Indicators & Display

DDR-Ruhla - Third Brake Stop Light Assembly, 12VDC, 21 Watt.

In North America, since 1986, all vehicles feature a third brake light. Legally, this is called the Center High Mount Stop Lamp, CHMSL for short, but informally called center brake lamp, high-level or eye-level brake lamp, cyclops brake light, or safety brake lamp.

Durable Thermoplastic Polymer Housing.

Narva® H21W Halogen Bulb is 21 watt with a Bayonet base.

Overall Approximate Dimensions: 7.0" Height X 5.50" Wide X 3" Deep.

Red lens 5.5" wide x 2.9" high.

Round (3.25") Mounting Base has three holes spaced approximately 2.16" apart

Approximate 90 degrees of adjustment. 

Solder lug connections. Wiring leads can exit either back housing or through bottom.

Applications: Automobile/Truck/Trailer Third Brake Light, Collision Avoidance Light, or Red Fog Light.

Other P/N Marking: RFS 8725.3 P25-1 & ZBL 8529.1 

RUCKWARTIGE LICHTSCHEIBENEBENE SENKRECHT ZUR FAHRTRICHTUNG

Quality German Manufacture by DDR-Ruhla.

New Old Stock

Learn More

Citizen Watch Co - 92TA Backlight  Unit - Opto Display.

Normal color is an unobtrusive orange-pink, but when a 9V battery (or 6 - 12VDC) is applied it magically becomes a pinkish white. Bright enough to become the backlight for a citizen compact personal LCD TV. (Not included). 

Electro-Luminescent panel 9VDC.

Size: 1.5 x 2.0".

With internal 9V to High Voltage Inverter.

Overall dimensions: 2.75 x 2.8 x about 0.75" thick, the EL screen itself is very thin.

Applications: Perfect for signs, emergency lighting, special effects. Can also be used on 120VAC with out the inverter.

Note: When you look at it with the two electrical connections on top, the positive is on the left. Large Light !

Made in Japan

UPC 81514 00920

Learn More

Chicago Miniature Lab - CM623 - Miniature Lamps.

Pins on either side of the base lock these bulbs into sockets. 

28V 0.37Amp 15 watt.

Base: Bayonet SA15S 15mm, Single Contact.

Life: 1000 hours.

Bulb Shape G6 Globe.

MSCP: 6.0

Filament Type: 2C-2V

Lens: Clear.

Dimensions: 0.750"  (15mm) Diameter, 1.44" (36.6mm) Length

Proudly Made in USA

Alternates: GE 623

Learn More

Chicago Miniature Lab - CM3965 Lamp / Bulb.

Status: Discontinued

Type: Incandescent

Voltage: 5V. Bi-Pin Base, T1 3/4 (T1.75)

Bulb Diameter: 0.236" Max. (6.0mm)

Bulb Length: 0.625"' Max (16mm)

Lead Spacing: 0.125" Nominal (3.2mm)

Leads Length: 0.250 +/-0.020" (6.35mm) Gold Plated

Lens: Clear.

Lens Size: RT-1 3/4, 6mm

Lens Style: Round with Domed Top

Similar: CM3149. CM7360, CM7361, CM7362, CM7363, 3149, 7360, 7362, 7363

Package of 10.

New Old Stock - Rare -Vintage

Made in USA

 

Learn More

ACME 8-779 – Multi SegmenBar Graph Display. Eight (8) LED Strip. Opto Display Multi Segment, High Quality Led Mount . Eight (8) LED Strip. Seven (7) Rectangular Discreet LEDs and 1 Bipolar LED. LED Voltage: 3 - 4 VDC Dimensions: Each LED is 4.8mm x 2mm. (Removeable) Overall unit is 56.6mm wide x 19.5mm tall x 13.1 mm deep. Overall Dimensions with leads 18.1mm deep. Right Angle View, Right Angle Mount. From Left: 4 Red, One White Bipolar, Space 2 Red, One Yellow. LEDs can be removed and replaced with Rectangular RGB Manufacture: ACME of Japan. Applications: Instrumentation, Arduino or Science Fair Projects. New Old Stock Learn More

Quartz Tungsten J Type T3 Halogen Lamp

Manufactured with multi-filament support, these bulbs outlast and are far superior to ordinary bulbs you get at the store. White, crisp halogen light provides energy efficient lighting for home, office or shop use. The multi-filament supports resist vibration and provides for long life. 

Energy Used: 130V 300 watt.

