Semiconductors - ICs

ALTERA - EP610DC-25 - IC. ELPD Programmed Erasable Memory. 

Used, Clean Socket Pulls

 

 

Learn More

TE Connectivity AUGAT - 828-AG11D-LF - IC Sockets. 28 Contact Dip.

Using IC sockets is advisable on boards with point to point wiring because replacing a defective IC is time consuming and can possibly damage your prototype board. The use of an IC socket is inexpensive compared to the time and effort required to replace an IC chip. IC sockets also reduce the possibility of damaging the board when swapping out IC's.
Number of Pins: 28 (14 x 2)
Type: Open Frame
Row Spacing: 15.24mm (0.60")
Pitch: 2.54mm (0.10")
Mounting: Through Hole

Dimensions:
Length: 35.5 (1.4")
Width: 17.7mm (0.7")
Height (including pins): 7.33mm (0.29")

Manufactured by: Augat (TE Connectivity)
Part Number: 1828-AR111D

 

 

 

Learn More

Sanyo - STK439 - IC, Audio.

2 Channel AF Power Amplifier.

VCC 39V, 56V max.

15 Watts Minimum.

Package: Thick Film Hybrid 15 Sip.

Original Sanyo - New Old Stock

Removed from Manufacture Pkg's.

Similar to ECG1219

Additional Forum Information: https://www.diyaudio.com/community/threads/stk439-internal-component-values.383906/

Learn More

IC socket, 181-Pin Grid Array machined-pins. Gold plated socket contacts, tin-plated pins. Dimensions: 38mm square. Learn More

IC, sockets. Machined 144 pin grid array. Gold contacts, 38mm square. Learn More

E-tec Interconnect - TOS-508-S118-95 - IC Sockets, TO-99-8 Pin, Machined Gold Contact For more than 45 years E-tec Interconnect designs, develops, manufactures standard & custom connectors on a Worldwide basis for Highest Reliability Medical, Military, Industrial and Audio Applications. Connector, IC Sockets, High Reliability, Highest quality machine socket for the Best Audio ICs. • Machined Pins: Unlike standard, cheaper stamped-pin sockets, machined-pin sockets feature cylindrical, high-precision contacts that provide a more reliable and secure connection. • Gold Contacts: Gold plating is used for superior conductivity and resistance to corrosion, which is crucial for long-term reliability and performance, particularly in sensitive applications. Trust TO-99 IC to Gold Contacts, not lead and tin. (Standard for 8 Pin LM741 Metal Can Op-Amps) Machined pin male side and female side. Index tab for alignment of Pin 1. 8 Pin Metal Can Round for TO-99, Low Profile The pins are arranged on a circle with a diameter of approximately 0.200 inches (5.08 mm). Heat Resistant Body Machined Pins, Gold Contact Inlays. Contact Material: Beryllium Copper (BeCu) Contact Plating: Gold over Nickel Gold Plated Beryllium Copper for superior conductivity and corrosion resistance. Mounting: Through Hole Features: Closed Frame Highest Quality - All Surfaces Gold Plated – Embedded Terminals - 4 Finger Clips Housing Material: PBT (Polybutylene Terephthalate) UL94V-0 Operating Temperature: -55°C ~ 125°C Current Rating: 1 Amps /100V Color: Black. Made for Picker International / Marconi Medical Systems – Philips – Medical X-Ray Equipment P/N 402-027 Genuine E-tec Interconnect AG – No Counterfeit – No China – No Delays – No Dissapouinments Made in Switzerland New Old Stock - Legacy Component Gold Plating was much thicker Note: Same Footprint but different heights for TO-5-8, TO-78, TO-79, TO-80 Alternates: Augat 8058-1G49, Mill Max 917-43-108-41-005000 Applications: Used for integrating Transistor Arrays, ICs, and other components in High-Fidelity Audio, Military, Aerospace, and Medical Devices. Learn More

IC. Case: 68 Cdip Gold leads SMD. Learn More

IC. Charge-coupled device (CCD). Case: 44 SMD. Used, perfect socket pulls/guaranteed. Learn More

IC. Thick film Hybrid dual channel power driver includes complementary paired darlington transistors rated at 60V 10Amp, ultra high gains. Actual transistors, 2 each, 2N6667 and 2N6387. Complete with specification sheet. Learn More

IC. CMOS 4/8 channel analog switch multiplexer. Case: 16 Cdip, pulls/used, white ceramic gold leads. Learn More

SANYO - STK780 - IC, Thick Film Hybrid.

One chopper type output switching regulators / FM noise canceller for car radio.

Package: SEP15P

Learn More

SCANBE - 70014-54 Connectors, DIP Sockets.

