Pushbutton Switch

Genuine ITT Schadow Switch, pushbutton. Contacts: SPDT Push-on - Push-off. Contact Ratings: 5Amp 250VAC. Actuator: latching. Connection: solder terminals. Mech: panel. Body: Extends 1.83" behind panel x 0.58" wide, 0.94" with bracket. Panel hole: Two threaded mounting holes on bottom, two more holes in front about 0.72" centers. Note: Alternate Action . Knob included.

Learn More

Switch, pushbutton. 5V 10mA NO momentary, 35gram-force. Mount: PCB RA. Dimensions: 5mm square. Package of 10. Learn More

Switch, pushbutton. 5V 10mA NO momentary, 35gram-force. Mount: PCB RA. Dimensions: 5mm square. Package of 10. Learn More

Switch, P/B. Contacts: 2P. Actuator: illuminated, green lens 7/8" D. Note: Switch assembly. Lamp not included.

Learn More

Switch, pushbutton. Contacts: SPDT. Contact Ratings: 0.4VA 125VAC. Actuator: On-Mom. Connection: PC leads. Mech: PCB RA. Body: 12.9mm long x 6.8mm wide x 10.6mm high . Note: Miniature, sealed contacts. Bushing: 7.3mm long. Actuator: 5.7mm long. Learn More

Switch, micro push-button. Contacts: SPST NO. Contact Ratings: 0.2VA 50VDC 1-10mA -40-to-+125C. Actuator: 300gram [3 Newton] Actuation force. Travel 0.25mm. Mech: SMT gull-wing, gold contacts. Body: 4.6 x 2.8mm. Note: LFG SS MASSE. Micro-miniature tactile switch surface mounting. Rohs compliant. Package of 100. Learn More

Switch, micro P/B. Contacts: SPST NO. Contact Ratings: 125/250VAC 15Amp. 3/4 HP, 125VAC, 1 1/2 HP 250VAC: 1.8" x 0.6" x 0.6" less QC terminals and push button - one 1/4"QC at the end of each switch. Note: Color: brown or black . Alernate Part Numbers WD21X557 as used in numerous applicances as interlock door switches. Replaces AP3994765, 1263984, AH1481922, PS1481922, WD21X0557, WD21X557, and B00MNMS81Q. Save Big $$ and repair those appliances yourself.

Learn More

Switch, pushbutton, snap. Actuator: NO. Mech: Less than 1/2" per side x 0.29" high. Note: Miniature. With tactile feedback. Keyboard type. Manufactured by: TRW / DAUT-RIETZ. Package of 20. Learn More

Switch, bank. Contacts: 3 position each DPDT. Actuator: PO, PO Illuminated. Mech: 2.43"W x 0.75"H x 3.14" Deep. Note: 2-Momentary and 1-Latching. All 3 DPDT Switches have sockets for up to (4) T1-3/4 Lamps (Seven #367 28V lamps included ) and are front panel removable. Legends are pre-printed for a gov't radio installation.

Learn More

Momentary Professional Input Switch, pushbutton. Contacts: SPDT. Contact Ratings: 24V 10mA 240mw. Mech: PCB 4 pin, 0.488" (12.4mm) wide x 0.683" (17.3mm) long. Body below knob: 0.283" (7.2mm). Knob is actually 0.685" (17.4mm) square. Note: Digitast keyboard switch. Color: black.

Learn More

Switch, pushbutton. DPST push on/push off, latching, 10Amp 250VAC. Mount with 20 holes 20mm apart. Contacts: (4) 1/4" male quick connect terminals. Learn More

Switch, pushbutton. Contacts: NO without actuator, makes for unlimited possibilities. Contact Ratings: 10uA 2VDC / 5mA 12VDc. Mech: PCB. Body: 8mm square x 3mm thick, only 1mm travel. 4Leads. Black body, silver self-cleaning membrane. Note: Tactile, snap-action, micro. Digital logic. Low contact resistance of 200milliohm, only 10mSec bounce. Package of 10.