Size: 4.64" Long. (118 mm)

Life: 3000 Hour Minimum

Type: Bright White  Tubular Rough Service

Construction: Clear finish, Ceramic Double Ended RSC base

Brightness: 6,000 Lumens

UL

Alternate: 58998

Applications: Double ended bulbs are commonly used for security lighting, work lights, high-end accent fixtures, and torchiere table or floor lamps.

Learn More

Western Electric - 8-048 – Panel Mount Indicator, Telephone Slide Base Lamp Socket w/ Red Len Cap. The product is a set of 4 Western Electric panel mount telephone wedge lamp sockets with red lenses. These units are designed for industrial automation and motion control applications. Made in the United States, they are sturdy and reliable components for indicating signals in a professional setting. The Western Electric brand ensures high quality and durability, making these lamp sockets a practical choice for various industrial uses. Telephone Slide Base Style Lamp Sockets Mount: Panel Mount Lens Cap: Raised Red Polycarbonate Translucent Lens Cap With 2 Nuts and Solder Terminals Dimensions: 1.4" Long Threaded Barrel Lens Approximately 0.7" Long, 0.5" Diameter Overall Length: 2" (Minus Solder Terminals) Bulb Type : Western Electric K2 Lamps (Purchased Separately) Note: Slide Base Indicator Lamps: These are small, miniature lamps with a slide base, typically used to indicate the status of a telephone line or other electrical circuit. Telephone base miniature light bulbs have a tapered cap with blade-like contacts that extend up the sides of the lamp and slide into a matching telephone socket. They are commonly used as indicator lights in control panels and switches. New Old Stock – Rare - Vintage - Difficult to Find Sockets Alternates: Nos. 12, 13, 30, 34, 49, 50 Sockets Made in USA Applications: Telephone Switchboard Learn More

Western Electric - 2-Y - SWBD - Panel / Switchboard Lamp

Slide Base Indicator Lamp, Carbon Filament

Miniature Telephone Light Bulb

Voltage/Current: 48V, 30-42mA

Lamp Diameter: 0.3075"

Used with Nos. 12, 13, 30, 34, 49, 50 or similar type lamp sockets

Genuine Western Electric - Factory Vintage New Old Stock

Made in USA

Priced per Bulb

Learn More

Clear Lucite - Light Diffuser.

Overall Dimensions 1.4"OD x 1.94"High.

Coarse Threaded Outer Diameter measures 1.250" Inner  Thread Diameter 1.17"

Threaded at bottom with large hole inside 1.5" Deep Rounded by 0.47" I.D.

Made in Taiwan

Package of 2

Learn More

Quartz Tungsten J Type T3 Halogen Lamp

Manufactured with multi-filament support, these bulbs outlast and are far superior to ordinary bulbs you get at the store. White, crisp halogen light provides energy efficient lighting for home, office or shop use. The multi-filament supports resist vibration and provides for long life. 

Energy Used: 130V 500 watt.

Size: 4.64" Long. (118 mm)

Life: 2000 Hour Minimum

Type: Bright White  Tubular Rough Service

Construction: Clear finish, Ceramic Double Ended RSC base

Brightness: 9,500 Lumens

Applications: Double ended bulbs are commonly used for security lighting, work lights, high-end accent fixtures, and torchiere table or floor lamps.

Learn More

CAPSUL - 0706 - 3921C - Electroluminescent Panel Driver Inverter.

A power inverter for an electroluminescent device  enables the electroluminescent device to be powered from a low voltage DC power source. Switching transistors convert the low voltage DC power to AC power which is subsequently increased and coupled to a resonant circuit including the electroluminescent device. Current in the resonant circuit is sampled, referenced to half the low voltage DC power, and coupled back in phase to an amplifier and switching transistors to create an oscillator which oscillates at a frequency determined by the resonant circuit.

Input: 7.5VDC.

Output: 110VAC.

Connections; 0.25" Male QC Terminals.

Color: Blue.

Dimensions: 1.63" Long x 1.21" Wide x 1.147" High.

New Old Stock

Learn More

Triad/Magnetek - 1030-32-500K - Mercury Ballast Kit.

Universal Mercury and Metal Halide High Intensity Discharge Lamp Ballast Replacement Kit for 250Watt H-37 Lamp.

Autotransformer Mercury Ballast and 22.5uF 280VAC Oil Capacitor, with brackets & instruction sheet.

