Special Relay
- CP Clare & Co. - HGRM52112S05 - Relay Mercury Wetted Reed Relay, Contacts SPDT 100VA, 3V Coil.READY TO SHIP - ONLY 40 LEFT IN STOCK!
CP Clare & Co. - HGRM52112S05 Relay Mercury Wetted Contacts Reed Relay, SPDT 100VA, 3V Coil.
Relay, Mercury Hg.
Form: C, Bistable
Contacts: SPDT.
Contact Ratings: 100VA.
Coil Winding: Bifilar.
Coil Voltage: 3 V Typical, 5 V Max.
Coil Resistance: 26 Ohm.
Current: 5 Amps
Switching Frequency: 200 Hz
Operating Temperature: -38 C to 85 C
Mech Mtg: PCB, Unshielded.
Size: 1.61x 0.565 x 0.435" high.
Weight: 15 Grams
Note: Mercury Wetted. Signaaling.
UL Recognized, CSA certification, FCC68 Compatible
Learn More - CP Clare & Co. - HGJ2MT54211P02 - Relay Mercury Wetted Contacts DPDT 100VA-24VDCIN STOCK - MORE THAN 100 READY TO SHIP!
CP Clare & Co. - HGJ2MT54211P02 - Relay Mercury Wetted Contacts
Relay, Mercury Hg.
Contacts: DPDT.
Contact Ratings: 100VA.
Coil Voltage: 24VDC.
Coil Resistance: 1400 Ohm.
Mech Mtg: PCB, shielded.
Size: 1.6 x 1.0 x 0.4" high.
Weight: 0.8 oz.
Note: Mercury Wetted. High sensitivity. Singe-sided stable, 1mS response.
Learn More - Western Electric - WE327F - Reed Relay Dual coil SPST-NO
Western Electric - WE327F RELAY Dual-Coil PCB-Mount Shielded
Telephone Use
SPST-NO 6-PIN
Weight: 1.3oz
Dimensions:1.9" x 0.64" x 0.6" high
Metal enclosure
Appears to have two coils 600-OHM & 80-OHM
Learn More - Unidentified MFG - 159-157-RA1 - Relay, Reed. SPDT Mercury Hg-Wetted, Form C,IN STOCK - MORE THAN 1,000 READY TO SHIP!
159-157-RA1 Relay, Reed. Mercury Hg-Wetted, Form C.
The mercury-wetted contact relay represents one of the more sophisticated types of relays made today. The early pioneer work in mercury-wetted contact switching dates back to the 1950’s, as telephone laboratory scientists sought out the “perfect contact”.
Reed relays use an external electromagnet to control the reed switch. The contacts are of magnetic material and the electromagnet acts directly on them without requiring an armature to move them. Sealed in a glass tube, the contacts are protected from corrosion. Mercury-wetted relays are fast in operation and have relatively good load carrying capacity and long life. The mercury films are reestablished at each contact closure and contact erosion is eliminated. The mercury films are stretchable, there is no contact bounce and because it is a mercury contact, the contact resistance is very low and idea for low level switching applications.
A mercury-wetted reed relay is a form of reed relay that employs a mercury switch, in which the contacts are wetted with mercury. Mercury reduces the contact resistance and mitigates the associated voltage drop. For high-speed applications, the mercury eliminates contact bounce, and provides virtually instantaneous circuit closure. Mercury wetted relays are position-sensitive and must be mounted according to the manufacturer's specifications. Because of the toxicity and expense of liquid mercury, these relays have increasingly fallen into disuse.
The high speed of switching action of the mercury-wetted relay is a notable advantage. The mercury globules on each contact coalesce, and the current rise time through the contacts is generally considered to be a few picoseconds. However, in a practical circuit it may be limited by the inductance of the contacts and wiring. It was quite common, before restrictions on the use of mercury, to use a mercury-wetted relay in the laboratory as a convenient means of generating fast rise time pulses, however although the rise time may be picoseconds, the exact timing of the event is, like all other types of relay, subject to considerable jitter, possibly milliseconds, due to mechanical imperfections. The only major weakness of a mercury wetted contact relay is the necessity to mount the relay within 30° of a vertical position, due to its position sensitivity.