14 DIP, Solder Tail.

From: Manufactures trays.

Pitch 2.54mm

Package of 25.

Learn More

ROBINSON NUGENT - ICU-143-S6-T Connectors, IC sockets.

14 Dip, Solder Tail.

Package of 25. Full Manufacturers Tube.

Alternate: TE Connectivity  1-390261-3

Learn More

ROBINSON - NUGENT - ICN246S4G

Connectors, IC Sockets, Machined Pins

24 PIN DIP Gold Contacts, Low Profile (Wide).

Dimensions: Length 1.195"  Width 0.775" X Terminal Length 0.110"

Alternates: DILB24P-11T, T011-24, C9324-02

NSN: 5935-01-104-5321

New Old Stock

Package of 10.

Learn More

IC. Dot matrix display controller. 20 Character display driver cascadable to 80. Standard 5 x 7 character font. Double marked 10939-II. Package: 40 Dip. Learn More

Connector, IC socket. Housing gender: female. Circuit count: 64 Position. Housing material: plastic. Mounting type: PCB. Note: Low profile. Package of 10. Learn More

ROBINSON - NUGENT - PGA068CM3SLTG-50 – PGA IC Sockets, 68 Pin Grid Array, Machined Gold Contacts. The PGA068CM3SLTG-50 is a 68-pin Integrated Circuit (IC) socket manufactured by Robinson Nugent. It is designed for components using a Pin Grid Array (PGA). These solder tail PGA (Pin Grid Array) sockets accommodate standard pin grid devices. Robinson Nugent, Inc., acquired by 3M, is most noted for reliable products such as electronic connectors and integrated socket circuit sockets. Technical Specifications • Pin Count: 68 pins. • Grid Layout: 11 x 11 array. • Machined Pins, Gol Contacts • Tin Plated Tails • Temperature: -55 C to 125 C • Screw Machine: 0.100” x 0.100” (2.54mm) Pitch • Insertion Type: Low Insertion Force (LIF), making it easier to install or remove the IC without damaging the pins. • Alternative Part Numbers: Also identified as PGA68, 68-PGM11033-10, 510-83-068-11-061101, or RD0595. Made in USA New Old Stock Learn More

ROBINSON - NUGENT - ICN224S4 – Connector, IC socket. 22 Dip, ST. Package of 38 3M Acquired Robinson Nugent in October 1999 Type: ICN Series Dual Wipe Sockets • Features: Dual-wipe contacts for high reliability, anti-wicking wafer to prevent solder wicking, and serve as a protective interface for ICs on Printed Circuit Boards (PCBs). • Purpose: Protect sensitive ICs from soldering heat and allow for easy insertion/removal and replacement of chips Body Material: Polyamide Nylon Body Style: Top Mount Overall Length: 1.095” Nominal Terminal Length 0.110” Nominal Overall Width: 0.575” Nominal Pitch Spacing: 0.100” (2.54mm) Contact Material: Copper Current Rating: 1A Operating Temperature: -65C to 105C Flammability Rating: UL 94V-0 Body Material: Black Polyester, Glass Filled Accommodated Contact Quantity: 22 Printed Circuit Board Hole Arrangement Style: Twenty Two Hole Mounting Method: Terminal Mounting Type for Which Designed: Printed Circuit Contact Position Arrangement Style: Dual in-line Terminal Type and Quantity: 22 solder Stud Alternates: 31410249-2001, 353-2201, 5001-320 Made in USA Vintage New Old Stock Robinson Nugent Learn More

SAMTEC - KEL-640-35-T Connectors, IC Sockets.

40 Dip, Low Profile Solder Tail.

Package of 10.

Alternates: A 40-LC-TT, TO2-40, AT-LPS-40-6, 8903-40TU, DILB40P-223T

Learn More

Mill-Max - 510-91-084-10-031-001 Connector PGA , IC socket, Through-hole.

84 Pin.

Grid Array.

Contacts: Copper with Gold Plated, Machined Pins.

Number of Pins 84

Dimensions: Height 4.19 mm, Length 25.4 mm, Width 25.4 mm

MMX510-91-084-10-031-001.

High Quality New Old Stock

Learn More

IC, EPROM, CMOS. 32K x 8 . UV Eraseable. Package: 32 LCC. Learn More

IC, TTL. Universal count/display circuit. Package: 28 Cdip. Used/socket pulls. Obsolete. Learn More

Connectors, IC sockets. 20 Dip, chip carrier. Machined brass with gold over nickel plating, 0.100" centers. Learn More

IC, amplifier. 50Mhz current feedback. Case: 8 Dip. Learn More