Toggle Switch

Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 125VAC. Actuator: Center-off. Connection: solder. Mech: Panel. Body: 13.0mm long x 12.0mm wide x 13.6mm high plus contacts. Threaded bushing 12.0mm long. Actuator 12.0mm long . Note: Complete with hardware. Learn More

Switch, toggle. Contacts: DPDT. Contact Ratings: 15Amp 125VAC/10Amp 250VAC (3/4HP 250VAC). Actuator: On-Off. Connection: screw terminals. Mech: Panel, one hole. Body: 1.331" long x 0.755" wide x 1.057" high, behind panel includung terminals. Note: Threaded bushing length: 0.496". Actuator length: 0.535". Made in the USA. Learn More

Switch, toggle. Switch guard only/face plate. Material: metal. Fits 3 hole mount type toggle switches. Each with rubber boot. Learn More

CUTLER-HAMMER - 7565K7 - Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 15Amp 125VAC/10Amp 250VAC (3/4HP 250VAC).

Actuator: On-None-Off.

Connection: Male 1/4" spade terminals.

Mech: Panel, one hole.

Body: 1.330" long x 0.750" wide x 1.198" high, behind panel includung terminals.

Note: Threaded bushing length: 0.480".

Actuator length: 0.567".

Made in the USA.

Listed: UL/CSA

Learn More

EATON CUTLER-HAMMER - 7565K5 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 15Amp 125VAC/10Amp 250VAC (3/4HP 250VAC).

Actuator: On-None-Off.

Connection: solder lugs.

Mech: Panel, one hole.

Body: 1.330" long x 0.750" wide x 1.010" high, behind panel including terminals.

Note: Threaded bushing length: 0.354".

Actuator length: 0.578".

Made in the USA.

Listed: UL/CSA.

Learn More

Switch, toggle. Contacts: DPDT MOM.(N.C.). Contact Ratings: 15Amp 125VAC. Actuator: On-(Off). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.34" long x 0.78" wide x 0.738" deep, plus terminals.. Note: Standard 3/8" D bushing x 0.467" long (0.647" long seated). Actuator extends 0.705". Up position MOM. Double marked 8828K25. Learn More

CUTLER-HAMMER - MS35058-31 - 8809K16 - JBT58 - Switch, Toggle.

Eaton’s military purpose switches are designed to meet the requirements of MIL-S-83731. Sealed Switches have a silicone rubber lever seal assembled between the lever and the bushing to resist the entrance of contaminants such as dust, sand or water into the contact structure. The switch mechanisms are completely enclosed to resist the entrance of contaminants into the switch. All metal parts are plated to resist corrosion. The heavy duty switches are offered in both standard toggle lever and lever lock versions. Circuit designations are stamped on the side of each switch.

SPDT On/Off/ON(Mom), 3 pos.

Double marked JBT58, Formerly Known as ST42H.

Maximum voltage: 220VAC/250VDC.

Threaded bushing length: 0.505".

Actuator: sealed 0.663" long.

Dimensions: 1.132" long x 0.627" wide x 0.664" high.

NSN 5930-00-655-1523

Contacts: 3 screw terminals. 

 

Learn More

Safran - Cutler-Hammer - Eaton - 8867K5 Switch, toggle.

DPST On/Center -off.

Threaded bushing: 1/4" D x 0.144" long.

Actuator: 0.445" long.

Dimensions: 0.530" x 0.544", square.

Termination: 4 solder terminals.

Note: Miniature. Complete with hardware.

NSN: 5930-00-889-8602

Made in USA

Learn More

Switch, toggle. Contacts: SPST.MOMENTARY (N.O.) Contact Ratings: 5Amp 125VAC. Actuator: Off-(On). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.143" long x 0.633" wide x 0.62" deep, plus terminals. Note: Standard 3/8" D bushing x 0.387" long (seated). Actuator extends 0.664". Learn More

Cutler-Hammer / Eaton * - 8803K13 - Switch, toggle.

SPST Center-Off/On, 2 Position.

Threaded Bushing Length: 0.509".

Lever Length: 0.658".

Dimensions: 1.147" long x 0.633" wide x 0.618" high.

Contacts: 2 Solder Terminals.

Complete with washers and nuts.

Applications: Aircraft Switch

Learn More

Cutler-Hammer / Eaton * - 8803K10 - ST42A - Switch, toggle.

Contacts: SPST.

Actuator: On-Off.

Mech: Panel, single hole mount.