Type: Form C
Contacts: SPDT.
Switched Load Rating: 2 Amp, 500 Volts Max, 100 VA Maximum
Carry Load Rating: 5 Amp
Contact Resistance: 14 Milliohms Typical, 20 Milliohms Max.
Packaging: Under High Pressure in Glass Capsules.
Approximate Dimensions 5.8mm D x 38mm Long. (0.225" X 1.5")
Life Expectancy: 1 billion operations minimum at rated load.
Note: Mercury Hg-Wetted.
Danger - High Pressure Glass Capsule- Handle with Care - User assumes responsibility and competency to handle this item.
Learn More - TE Connectivity Potter & Brumfield - GM11A-120 - Open Frame Relay, 120VAC DPDT-3A Impulse / Sequencing RELAYSSpecial Price $39.98 Regular Price $69.00
TE Connectivity Potter & Brumfield - GM11A-120 - Open Frame Relay
Ratings: 120VAC 1.6W
Ratchet-Operated Impulse / Sequencing
LATCHING DPDT-3A
Single Coil 50/60HZ
DPDT- 3A
Repetition Rate: 10pulses/sec
420-ohms 75mA
50%duty cycle 5min ON, 5min OFF
Genuine Potter & BrumfieldNew Old Stock
Proudly Made in USA
Learn More - Siemens Furnas - 41NB21AG - Relay, AC. 2 Pole NO/ 1Pole NC, 25Amp, Coil: 208-240VAC 600 Ohm.READY TO SHIP - ONLY 89 LEFT IN STOCK!
Siemens Furnas - 41NB21AG - Relay, AC.
Status: Discontinued
Air Conditioning Definite Purpose Magnetic Contactor
Unlike General purpose contactors, which are rated typically based on HorsePower (HP) of the motor, Definite Purpose contactors are rated on Motor Full Load Amps (FLA).
Series A, LI Pilot Pole, Open Frame
Standard Duty 240 VAC Max.
Contactor: 120/240VAC 25A.
Contacts: 2P NO, 1P NC
Locked Rotor Amps: 150A
Welded Resistant Silver Cadmium Oxide contacts
Reinforced Thermoset Polyester Housing
Plus Aux NC contact in center.
Coil: 208-240VAC 50/60 Hz, 600 Ohm.
Connection: Screw Terminals with 1/4" Copper Lugs with Solder Holes.
Electrical Conf: DPST Normally Open.
Mech: Two Mounting Slots 1.7" spacing.
Dimensions: 2.5" x 2.7" x 2.7"H.
UPC 783087 071759
Alternate: D54790-135
Weight: 10 oz.
Approvals: UL, SAE
Series A, 54790-135
Applications: Typical applications include cooling towers, refrigeration equipment, and commercial HVAC. Air Conditioner, NEMA
contactors provide the switching (on/off) function.
Note: Designed with a low drop out voltage making them ideal for air conditioning, heating and refrigeration applications. Space saving dimensions allow for smaller panels and more wiring room. The combination of multiple mounting holes and slots allows these contactors to be fastened onto panels and provide interchangeable mounting with many competitive contactors.
Siemens starters and contactors includes replacement products for parts formerly produced by Furnas Electric, including Furnas contactors and motor starters.
Made in USA
New Old Stock in Manufacturer's Packaging
Learn More - Crouzet Schneider GORDOS - 741A-7 - 24VDC SIP Dry Reed Relay, Solid State Relay, Normally Open Contacts.IN STOCK - MORE THAN 500 READY TO SHIP!
GORDOS Reed Relay 741A-7, 74 Series SIP, Solid State Relay
Features: These Gordos Relays are molded in semiconductor-grade molding compounds that meet Underwriters Labortories 94V-0 flammability rating.
RF Characteristis
- Insertion loss 0.3 dBA from 1 to 500 Mhz
- Isolation: 30 dB min. from 1 to 600 Mhz.
