Toggle Switch

Cutler-Hammer / Eaton - 8282K13 Switch, Toggle.

Contacts: SPDT. Full Size

Contact Ratings: 3Amp 125VAC/1Amp 250VAC.

Connection: Solder Terminals.

Switch Circuit: On - None - On

Mech: One hole threaded bushing mount/panel.

Body: 1.7" long x 0.518" wide x 0.53" high.

Note: Bushing length: 0.385".

Actuator length: 0.482".

New Old Stock - Bulk Packaged from Manufacturer

Made in USA

Learn More

CUTLER-HAMMER EATON - 7613K2 - Switch, Toggle.

Contacts: 3PDT.

Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2PH 125-480VAC, 1HP 3PH 125-600VAC).

Actuator: Center-off ( 3 Positions maintained).

Connection: Solder Terminals.

Mech: Panel.

Panel hole: 46.5mm long x 35.1mm wide x 21.3mm high.

Standard bushing 15/32".

Shaft 0.677" long.

Note: Heavy Duty, 1HP up to 3 Phase.

NSN 5930-00-862-4559

Complete with hardware.

Applications: For appliancews,instruments, small motor drive devices.

Genuine Cutler Hammer - New Old Stock

Learn More

Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: panel. Body: 1.321" long x 0.745" wide x 0.738" high. Standard 15/32" threaded bushing x 0.351" long. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC, 4.2AL 125VAC). Connection: screw. Mech: Panel. Panel hole: 1.135" long x 0.630" wide x 0.625" high. Standard 15/32" threaded bushing x 0.401" long (seated). Learn More

Cutler-Hammer Eaton - 7506K4 - Switch, Toggle.

The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications. It is available in solder lugs, screw, 0.25-inch spade terminals.

Contacts: SPST.

Contact Ratings: 10Amp 250VAC.

Actuator: On-None-On (Mom).

Connection: Screw.

Mech: Panel.

Panel hole: 1.134" long x 0.637" wide x 0.684" high.

Standard 15/32" threaded bushing x 0.519" long (seated).

Actuator: 0.565" long.

Note: Complete with hardware.

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp 125VAC/10A 250VAC, 3/4HP 250VAC. Actuator: center-off (On-None-On). Connection: 3 solder terminals. Mech: PCB / panel. Mount: 1 hole 0.469" D bushing. Body: 1.125" long x 0.624" wide. Note: Bushing length: 0.378" long. Shaft length: 0.632". Learn More

Switch, toggle. Contacts: SP. Contact Ratings: 15Amp 125/277VAC. Mech: For wall mount electrical boxes. Note: Quiet switch. Ivory. Back wired, grounding screw. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 125VAC 15A/250VAC 10A, 3/4HP 125-250VAC. Actuator: On/Off/(On). Connection: 3 screw terminals. Mech: Panel 15/32-32UNS-2A. Body: 1.330" long x 0.76" wide. Bushing length: 0.507". Actuator length: 0.675" long. Note: Listed: UL/CSA. Learn More

Switch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC). Actuator: On-None-On. Connection: PC terminals. Mech: PCB, vertical. Panel hole: 0.845" long x 0.500" wide. Note: Miniature. Non-threaded bushing. Learn More

C & K Components - 7101L1H3ZQE Switch, toggle.

Contacts: SPDT.

Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.

Actuator: On-None-On.

Connection: solder terminals.

Mech: PCB. Body: 12.8mm long x 6.8mm wide x 10.5mm high.

Threaded bushing 9.4mm long (seated).

Note: Miniature, long bat 16.1mm long, sealed contacts.

Learn More

C & K Components - 7411SHZBE Switch, toggle.

Contacts: 4P.

Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC).

Actuator: On-On-On.

Connection: Solder.

Mech: PCB, vertical.

Panel hole: 0.845" long x 0.500" wide.

Note: Miniature. Threaded bushing.

Complete with hardware.

Learn More

Switch, toggle. DP On-None-On 3A 120VAC, 2A 250VAC. Package: miniature PCB mount, RA 6 terminal, non-threaded shaft. Learn More

C & K Components - 7101SYCQE - Switch, Toggle.

Contacts: SPDT.

Operation: On-None-On

Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.

Contact Material: Silver, Gold Plated

Electrical Life: 1000K Cycles

Temperature: -30 C to 85 C

Actuator: On-None-On.

Bushing Size: 1/4-40

Connection: PC leads.terminal Seal: Sealed

Mech: PCB.

Housing: Stainless Steel

Body: 12.7mm long x 7.0mm wide x 10.4mm high.

Note: Miniature. Threaded bushing: 0.25" D x 8.9mm long.

Actuator: 10.5mm long.

Complete with hardware.

Alternate: TE Connectivity AMP 4-1825136-1

Learn More

C & K Components - T101HM9ABE Switch, toggle.

Contacts: SPDT.

Contact Ratings: 0.4VA.

Actuator: On-None-On.

Connection: PCB RA leads.

Mech: PCB.

Panel hole: 9.3mm long plus RA leads x 6.7mm deep x 12.5mm high.

Non-threaded bushing 6.8mm long.

Actuator 7.1mm long.

Learn More

ITT - Cannon - C & K Components - E107SYCQ Switch, Toggle.

