lock batteries in place and prevent shifting or loosening. Recommended for use where shock or severe vibration is encountered. 

• Ideal for NiCd, Alkaline, NiMH, Carbon, Zinc and Lithium Cells
• Corrosion Resistant, Nickel Plate
• Brass Contacts, Nickel Plate
• Moisture Proof Resin Impregnated, Fibre Insulating Washers

Single "C" Cell Battery Holders

Battery Cross Reference ICE LR14, ANSI/NEDA 14A

Battery Dimensions: Diameter 0.531"- 0.565" X Length 1.906" - 1.988" (13.4-14.5mm X 48.4-50.5mm)

2100 Series with Insulated Contacts from Metal Housing.

Two mounting holes on Bottom 1.34" Spacing.

Chassis Mount.

Solder Lug Terminals.

Heavy Duty - New Old Stock.

Alternates: Digi-Key 36-2173-ND, 2224, 36-224-ND

Learn More

ITUWA - N-110-2 Resistive Neon OptoIsolator, Photoconductor, Photoresistor, or Vactrol. Resistive Opoto-Isolator (RO), also called photoresistive opto-isolator, or Vactrol. Analog opto-isolator or lamp-coupled photocell, is an optoelectronic device consisting of a source and detector of light, which are optically coupled and electrically isolated from each other. An Opto-Isolator is an electronic component that transfers electrical signals between two isolated circuits by using light. Opto-isolators prevent high voltages from affecting the system receiving the signal. Status: Discontinued, New Old Stock High Isolation Voltage Optocoupler Radial Leads, PCB Mount Also known or referred to as an Optical Coupler or Transistor Relay. Neon 2K Ohms ON, 10Meg Ohm OFF, Slow Decay. Resistance Slowly Increases after 110V (100KRes) Power Removed Case: Radial 4-lead upright, similar shape as a radial capacitor. Approximate Dimensions: 0.4” Diameter, 0.7” Height. Made in Japan – Rare - Difficult Component to Find. Similar VTL and Clairex CLM Series Applications include: TTL logic control of AC power, Direct relay substitutes for AC drive, Power line circuit Isolation. Learn More

Connector, circular. Housing gender: plug. Contact gender: male. Circuit count: 24 Pin, gold. Mounting type: Panel, flange. Note: New. Learn More

REI-Genesis ITT Cannon - SK24-24C-1/2 - Connector, circular. Male 24 position.

Connector, circular. Male 24 position. Complete with 021-0128-000 hood, with 90 Deg cable exit.

Learn More

Connector, circular. Male 24 Pin, straight. Complete with end bell assembly #SK21C-1/2 (218-0187-000) and hardware. Mount: cable. Learn More

ITT Cannon - 18220-8 - Connector, Circular.

Rubber bushing specifically designed for MS3057A type cable clamp. Can also be used as a reducing bushing.

For use with MS3057 Connectors.

Bushing only, 2.46" (62.4mm) long, with an 0.426" (10.8mm) ID and 1.6mm thick.

Material: Rubber.

Color: Green.

Alternate: MS3420

Learn More

Connector, circular. Housing gender: receptacle. Contact gender: female. Circuit count: 46 position. Mounting type: Panel mount flange. Note: Complete new sealed bags. Learn More

Connector, D-Sub. DP15P male. Series 3. Complete with 15 Au Pins, kit contains 330-5291-000. Learn More

KEITHLEY - 619 - Electometer / Multimeter.

Digital Electrometer 5.5 Digits.This Digital Electrometer/Multimeter, is designed and optimized to perform the taks of measuring V, I and ohms in an automatic system. It performs all sub tasks related to its mission without imposing constraints on the controller. This Dual Channel Electrometer / Multimeter, is more flexible. It is genuinely expandable. Configured as a single channel, precision bench electrometer/mulitmeter, it offers you sensitivity and convenience unmatched by comparably priced instruments.

Up to 50 readings

Guarding and fast sensitive measurements

Ratio/Difference calculations

External feedback

Baseline store/baseline suppress

Filter

Digital Self Test improved reliability
DC current: 2nA to 2A

DC voltage range: 200mV to 200V

Interface: IEEE-488

Number of digits: 5.5

Resistance range: 2Kohms to 2Tohms

Manual Download: https://download.tek.com/manual/619A(Model619).pdf

Learn More

UnBranded - 8-603 - Audio, Microphone/Speaker for Two Way Radio Walkier Talkie.

Hand Held with Locking Slide Switch Press On-up to Talk

Connectivity: Two Male 2-Conductor Plugs about 5/8" apart, one 2.5mm and one 3.5mm.

Approximate Dimensions: 5.25" high x 1.5" wide.

Color: Light Green

Type of Jack: K 

Vintage - New Old Stock

Made in Japan

Applications: Compatible with various K-Head walkie-talkies

Learn More

FILTER 75-OHM 7DB FIXED 1-11DB VAR Learn More

IC. Extendable hex inverter. Case: 14 dip. Learn More

International Rectifier - IRFP064 Transistor, N-Channel Power MOSFET.

Voltage: 60V.

Current: 70 Amp.

Dissipation: 300 watt.

RDS on: 0.009 Ohm.

Operating temperature: -55 to 175 Deg C.

Package: TO-247AC.

Note: Hexfet.

Learn More