480VAC 60Hz

Alternates: 47500 H250/480-KIT, 71A3542, 71A3542-001D

Learn More

GTE Sylvania - GB13J – 13J - Resistance Lamp, Draws 0.5Amp @ 36V, New A "resistance lamp" refers to a type of lamp, typically an incandescent bulb, where the light is produced by a filament that has a significant electrical resistance, causing it to heat up and glow when current flows through it; essentially, the filament acts as a resistor that generates light due to its high resistance to current flow. Primarily used to control the current flow in a circuit by intentionally limiting the amount of electricity passing through it, often in situations where a precise level of current is needed, like in older lighting systems or specific electronic applications where a stable, controlled current is required. Status: Discontinued The No. 13 Type Resistance Lamps are the same as the No. 12 Type Resistance Lamps except they are equipped with moulded bases and soldering terminals instead of the screw bases. Approximate overall length 4 - 1/4 inches. Diameter approximately 15/16 inch. Also referred to as Resistance Lamp Ballast Relay Tubes. Type: Tungsten filament resistor lamps are equipped with a molded base having two soldering terminals. Average current at 1V is 0.130Amps, 5V is 0.274 Amps, 40V is 0.634 Amps Alternate: Northern Electric NE-13J, Western Electric Type 13J, Applications: 13J Resistance Lamp is a current regulator tube. It is used in early telecommunications apparatus. New Old Stock – Vintage - Rare Made in USA Learn More

SCHURTER - 0035.6722 - Lamps & Lights.

Panel Indicator, 220VAC 0.5 watt.

Mount: Panel 3/8" snap in.

Lens: Red.

Note: Type LRE16/220V.

Learn More

LCD, liquid crystal display. Has (4) NEC'8834 (date code) D7227G integrated circuits on the back, and a male 8 x 2 connector. Surface mount. Dimensions: Display 6" x 1-9/16". Board 8-9/16" long x 3-1/8" high. For hole mount with 8-1/2" centers. New. Note: No specification sheet available. Learn More

IC. Dot matrix display controller. 20 Character display driver cascadable to 80. Standard 5 x 7 character font. Double marked 10939-II. Package: 40 Dip. Learn More

LED board. T-Ring II Protector. Each board has 6 SMD mounted LED(s), and two 24 position connectors to mate the ribbon cables. Each will come with two 24 conductor flexible 2" ribbon cable/connector. Dimensions: 3.042" long x 1.728" wide x 0.729" high including the four mounting spacers attached. Note: Hookup instructions not available. Learn More

Genuine Osram Sylvania - 6451 Lamps & Lights.

Ratings: 12V 1.25Amp 15 watt.

Type: Incandescent miniature / Automotive light bulb.

Base: Festoon SV8.5-8.

Dimensions: 0.557" D x 1" long.

Overall with metal end/mount 1.683" long.

Bulb Finish: Clear

Lumens: 220

Note: Difficult to find and superior to inferior after market replacements.

Note: Alt P/N: 64510.

Learn More

National Semiconductor Corp - NSN507 Opto displays.

2 Digit, 7 segment,

0.7". CA.

Direct-drive, Red.

Case: Dual inline 20 pin, 2 rows, 0.100" spacing, rows 0.93" apart.

Package of 2.

Learn More

NEC Corporation - FIP6A5 Fluorescent Opto Display.

Tube No.7F/2.

Package: 15 pin, glass.

Part Number: E2SF-N955-AA.

Appications: Used in ford premium sound digital radios mid 1980 's including mustang, thunder bird, Lincoln, bronco, and others.

Made in Japan

Learn More

MSC - 351-29862-003 - Hardware, Heaksink.

Lockheed Assembly 6133771-3 with 8 displays.

Material: Aluminum Alloy 2024.

Dimensions Overall: 6.870" long x 0.812" high x 1.120" wide.

Military NSN 5999-01-097-3865 or NIIN 010973865.

Learn More

LED Light Bar - High Efficiency Red 5-PIN 9/16 X 5/16" (H) Series. LED DIP 5-pin Number LEDs in Array=2, Red 635nm V(F) Max.=2.8 , @20mA Iv Min. Luminous Intensity=3.8mcd @ I(F) =10mA, P(D)=75mW Learn More

Leviton - 13351 - Lampholders/Tombstones.

This Leviton T8 or T12 low profile lamp holder is for use with fluorescent lamps having a medium bi-pin base.

Non-shunted Bi-pin Lamp Holders/Tombstones.

Low Profile, Slide-On, Snap-On, or Bolt-On Mount. 

Quickwire 18AWG Solid or Str Tinned.

For T8 LED Replacement and all T8/T10/T12 Fluorescent lamps, 600V 660 watt.

Listed: UL/CSA.

UPC: 041175370918

Package of 2.

Learn More

LEECRAFT - V C 25-212-1 Lamps & Lights.

Socket with 6" wire leads for midget grooved based lamps.

Package of 10.

Learn More