Features/Benefits

Sealed Mini togggle switch against solder and cleaning process contaminants

UL 94V-0 Nylon case and bushing

Multi-positions

Contacts: SPDT.

Contact Ratings: 7.5Amp 125VAC or 28VDC, 3Amp 250VAC.

Actuator: On-Off-(Mom).

Connection: PC leads, sealed.

Mech: PCB.

Body: 0.505" long x 0.265" wide.

Threaded bushing.

Note: Miniature. Listed: UL/CSA.

Typical Applications
Telecommunications
Instrumentation
Medical equipment

MADE in USA

Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 115VAC. Actuator: On-On (Mom). Connection: solder. Mech: PCB. Body: 0.501" long x 0.452" wide x 0.435" high. Note: Miniature. Threaded bushing: 0.25" D x 0.376" long. Actuator: 0.40" long. Complete with hardware. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 230VAC max, 2Amp Res AC. Connection: PC RA mount, PC terminals. Body: 0.700" long plus contacts, bushing and actuator x 0.444" wide x 0.311" above board. Note: Non-threaded bushing: 0.242" long. Actuator: 0.430" long. Learn More

JBT - ST50L -  Switch, Toggle.

Contacts: DPST Normally Closed (NC).

Current: 15A @ 125 VAC

Current: 6.0A @250 VAC

Number of Positions: 3 

Actuator: On - None - (Off), Momentary - Off.

Connection: Screw Terminals.

Mech: Standard 15/32" Threaded Bushing.

Dimensions: Width: 0.75 in, Height: 2.2 in, Length: 1.32 in

Alternate: 5225S

Made in USA

Learn More

JBT Instruments - ST50R - Switch, Toggle.

Contacts: DPDT.

Rating: 20A @125VAC, 10@250VAC, 3/4HP @250VAC, 1/2HP@125VAC. 

Positions: 2 On/On

Actuator: On-On (Momentary).

Connection: 6 Screw Terminals.

Mech: Single Hole Mount/Bushing.

Body: 1.356" long x 0.750" wide x 0.973" deep plus Terminals.

Note: Threaded Bushing: 0.463" D x 0.463" long.

Actuator Length: 0.707" Long.

Genuine  J.B.T. Instruments - New Old Stock

Alternate: 5225S, 5228L

NSN 5930-00-050-2701

Proudly Made in the USA.

Learn More

ITT Mini Toggle Switch.

Contacts: DPDT.

Contact Ratings: 0.4VA, logic.

Actuator: On- Off - On.

Connection: Right Angle Gold PC leads.

Materials: Boby - Glass filled nylon, Housing - Stainless Steel,  

Body: 0.366" long plus contacts, bushing and actuator x 0.453" wide x 0.5" above board.

Note: Non-threaded bushing: 0.274" long. Actuator: 0.274" long.

electrical Life: 30,000 Cycles

Alternate: C&K T203MH9ABE

Miniature. New Old Stock

Proudly Made in USA

Learn More

Honeywell Microswitch - 1NT20-7N - Switch Toggle Panel Mount, ON OFF ON,  SPDT.

Honeywell MICRO SWITCH™ NT Series toggle switches meet the need for a rugged, cost-effective toggle switch.
Quality construction features include a seal between the toggle lever and bushing, and between the cover and case.
These switches are suitable for applications in many demanding outdoor environments, where the panels are subjected to vibration from equipment, temperature extremes, dust, splashing water, and/or hose directed water.

Status: Discontinued

Commercial Grade NT Series Switch, Toggle.

Type: Pull-to-Unlock Toggle Switch

Contacts: SPDT / 3 Position.

Contact Ratings: 10Amp 125V, 250V, 277VAC.

Horsepower: 0.5HP/125VAC, 1HP 250VAC, 277 VAC

Application: Weatherproof, NEMA 3, 3R, 4, 13

Actuator: Mon-Off-Mom.

Connection: Screw. #6-32

Mech: 15/32" X 0.47" Bock Leverushing. Toggle Length - 1.05"

Panel Cutout Dimensions: Circular - 12.40mm Diameter

Bushing Thread: 15/32-32

Ingress Protection: IP67/IP68 - Dust Tight, Waterproof

Note: Black Lever Lock. Locking Lever in the Center Position.

Approvals UL, CSA

Proudly Made in USA

 

Learn More

Honeywell/Microswitch - 8V1012B-M - Switch, Rocker.

Contacts: SPDT.

Contact Ratings: 25mA/20VDC.

Actuator: On-On.

Mech: PCB, with frame, 4 pin.

Note: Miniature.

New Old Stock

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 5Amp 125VAC, 2Amp 250VAC. Actuator: On-On. Elect config: Wirewrap leads. Mech: PCB. Body: 12.7mm long x 7.0mm wide x 10.3mm high. Note: Miniature. Threaded bushing: 6.3mm (0.25") D x 9.0mm. Actuator length: 9.5mm long. Learn More

Switch, toggle. SPST 2 position 6Amp 125VAC/3Amp 250VAC. Bushing length: 0.478" Actuator length: 0.546". Dimensions body: 1.133" long x 0.63" wide x 0.642" deep. Termination: screw. Learn More