Body: Threaded bushing length: 0.493".

Lever length: 0.705".

Dimensions: 1.144" long x 0.631" wide x 0.617" high.

Contacts: 2 solder terminals.

Complete with washers and nuts.

Note: Double marked ST42A.

NSN 5930-00-112-5288

New Old Stock

Applications: Aircraft Toggle Switch

Learn More

Switch, toggle. SPDT 2 Position 3Amp 125VAC/1Amp 250VAC. Threaded bushing 3/8" D x 0.334" long. Actuator: Bat 0.653". Material: plastic. Mount: panel. Dimensions: 1.158" long x 0.690" wide. Termination: 3 solder terminals. Complete with hardware. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 6Amp 125VAC. Actuator: On None On. Connection: 1/4" QC terminals. Learn More

Switch, toggle. SPDT 10Amp 250VAC. 2 Position, On/None/ON(Mom). Bushing length: 1/2". Lever length: 9/16". Contacts: 3 - 1/4" quick connect terminals. More info: Page 154 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf Learn More

Eaton CUTLER-HAMMER - 8690K11 - Switch, Toggle.

DPDT, 2 position, 15Amp 125VAC/10Amp 250VAC.

One Hole Panel Mount.

Dimensions: 2.5" long x 1.158" wide x 1.055" high. 0.95" behind panel.

Contacts: 6 screw terminals.

New Old Stock

Alternate: TE Connectivity 8690K

Learn More

Safran Eaton CUTLER-HAMMER - 8511K7 - Switch, toggle.

DPST, Off/ON(Mom).

Threaded bushing length: 0.461".

Lever length: 0.681".

Environmentally sealed.

One hole mount.

Dimensions: 1.324" long x 0.891" wide x 1.224" high.

Contacts: 4 screw terminals.

Complete with hardware kit.

 

Learn More

Safran Eaton CUTLER-HAMMER - 8511K6 - Switch, toggle.

DPDT Center-Off, 3-position

Bushing length: 0.450".

Lever length: 0.680".

Environmentally sealed.

One hole mount.

Dimensions: 1.327" long x 0.897" wide x 1.230" high.

Contacts: 4 screw terminals.

Complete with hardware kit.

New Old Stock

Learn More

Switch, toggle. SPST, 2-Position, One hole mount. Environmentally sealed. Dimensions: 1.253" wide x 0.601" deep x 1.173" high. Contacts: 2 screw terminals. Complete with hardware. Learn More

Switch, toggle. SPDT C.O. On/Off/On. One hole mount. Environmentally sealed. Dimensions: 1.253" wide x 0.601" deep x 1.173" high. Contacts: 3 screw terminals. Complete with hardware. Learn More

Eaton - Cutler Hammer - 8376K1 Switch, toggle.

Contacts: DPST.

Contact Ratings: 5Amp 125VAC.

Connection: Solder.

Inclosure: Fully Inclosed

Mech: Panel, Bushing.

Panel hole: 1.161" long x 0.697" wide.

Note: Standard 3/8" D bushing x 0.552" long.

NSN: 5930-01-076-6448

Made in USA

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 3Amp 250VAC. Connection: wire leads. Mech: Panel, bushing. Panel hole: 1.008" long x 0.516" wide. Note: Standard 3/8" D bushing x 0.473" long. Learn More

Switch, toggle. Contacts: 3PDT.C.O. Contact Ratings: 15Amp 125VAC (10Amp 250VAC, 1HP 1-2-3PH, 115-575VAC). Actuator: On-Ctr, Off-On. Connection: solder. Mech: Panel, 2 hole flange at 0.871" centers. Panel hole: 1.864" long x 1.390" wide x 0.819" deep, plus terminals. Note: 3 Position. Actuator extends to 0.800" from front mount flange. Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 6Amp 125VAC/3Amp 250VAC. Actuator: On-None-Off. Connection: 1/4" QC terminals. Mech: Panel, bushing. Panel hole: 1/139" long x 0.637" wide. Note: Standard 3/8" D bushing x 0.517" long. Learn More

EATON CUTLER-HAMMER - 7564K90 Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 15Amp 125VAC/10Amp 250VAC.

Actuator: On-None-On.

Connection: Screw Terminals.

Mech: Panel, bushing.

Panel hole: 1.329" long x 0.750" wide x 0.785" deep, plus terminals.

Note: Standard 3/8" D bushing x 0.0.474" long (0.654" long seated).

Actuator extends 0.600".

Learn More