Proximity Switch

Cutler-Hammer Opcon / Eaton - 9501AS-2005C1 - 108126-008 - 7872001300 - Photoelectric Sensor Control

Photoelectric sensors use light to detect the presence or absence of an object. The main advantages of photoelectric sensors are noncontact sensing of objects and greatly extended sensing ranges.

AGV Sensors – The eyes and ears of mobile robots

Proximity Sensor (Near T0 20-Inches)

WIDE-BEAM 20-32VDC

Open Collector NPN 

Input Voltage: 20-32 VDC

Response Time: 30 mS

Current Sinking

W/ 30" CABLE & 4-Pin MS3106F14S-10S Conn (Removeable)

Detects Light & Dark objects easily

By-OPCON Full Spex with Each Sensor

NEW IN A WHITE NEMA 1 - 4 ENCLOSURE

Overall Dimensions: 4.625" Long, 2.00" Wide, 2.75" Depth

Cable Length: 30"

Operating Temperature: -40 to 140F (-40 C to 60C)

Nema: 1,4

EATON and CUTLER-HAMMER

UPC 1072113905448, 72-1139-0646

Made in USA

New Old Stock in Manufacturer's Packaging

Learn More

TURCK - Bi15-CP40-AN6X2 - Inductive Switch, Proximity.

10-30VDC 200mA 15mm.

3-Wire DC NPN

Ident Nr.: 16220

NIB.

Note: "Combiprox.

Learn More

Proximity switch. Metal 115VAC 3#18 SJO power cord PNEU CYL 50/60 HZ 0.5AMP Learn More

NAMCO CONTROLS DANAHER - EE520-65510 - Proximity Switch.

Dual Sensing - Industive Proximity

115VAC 0.005Amp - 5Amp, Continuous 2Amp Inrush

4 Conductor Power Cord SCP.

Short Circuit Protection

New Old Stock

Made in USA

Learn More

Promiximity switch 115VAC 50/60HZ 0.5A Cyl Probe 1.295" metal.

Learn More

Switch, proximity, limit. Contacts: NO or NC in One DPST switch. Contact Ratings: 0.005-0.5Amp Cont 120VAC 50-/60Hz, 1Amp Inrush/2mA leakage. Mech: Panel. Note: Listed: UL/CSA. Has dual built in Led(s). This proximity switch is w/o the sensing head. NIB with wiring diagram. Learn More

NAMCO CONTROLS - EE520-41520 - Switch, Proximity Cylindicator.

Namco is a leader in electro-mechanical and non-contact switching devices for industry, aerospace, defense, marine and nuclear power applications. The product line includes arguably the world's most rugged limit switches for the toughest of environments. For over 25 years, the Cylindicator sensor has been the standard for industrial applications that require end‑of‑stroke indication on Hydraulic and Pneumatic Cylinders.

115VAC 0.5Amp, 1.295" Metal Probe.

Supply Voltage: 95-135.

End Sensing

Cylindicator.

PSI: 300.

Alternate: DANAHER CONTROLS EE520-41520

New Old Stock

UL Listed

Note: Namco, Snap-Lock, Mill-Pack, Hard-Coat, or Dura-Prox, all of which are trade names of NAMCO - a division of Specialty Product Technologies.

Proudly Made in the USA.

Learn More

NAMCO CONTROLS - EE230-30421 Rotatable Cylindicator Proximity Switch.

Weld Field and Electrical Noise Immunity

3000 PSI Pressure Rating

Standard Latching Short Circuit Protection

Predictable, Consistent Electrical Performance

100% Tested and Burned-in

Purpose-Designed Housings and Materials

Internally Short Circuit Protected

1.0" Plastic Probe

20-140VAC/VDC 0.5A Continuous . - 3Amp inrush.

1.7mA Leakage Current Off State

8 foot 2 Conductor 18AWG SJO Power Cord.

Ready & SCP LED Indicators 

Replacement for EE220-30421.

New Old Stock

Note: Snap-Lock, Mill-Pack, Hard-Coat, and Dura-Prox are all trade names of NAMCO - Specialty Product Technologies. 

Proudly Made in USA

Learn More

NAMCO CONTROLS - EP150-54200 - Amplifier Control Modules

12-24vdc or 20 vac Enclosed Amplifier Control Modules.

NPN transistor output 100mA max.

Includes 16 pin socket with solder leads

Factory New

Learn More

NAMCO CONTROLS - EE520-30422 - Switch, Proximity, Cylindicator Series.

Hydraulic Cylinder

Plastic Probe

115VAC 50/60Hz 0.5Amp.

Pressure: 3000 PSI

18mm Mounting Kit

New

Proudly Made in USA

Learn More

NAMCO CONTROLS - EE517-42420 – Cylindicator Probe Proximity Switch,10-30VDC IN 100MA OUT For over 25 years, the Cylindicator sensor has been the standard for industrial applications that require end-of-stroke indication on Hydraulic and Pneumatic Cylinders Probe: 1.025” Input: 10-30VDC Output: 100mA Max. Short Circuit Protected Note: Probe must be installed in cylinder endcap Mount to Metal Surface to provide Ground Connection, Made in USA New Old Stock Learn More

Namco Long Proximity Switch, 18 MM 3 Pin Plug-in, Sensing Ranges  .315" un-shielded, .160" shielded. Supply voltage 95- 140 VAC, On State voltage drop 10 V, AC 120VAC 50/60HZ 0.5AMP. -20 - +790C Operating range, Repeatability  .001", Switching differental 10%, Overall Length 4.002".In rush Current  3 Amp. Short circuit protection, Power-up time 150mS. Factory packaged with 18 MM Mounting Kit and Data/Specification Sheet.