Learn More

Switch, pushbutton. Contact Ratings: 100mA 5V. Actuator: NO. Mech: Very low profile 0.49" square x 0.225" high . Pkg of 20. Note: Keyboard/tactile feedback switch. Color: black. Yellow LED. Learn More

Switch, pushbutton. Contact Ratings: 100mA 5V. Actuator: NO. Mech: Very low profile 0.49" square x 0.225" high. Note: Keyboard/tactile feedback switch. Color: black. No LED. Package of 20.

Learn More

Switch, pushbutton. Contacts: DPST. Actuator: Push on/Push off (Latching). Connection: PCB terminals or solder. Mech: PCB. Body: 9.1mm x 9.6mm square x 10.8mm high which includes the plastic body and the 5.4mm square x 2.3mm high plastic collar. Knob: 10.6 mm high x 8.7mm D red pushbutton. There is a spacing of 3.3mm between top of collar and bottom of pushbutton. Note: Keyboard switch, each with round red knobs.

Learn More

Switch, pushbutton. Contacts: NO. Contact Ratings: 0.1VA. Mech: PCB. Body: 6mm square (0.245") x 3.4mm (0.135") high. Contact leads are 4.15mm or 0.163" apart. Note: Tactile switch. Learn More

Switch, pushbutton. Contacts: SPDT. Contact Ratings: 1Amp 125VAC. Actuator: Illuminated (No lamp). Connection: PC Pins. Mech: PCB. Body: 15.1mm long x 10.0mm wide x 17.0mm high plus actuator. Note: Unsealed OI-PB Switch. No actuator/No lamp. Series MML2. Listed: UL/CSA. Learn More

Switch, push-button. NO Keyboard, round, spring-loaded momentary. Snaps into a 0.61" / 15.4mm dia hole, stays secure with two pop out flanges. 1.15" / 29mm long from tip of "x" plunger to two pins. Appears to be silver plated contacts inside. No tops. Package of 20. Learn More

Switch, pushbutton, heater control. Contact Ratings: 17Amp 120-240VAC, 1-1/8HP 120VAC, 2HP-240VAC. Actuator: Off / Low / High. Connection: 3 male 1/4" quick connect terminals. Mech: Panel mount with 1.6" centers. Body: 2.002" long x 1.196" wide x 1.189" high. Note: All cancelling. Made in the USA. Learn More

Switch, pushbutton. Contacts: SPDT. Contact Ratings: 5Amp 250VAC (300VAC). Actuator: illuminated, red. Momentary 1NO/1NC. Mech: Panel mount for hole 0.795" D with 2 screws at 0.98" centers. Body: overall 1.384" D x 1.061" in front of panel. Note: Silver frame around red plunger. Lamp 60V 1.2 watt. Listed UL/CSA. Swiss made. More info: http://www.eao.com/eus/en/products/condensedcatalogue/byseries//series_14.pdf Learn More

Switch, illuminated. Base only for P/B switches. 1 NO and 1 NC. No lens cap. Will accept lens cap 1/4" ID and lamp T1-3/4. Complete with hardware, washers, one locating ring plus one dress nut. More info: http://www.dialight.com/Assets/Brochures_And_Catalogs/Indication/513-xx06-xxx.pdf Learn More

Switch, push on, push off. 6Amp 120V latching canopy switch. Button: red and threaded bushing. Mount: 3/8" hole, thread size on the collar is 3/8-24. Case: Body is 8.7mm tall x 20.1mm wide x 23.1mm deep with 24" leads. Overall switch is 28.5mm high. No mounting nuts. Package of 5.

Learn More

Switch, pushbutton. Contacts: 4PDT non-latching momentary. Actuator: p/b 7/16" long x 1/8" square � no knob. Dimensions: 1" long x 5/16" wide x 9/16"high which includes the 3/16" long pc or solder leads. ALPS/Samwon Electric PN421. Package of 10. Learn More

Switch, pushbutton. 1NC, 1NO, momentary selector switch. Package: square. Marked Reader / Forwarrd. Series A. Learn More