- Characteristic Impedance 50, or 75 Ohms
Compatible with automatice insertion.
Logic compatible.
4 Pin PC Mount
Nominal Coil Voltage - 24VDC
Must operate Voltage - 18.0 VDC
Must release Voltage - 2.4 VDC
Maximum Voltage - 35 VDC140529-3
Reed Relay SIP Dry SPST NO Contacts 1750 ohm coil
Note:Outer pins are the contacts, inner pins are 1750 ohm coil.
Alternates: 62F4042, W117SIP-5, JWS-117-5, HE3621A2400, 3-1393771-5
https://www.masterelectronics.com/datasheet/741a2.aspx?p=45172003
Learn More - DATRON - 93GB61-4-BA-5.5K - Relay, Double Pole, Electrically Held, DPDT, 110 VDC Coil, Contacts 10Amps, 24 VDCSpecial Price $78.98 Regular Price $160.00
DATRON - 93GB61-4-BA-5.5K - High Performance Relay
Military - Aerospace Relay
Hermetically Sealed
High Shock and Vibration Rating
Shock Resistance: 100 G's, 6+/-1mS
Coil: 110 VDC, 5500 Ohms
Contacts: 10 Amps, 28VDC
Contact Material: Silver Cadmium Oxide
Operating Temperature: -65 C to 125 C
Mechanical Life Expectancy: 1,000,000 Cycles
Connections: Solder Terminals
Overall Dimensions: Height 1.25" X Length 1.765" X Width 0.530"
Bailey Control P/N 1946286A6
New Old Stock
.
Learn More - U.S.R.C. - 95-281 - 115VAC DPDT-10A Herm-sealed RelaySpecial Price $79.98 Regular Price $129.50
US Relay CO. - U.S.R.C. - 95-281 - Hermetically Sealed Metal Can
DPDT-10Amp at 115VAC/29VDC 115VAC
1350-Ohm Coil
8-pin Round Connector ( Not Octal ) plug-in And Screw down lock - 1.4 x 1.5 x 3"H
Unused but been around since the Cold War (Manf. Date 1957)
New Old Stock,
Weight 0.37 pounds
- MAGNECRAFT/S&D - 788XBXCM4L - Relay 120VAC Coil, 120VAC DPDT-12A and Press-to-TestREADY TO SHIP - ONLY 25 LEFT IN STOCK!
MAGNECRAFT/S&D - 788XBXCM4L - Relay, 120VAC.
Status: Discontinued
RELAY ICE CUBE
Contacts: DPDT-12A and Press-to-Test.
With Indicating LED.
Mech: Plug-in.
Learn More - TE Connectivity AGASTAT/AMERACE - EGPD002 - 1423176-6 - 125VDC 4PDT 15Amp, Time Delay/Timing Relay, Removed from Equipment
TE Connectivity AGASTAT/AMERACE - EGPD002 Nuclear Qualified Time delay / Timing Relay
125VDC 4PDT 15Amp
1.75"Sq X 4.5"H W 3/16"(M)
Faston Conn MANUF P/N OR EQUAL - SAFETY DEVICE / NUCLEAR POWER PLANT RELAYS
Alternate: TE Connectivity 1423176-6
Note: Used /Removed from equipment
Retails new for 0ver $1000.
- RBM CONTROLS - 91252-1667 - Relay, control, motor start. SPST 3Amp 115VAC. (1/12HP motor start).Special Price $6.98 Regular Price $9.50Out of stock
RBM CONTROLS - 91252-1667 Relay, control, motor start.
Contacts: SPST.
Contact Ratings: 3Amp.
Coil Voltage: 115VAC (1/12HP motor start at 60 Cycle).
Connections: screw (3). Mech Mtg: Panel.
Note: This relay is specifically intended to connect a starting capacitor to a split phase motor starting winding until the current drawn by the run winding drops below the current threshold of a typical 1/12 HP AC motor (120 VAC). As the motor approaches operating speed, the current drawn by the run winding drops less than an amp. Bulk.
