Related Equipment

Encoder, optical incremental. 1024 Resolution. 24VDC in, 5VDC DLD out. Channel A, B and Z. Series A. Mount: square flange. Shaft: 3/8" D. With a CA3102R18-1P 10 Pin flange male connector and mate CA06R18-1S 10 Pos female cable mount. Note: ALT P/N 98301075. Complete with manufactures installation instructions. Made in the USA. Learn More

Optical Incremental Encoder. Diemsnsions: 64mm with a shaft 9.5mm. Has a 10 Pin MS3102E18-1P male connector. Mount: 3 hole, 42mm apart. Overall: 91mm tall including shaft. Learn More

Trane GE - D340316P13 - Programmable Variable Speed Furnace Blower Motor, GE ECM Module.

Power: 1/2 HP

Voltage: 115VAC, 60Hz

Current: 8.0 Amps

Rotation: CCW

Designed for Trane/American Standard Furnaces 

Genuine GE

Replaces MOT5432S

Approximate Dimensions: 5.50" Diameter X 3.10" Deep

New Old Stock

Learn More

BJT595 Carbon Graphite Motor/Generator, Electrical Brush.

Tamped Connections In Four Spots

Split Brush

Heavy Duty Brass Brush Clip

Heavy Duty Copper Shunt

Brush Dimensions: 1.8" Long X 1.30" Wide X 0.55" Thick

Shunt Leads approximately 4" Long

Learn More

Slo-Syn Inertial Flywheel. Dimensions: 3.99" D x 1.78" deep. For 0.35" shaft. Weight: 3.918 lbs. Learn More

SIEMENS - 3RP1511-1AP30 - ON-DELAY RELAY

0.5-10Sec 24V/240V.

Only 0.89" wide 1-NO 1-NC -

Guaranteed Functional

Usede / Removed from Equipment

Learn More

Encoder, Rotary. 3600-Pulse/Rev 12VDC. 122mmD x 140mmL with 0.6"[15mm] flatted shaft 1''Long. 5-Inch [127mm] Flange mount. Learn More

Rotary shaft encoder. Learn More

Bearing unit. Each with 6202DU seal. Learn More

Circuit breaker. 3P 30Amp 600VAC 250VDC. Series C. Instantaneous trip settings: 90-300Amps Cu/Al-UL Cu Only-CSA circuit breakers.

Learn More

Contactor, Reversing. Size A. Coil:24VDC. 3-Pole open type. Auxilliary: (2) N.C.I.-DC HP: 1.5 at 200/230V, 3A 460V, 5A 575V. 5.2"L x 3.5"W x 5.6"H. weighs 2.5 lbs unpacked. Learn More

Reducer. Gear Ratio: 20:1. Torque: 684 lb-in. Frame Size: 56C. 31 lbs. Note: 900C-Series F921-20-B5-G. Refilled with Mobil SHC634 Oil. Spec:GR0133B013. Learn More

Encoder. Marked: Resocoder. Mount: Panel, mount plate 2.654" square with 4 holes at 2.85" centers. Dimensions: body 2.5" D x 3.42" long, plus shaft, mount flange and connector. Shaft: 0.38" D x 0.846" long. Has one 10 Position male circular connector, part number MS3102E18-1P. Used/Removed from equipment. Overall length of unit is 5.75". Note: No other information available. Learn More

Motor clutch assembly 90VDC, 3/4" bore. Cross or alternate part number: 5162-271-003. More info: http://www.warnerelectric.com/PDF/P-1234_pg64-73.pdf Learn More

Warner Electric / Superior - 5371-273-047 - Clutch Brake EUM -215-1020 90V.

The electric clutch and brake has been called the best thing that ever happened to the electric motor. It’s simple, electric clutches and brakes do all the work, while permitting motors to run smoothly and continuously at their most efficient speed by connecting/disconnecting the motor and the load. Fast starts and stops, easy control interface, remote pushbutton operation and smooth acceleration and deceleration are outstanding user benefits.

EUM (black) units are totally enclosed to keep wear particles in and exclude contaminants and are suitable for most industrial applications.