Learn More

Pneumatic cylindicator proximity switch, 115VAC 50/60Hz 0.5Amp. Sensing distance: approximately 0.100" +/- 0.005". Probe 2.950". Material: plastic. Listed: UL. Learn More

DC CYLINDICATOR MAX PRESSURE 1500 PSI Learn More

Switch, proximity limit. Contact Ratings: NO 120VAC 50/60Hz 0.005-0.5Amp cont. 2Amp inrush/2mA leakage. Mech: panel, plug-in. Note: Power Block, without head. NIB, with manufactures instructions. Learn More

ELECTRO - 724868 - 9-196 - Magnetic Sensor, Tubular

With 2-Conductor Cable

New Old Stock 

Learn More

SKAN-A-MATIC - S28002 - Photoelectric, Sensor / Wafer PhotoDetector Sensor. New

The S28 series skanner is a specially constructed LED Sensor designed to detect wafers for the semiconductor industry. polished and unpolished wafers can be detected from the same sensing point.

Operating Voltage: 30 VDC Max.

Spectra Response: 910 nm peak, filtered to respond to less than 5% at 750 nm and less than 0.1% at 700nm.

4 Conductor, 26 GA, Teflon Covered Cable with shielded photodetector leads and overall shield.

LED Skanner

Operating Distance 0.050".

Bottom Mounted Cable.

Note: LED must be current limited, 40mA max which will result in a forward voltage drop of 1.0-1.6VDC.

New Old Stock in Manufacturer's Packaging

Learn More

SICK OPTIC ELECTRONIC - WT12-N1421 – Photoelectric Proximity Switch, New The SICK WT12-N1421 (Part No. 1010807) is a photoelectric proximity sensor designed for non-contact object detection. As part of the SICK W12 series, it features a rugged metal housing suitable for demanding industrial environments. Core Specifications • Sensing Range: Adjustable from 35 mm to 100 mm. • Output Type: NPN digital output. • Supply Voltage: 10 V DC to 30 V DC. • Output Current: Maximum of 100 mA. • Connection: Pre-wired with a 4-wire cable, typically 1.5 to 2 meters in length. • Adjustment: Features a manual potentiometer for fine-tuning the sensing distance. Physical & Environmental • Housing Material: Durable zinc die-cast metal. • Dimensions: Approximately 15 mm x 49 mm x 41.5 mm (standard W12 rectangular form factor). • Protection Rating: Often rated up to IP69K, providing high resistance to water and dust. • Operating Temperature: Reliable performance from –40 °C to +60 °C. This sensor is commonly used in packaging, automotive, and logistics applications due to its ability to handle optical interference and harsh physical conditions. Factory New Learn More

SICK OPTIC ELECTRONIC - WT12-P4471 – 1011058 - Photoelectric Proximity Switch, New. The SICK WT12-P4471 (Part No. 1011058) is a discontinued photoelectric proximity sensor. It is specifically designed as a proximity switch with foreground blanking, allowing it to detect objects within a set range while ignoring those closer to the sensor. Status: Discontinued Key Specifications • Functional Principle: Photoelectric proximity sensor with foreground blanking. • Sensing Range: Up to 100mm. • Output Type: PNP. • Switching Mode: Light/dark switching. • Supply Voltage: 10V DC to 30V DC. • Current Rating: 100 mA maximum. • Connection Type: Male connector M12, 4-pin. • Enclosure Rating: IP67 (dust-tight and protected against water immersion). Additional Information: https://www.sick.com/media/productoverview/5/65/765/productoverview_W12_g555765_en.pdf Factory New Learn More

SICK OPTIC ELECTRONIC - WT12-N1421 – Photoelectric Proximity Switch, New The SICK WT12-N1421 (Part No. 1010807) is a photoelectric proximity sensor designed for non-contact object detection. As part of the SICK W12 series, it features a rugged metal housing suitable for demanding industrial environments. Core Specifications • Sensing Range: Adjustable from 35 mm to 100 mm. • Output Type: NPN digital output. • Supply Voltage: 10 V DC to 30 V DC. • Output Current: Maximum of 100 mA. • Connection: Pre-wired with a 4-wire cable, typically 1.5 to 2 meters in length. • Adjustment: Features a manual potentiometer for fine-tuning the sensing distance. Physical & Environmental • Housing Material: Durable zinc die-cast metal. • Dimensions: Approximately 15 mm x 49 mm x 41.5 mm (standard W12 rectangular form factor). • Protection Rating: Often rated up to IP69K, providing high resistance to water and dust. • Operating Temperature: Reliable performance from –40 °C to +60 °C. This sensor is commonly used in packaging, automotive, and logistics applications due to its ability to handle optical interference and harsh physical conditions. Factory New Learn More

Pneumatic cylindicator proximity switch, 115VAC 50/60Hz 0.5Amp. Sensing distance: approximately 0.100" +/- 0.005". Probe 2.950". Material: plastic. Listed: UL.

Learn More

Pneumatic cylindicator proximity switch, 115VAC 50/60Hz 0.5Amp. Sensing distance: approximately 0.100" +/- 0.005". Probe 2.950". Material: plastic. Listed: UL. Learn More

Namco Controls - EE510-53400 - Switch, Proximity.

10-30VDC 100mA.

With LED "Power-On" Indicator.

Max sensing range: 1/2".

Recom sensing range: 1/4".

1/2 - 14 NPSC connection

New.

Prroudly Made in USA

Learn More

TUBULAR PROXIMITY 10-30VDC 100MA RF INDUCTIVE NON CONTACT SWITCH

Learn More