Learn More - ELECTRONIC CORPORATION AMERICA ECA - NO. 8-591 - Solid State Low Leakage Relay, 0-30MA, 0-120V, AC OR DCSpecial Price $19.98 Regular Price $24.50
ELECTRONIC CORPORATION AMERICA, ECA - NO. 8-591
Solid State Low Leakage Relay 0-30MA,
0-120V, AC OR DC
Note: For Use with Type 42MTB Photoswitch Terminal Bases
NSN: 5945-01-232-5447
Alternate: CA0509-005
New Old Stock
Proudly Made in USA
Learn More - ALLEN BRADLEY - AB - 809S-BB100A1-A - AC Current Relay Adjustable 1-12Amps 120V60HzSpecial Price $89.98 Regular Price $150.00
ALLEN BRADLEY - AB - 809S-BB100A1-A AC Current Relay.
Status: Discontinued
Solid State Undercurrent
Trip Current Range Adjustable from 1.0 to 12 AC Amperes.
Supply and Inhibit Voltage: 120V 60Hz.
Maximum continuous current 18Amps AC.
Automatic Reset, Adjustable Differential, Adj Trip Current, Adj Time Delay from s/d pots on top of device.
Use Directly or with Current Transformer. 2 lbs.
Learn More - AUTOMATIC ELECTRIC - 280R66K - Relay, telephone. Special purpose, very sensitive.Special Price $36.98 Regular Price $48.50
AUTOMATIC ELECTRIC - 280R66K - Relay, Telephone.
Special Purpose, Very Sensitive.
Enclosed. 4-7/8" Long x 1-11/16" Wide x 1-1/2" high.
Note: Inside Marked 280 R, 66K.
Vintage Automatic Electric - New Old Stock
Learn More - WILKERSON INSTRUMENT CO - MM4300 - Transmitter, DC Isolated, Mighty Module Transmitter, 0-10VDC-to-4-20mASpecial Price $229.98 Regular Price $325.00
WILKERSON INSTRUMENT CO - MM4300 - Transmitter, Mighty Module Transmitter.
The MM4300 provides a DC output, fully isolated from input, line power and ground, proportional to a DC input. It is useful in eliminating ground loops and common mode signals.
DC Isolated
0-10VDC input to 4-20mA Output.
AC Supply: 115VAC, Pug-in Octal (8) pins.
Plastic Enclosure.
Learn More - Western Electric - 316M - Relay, Telephone/Teletype.Special Price $34.98 Regular Price $45.00
Western Electric - 316M - Relay, Telephone/Teletype.
Package: can 1.7" square x 3.9" high, including 11 contacts and handle.
Note: Marked "Under High Pressure - Do Not Open".
Boxes are marked 100993799 316M 6-74 571.
Genuine Vintage Western Electric - New older stock.
Learn More - Unidentified MFG - UNI9-7 - 12VDC - Starter Solenoid Relay Assembly.
UNI9-7 - Universal Starter Starter Solenoid Relay Assembly, 3-Terminal.
Coil Voltage: 12VDC
SPST Normally Open Contact
Coil Resistance: 4 ohms,
Coil Current: 3 Amps, Momentary Duty.
Two Large Copper Contactor Terminals: 5/16-24,
Single Coil Terminal: 10/32
Grounded Case/Base.
Heavy Duty
One side of coil internally connected to integral mounting bracket, very high resemblance to those used in Ford Automobiles, Trucks, Tractors, and/or Marine. Replacement Solenoid for Oliver Tractors, Indust/Construction, International Harvester, & Allis Chamers applications.
Learn More - TURCK - MS25-10 - Multisafe Rotational Speed Monitor 115VAC Used.Special Price $224.98 Regular Price $425.00
TURCK - MS25-10 - Multisafe Rotational Speed Monitor 115VAC.
OUTPUT PULSE 4--20mA 0-10VDC
Status: Discontinued
Dimensions: 5" x 3" x 2.25"
Made in Germany
Used / Removed from Equipment.