Voltage: 90DC

NEMA Frame Size: 213TC/215TC

 

Learn More

Warner Electric - Altra Industrial Motion - Part # 5151-541-004 Involuted Splined Hub

Founded in 1927, Warner Electric has grown to become a global leader in the development of innovative electromagnetic clutch & brake solutions

Spline Location: Splined Hub for Magnetic Brake.

Bore Diameter: 5/8" (0.625") 

For use with ERS-42 - Holding torque 7 lb. ft.

Splined Hub ERS-42-5/8.

UPC 786582038616

Factory New

Made in USA

Additional Information: https://www.altraliterature.com/-/media/Files/Literature/Brand/warner-electric/catalogs/p-1234-we-sections/p-1234-wepages108-116.ashx

Learn More

Warner Electric - Altra -5300-101-008 Hardware kit.

Mounting Accessory for Clutch or Brake - PB, PCBC, SFPBC Series, Compatible Model / Part Number PB-500 (Heavy Duty), PB-500 (Normal Duty), PCBC-500 (Heavy Duty), PCBC-500 (Normal Duty), SFPBC-500 (Heavy Duty), SFPBC-500 (Normal Duty)

Mounting accessories 500 OM for the PB-600 Normal Duty Magmetic Brake.

More info: https://www.warnerelectric.com/products/brake-products

Learn More

Mounting accessory ER-650. More info: http://www.warnernet.com/PDF/P-1234_pg214-217.pdf Learn More

Altra Industrial Motion - Warner Electric - 5104-451-033 Clutch Coupling. Model SF-400.

EP Series, FLD EP/SF/SFC-400 24V FM.

Compatible Model/Part Number EP-400

24VDC 8.9 watt max, 4500RPM max.

Mount: flange.

COMPATIBLE MODEL / PART NUMBER EP-400

FIELD ASSEMBLY FOR CLUTCH OR BRAKE - EP SERIES

FLD EP/SF/SFC-400 24V FM

Clutch Brake

Motors/Gear Box/Clutch Weight: 2.00 pounds

With Installaiton & Operation Manual 819-0188

Instructions: https://www.altraliterature.com/-/media/Files/Literature/Brand/warner-electric/service-manuals/p-1390-we.ashx

 

 

 

 

 

 

 

More info: http://www.warnerelectric.com/PDF/SFC400F.pdf

Learn More

Altra Motion -Warner Electric - 110-0111 Armature EP/PB/SF/SFC-170.

Armature Assembly with Autogap for Clutch or Brake - EP Series, Compatible Model / Part Number EP-170

UPC: 786582001948

More info: https://www.warnerelectric.com/-/media/Files/Literature/Brand/warner-electric/service-manuals/p-0212-we.ashx

Learn More

Conduit box kit 100-1. For Clutch-Brake. This Warner Electric conduit box is designed to provide a proper means for field wiring termination and power entry into Warner Electric ATseries clutches and brakes. Kit No. 5162-101-002. Instructions for assembly included. More info: http://www.warnernet.com/PDF/P-1234_pg202-205.pdf Learn More

Motor brush. Our VS-2 is steel enclosed with an internal botton spring. Base: flange 0.618" (15.7mm) long x 0.277" (9.5mm) wide. Housing height: overall 0.534" (13.5mm). Carbon element is extended out of top 3.2mm high x 6.2mm long x 2.2mm thick. Note: Manufacture logo is a diamond with GS in the center.

Learn More

Shaft Angle Encoder 4.7mm round shaft ~ 27mm diameter, has long cable with MS connector. Learn More

General Electric - CR101H400H - Manual Motor Starter.

Enclosure NEMA 4

Number of Poles 2

Number of Thermal Units 1

Current Rating: 16 Amperes

Type:     Full Voltage

1 Phase HP/Volts: 1/4 HP at 32 VAC, 1 HP at 115/230 VAC, 3/4 HP at 277 VAC 25 to 60 Hz

Dimensions: Length 2 3/4 Inches, Depth 4 9/16 Inches, Width 4 1/4 Inches

Weight: 3.75 lbs.

1 HP Maximum

Toggle, With Handle Guard/Lock Off.

Genuine General Electric - Factory New Old Stock

Learn More