Illuminated Switch

Switch, P/B. Contacts: 2P. Actuator: illuminated, green lens 7/8" D. Note: Switch assembly. Lamp not included.

Learn More

Switch, bank. Contacts: 3 position each DPDT. Actuator: PO, PO Illuminated. Mech: 2.43"W x 0.75"H x 3.14" Deep. Note: 2-Momentary and 1-Latching. All 3 DPDT Switches have sockets for up to (4) T1-3/4 Lamps (Seven #367 28V lamps included ) and are front panel removable. Legends are pre-printed for a gov't radio installation.

Learn More

Switch, pushbutton. Contacts: SPDT. Contact Ratings: 1Amp 125VAC. Actuator: Illuminated (No lamp). Connection: PC Pins. Mech: PCB. Body: 15.1mm long x 10.0mm wide x 17.0mm high plus actuator. Note: Unsealed OI-PB Switch. No actuator/No lamp. Series MML2. Listed: UL/CSA. Learn More

Switch, pushbutton. Contacts: SPDT. Contact Ratings: 5Amp 250VAC (300VAC). Actuator: illuminated, red. Momentary 1NO/1NC. Mech: Panel mount for hole 0.795" D with 2 screws at 0.98" centers. Body: overall 1.384" D x 1.061" in front of panel. Note: Silver frame around red plunger. Lamp 60V 1.2 watt. Listed UL/CSA. Swiss made. More info: http://www.eao.com/eus/en/products/condensedcatalogue/byseries//series_14.pdf Learn More

Switch, illuminated. Base only for P/B switches. 1 NO and 1 NC. No lens cap. Will accept lens cap 1/4" ID and lamp T1-3/4. Complete with hardware, washers, one locating ring plus one dress nut. More info: http://www.dialight.com/Assets/Brochures_And_Catalogs/Indication/513-xx06-xxx.pdf Learn More

ALLEN BRADLEY - AB - 800MS-Q24 - Green Pilot Light, 24 VAC/DC.

1.2" Square Face Green Pilot Light is 3/4"wide x 1/2"high

24VAC/DC Lamp#28MB telephone wedge lamp included -

Square pilot light with "IN POS" OR "FAULT" or "HOME"

Name Plates above Green indicator lens.

Mounts in 7/8" dia hole. (22.5mm) 

Learn More

Switch, pushbutton. Contacts: SPDT. Actuator: Momentary. Illuminated. Note: Lens cover: frosted white. No lamp. Label 3-21-300-101. Learn More

Switch, illuminated rocker. Contacts: SPDT. Contact Ratings: 12-24VAC/DC. Actuator: On-Off. Illumination: Blue. Connection: 3, 1/4" quick connect terminals. Mech: snap-in panel mount. Body: 23.3mm wide x 26.8mm deep, 30.5mm behind panel. Note: Silver bezel. Note: Series 50. Learn More

Switch, illuminated pushbutton. SPDT momentary. Silver contact rating 5A at 125VAC. Illumination: LED, green. Illumination voltage (nominal) 2.25VDC. Panel mount, snap-in 0.638"square for panel thickness .039" to .126". Learn More

Switch, illuminated pushbutton. Contacts: SPDT. Actuator: Latching. Mech: Panel mount snap-in, metal housing. Body: 33.2mm wide x 21.7mm high. Note: Legend is marked MAINT WORK. Housing is marked 2C10. Learn More

For a 60V Illuminted P/B Switch, Bezel/socket only, no lamp, no switch top.Awaiting lamp & Top & Contacts. Everything else is there but the electricity.Switch Function Type:Maintained, Voltage, Contact AC Max:250V , Contact DC Max:250V, Max Contact Current AC:5A, Terminal Type:Solder,Approval Bodies:VDE, UL, CSA, SEV, Behind Panel Depth:48mm,RoHS Yes Learn More

Switch, rocker type. Contacts: SPDT. Actuator: 3 Position, center off, one side momentary. Illuminated. Connection: male 0.25" QC terminals. Mech: Panel, snap-in. Note: Military switch base, no actuator. Cutler Hammer / Eaton. Learn More

Switch, illuminated rocker. Contacts: DPDT. Contact Ratings: 125VAC/5Amp. Actuator: Momentary, On (On). Mech: snap-in. Note: Lens: red, with hidden T1-3/4 Bi-pin 5V or 6V lamp. Learn More

Switch, illuminated pushbutton. Contacts: SPDT. Contact Ratings: 0.4VA. Actuator, P/B latching. Illumination: Green LED on side. Connection: PCB terminals, gold plated. Mech: Snap-in. Panel hole: 0.5 x 0.75" hole. Weight: 0.2 oz. Note: Push On / Push Off - snap actuating. Package of 2. (Note: Outer bezel dimensions: 0.779" (19.7mm) long x 0.620" (15.7mm) wide x 7.1mm high including actuator). Learn More

Switch, pushbutton. Actuator only. For illuminated switches. Various colors.

Learn More

Switch, illuminated. Snap on switch top for T1-3/4 lamps. Color: white. Marked WBC.

Learn More

Switch, top. For illuminated switches (Actuator only). Snap-in. Dimensions: 18.5mm square x 11.2mm high. Wit set into switch with a square hole 12.6mm and 3.5mm deep. Has two snap in tabs below inset area. Learn More

Switch, pushbutton. Contacts: SPDT. Actuator: Illuminated (Red), Momentary. Connection: solder lugs. Mech: Panel, snap-in. Body: Rectangular. Snap-in panel = 1.650" to 1.700" long x 0.858" wide x 1.709" deep (behind panel). Front bezel 1.695" long x 0.938" wide. Learn More

Switch, pushbutton. Contacts: DPDT. Contact Ratings: 10.1Amp 125VAC (125-250VAC). Actuator: illuminated, Push On / Push off. Connection: male 0.187" QC terminals or solder. Mech: Panel, snap in. Body: 1.06" x 0.846" x 1.507" behind panel, plus connections. Front flange is 1.107" long x 0.926" wide. Note: Lamp. Learn More

Switch, push-pull slide. Contacts: Two position. Actuator: Illuminated. Lamp Voltage: 28V. Connection: PC Pins. Mech: PCB. Note: Ultra red glow. Two way action meaning there are two axis it can be activated from. Dimensions: 0.903" long plus actuator x 0.939" wide x 0.4" high plus slide and tab (0.28" high). Package of 3.

Learn More

Switch, pushbutton. Contacts: NO. Actuator: Illuminated. Mech: Panel, threaded bushing. Panel hole: 0.557" D x 1.474" deep, plus terminals - behind panel. Note: White lens. Learn More

Switch, illuminated. 4PDT momentary. Lens: clear. Dimensions: 1" square x 1-9/16" deep. Mount: panel/chassis. Termination: solder contacts. Note: without lamps. Learn More

Switch, push. DPDT latching and locking, sealed power switch with green LED, on a metal bracket.

Learn More

ILLUMINATED MOM STOP SW 10 AMP , 1 NO, 1 NC,SCHLEGEL TYPE ETLR, 300V STANDARD DUTY Learn More