Learn More - KUHNKE - 130-2-01-2-10 - Timing Relay, 110VAC, Plug-in 11pin, 0.2 - 10 Seconds.Special Price $89.98 Regular Price $150.00
KUHNKE - 130-2-01-2-10 - Timing Relay, 11 pin Plug-In relay.
Kuhnke manufactured relays since 1948; during 2004 the relay division was sold. The range was extensive; Kuhnke relays can still be found in medical, railway, power generating applications as well as industries such as printing, textiles and machine automation.
Kuhnke Series 130 Timing Relay
Type: Pull-in Delay.
Adjustable "0-10" or 0.2 to 10 Seconds.
Red LED Indicator.
New. - Kuhnke Austria
- E. Dold & Sohne KG - AI937 - Relay, Time. 45 - 110Hz 110V 50/60Hz.Special Price $129.98 Regular Price $185.00
E. Dold & Sohne KG - AI937 - Relay, Time.
Contact Ratings: 3Amp.
Mech Mtg: Din Rail.
Note: Input: 110VAC 50/60Hz.
Adjustable frequency 45-110Hz.
Contact Rating:
- 24 VAC, 3 A , 2.5 A
- 110 VAC, 3 A , 2.5 A
- 220 VAC, 3 A , 2.5 A
Dimensions: 45 X 127 X 77mm
Weight: 0.3 KgFactory New
Learn More - EATON -CUTLER-HAMMER - D50ER14 - Expander 14 I/O 24VDC relay.Special Price $69.98 Regular Price $120.00
EATON - CUTLER-HAMMER - D50ER14 Expander 14 I/O 24VDC relay.
The Cutler Hammer D50 Series PLC Programmable Logic Control can be used for many different applications. The D50 PLC can also be a standalone controller that contains a Central Processing Unit (CPU) power supply, and input/output circuitry with terminals. No battery backup is needed for the 2K memory controller, and there is plenty of programming capacity for complex control schemes. The large number of timers/ counters relays, and data registers allow you to maintain the smallest PLC size PLC possible when you must upgrade to larger more expensive systems.
Status: Discontinued
Programmable Logic Controller (PLC)
D50 Series Module 14 I/O EXP Relay Output
I/O Module, 14 Point, 24 VDC
UPC: 78211400072
Alternates: D50ERI4, D50ERL4, D5OER14, D5OERI4, D5OERL4, DS0ER14, DS0ERI4, DS0ERL4, DSOER14, DSOERI4, DSOERL4
New
Learn More - HI G - M39016/18-30L - MGAPD-26 A or B - Micro Miniature Relay, DPDT 26.5VDC, NewSpecial Price $48.98 Regular Price $86.50
HI G - M39016/18-30L - MGAPD-26 A or B - Micro Miniature Relay
Contact Material: Gold, Metal
Mount: Through Hole
Coil Current: 16.99 mA
Coil Resistance: 1.56 kΩ (1560 Ohm)
Coil Voltage (DC): 26.5 V
Operating Temperature: -65 C to 125 °C
Max Voltage Rating (AC): 115 V
Max Voltage Rating (DC): 28 V
Throw Configuration: DPDT
RoHS: Compliant
Alternate: MGAPD -26 A or B
CECC Designation: 16207-801-GBA 1Y-E3. 16207-801-GBA 1Y-rE5
Learn More - Teledyne - M39016/18-036P - Micro Miniature Relay, DPDT 26.5VDC, Gold Plated Can base 7 Pins, Used/RFESpecial Price $38.98 Regular Price $68.50
Teledyne - M39016/18-036P - Micro Miniature Relay
Contact Material: Gold, Metal
Mount: Through Hole
Coil Current: 16.99 mA
Coil Resistance: 1.56 kΩ
Coil Voltage (DC): 26.5 V
Contact Current: 1 A
Operating Temperature: -65 C to 125 °C
Max Voltage Rating (AC): 115 V
Max Voltage Rating (DC): 28 V
Throw Configuration: DPDT
RoHS: Compliant
Alternate: J114D-26P
Learn More