Toggle Switch

Switch, toggle. SPDT 3 Position, center off. 15Amp 125VAC/10Amp 250VAC/2Amp 125VAC/1Amp 250VAC. Threaded bushing length: 0.391". Actuator length: 0.553". Mount: panel. Termination: (3) 1/4" male quick connect terminals. Complete with hardware. Learn More

Cutler-Hammer / Eaton - MS24523-28 - 8500K7 - Switch, Toggle.

Contacts: SPST NO.

Actuator: Momentary.

Connection: 3 Ssolder Terminals.

Mech: Panel, Bushing.

Body: 1.262" long x 0.6" wide.

Bushing standard 3/8" D x 0.462" long.

Actuator: 0.689" long.

Note: Environmentally sealed, Center Off - Mom one side.

Double marked 8500K7.

Learn More

EATON CUTLER-HAMMER - 8822K10 - MS35059-22 - Switch, Toggle.

Contacts: DPST.

Actuator: On-Off.

Connection: 4 screw terminals.

Mech: Single hole mount/bushing.

Body: 1.310" long x 0.750" wide x 0.761" deep plus terminals.

Note: Threaded bushing: 0.463" D x 0.341" long.

Actuator length: 0.718" long.

NSN: 5930-00-655-1575

New Old Stock

Made in the USA.

Learn More

EATON - CUTLER-HAMMER - 8821K6 - Switch, toggle.

Contacts: DPDT.

Contact Ratings: 125VAC 15Amp.

Actuator: On-Off-On.

Connection: solder terminals.

Mech: panel, single hole mount 15/32 - 32 threaded bushing.

Panel hole: 1.323" long x 0.750" wide x 0.767" deep.

Note: Center off. Bushing length: 0.465" long.

Actuator length: 0.668" long.

Double marked ST52P.

Learn More

EATON - CUTLER-HAMMER - 7580 - 3-028 - Switch, Toggle.

Contacts: DPST.

Contact Ratings: 6Amp 125VAC/3Amp 250V.

Actuator: 125 - 277VAC.

Connection: Solder terminals.

Mech: Panel, bushing.

Panel hole: 1.318" long x 0.749" wide x 0.740" behind panel plus contacts.

Note: Bushing length: 0.501" long.

Actuator length: 0.573" long.

Learn More

Switch, toggle. Contacts: DPST. Actuator: On - Off (Mom). Connection: screw terminals, #6-32. Mech: Panel, Bushing 15/32" - 32 thread. Body: 1.341" long x 0.750" wide x 1.000" behind panel. Note: Threaded bushing length: 0.473". Actuator length: 0.700". Double marked ST52L. Learn More

Switch, toggle. Contacts: SPST-NO. Contact Ratings: 115VAC 10Amp. Actuator: ON(Mom)-Off-None. Connection: screw terminals #6-32. Mech: Panel, Bushing 15/32" - 32 thread. Body: 1.140" long x 0.635" wide x 1.014" deep including terminals. Note: Threaded bushing length: 0.508". Actuator length: 0.675". Double marked AN3021-11. Complete with hardware. Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 10Amp 115VAC. Actuator: On - Off (Mom). Connection: solder. Mech: Panel. Panel hole: 1.134" long x 0.637" wide x 0.684" high. Standard 15/32" threaded bushing x 0.517" long (seated). Actuator: 0.690" long. Note: Complete with hardware. MS35058-29. Former MS35058-10. Learn More

CUTLER-HAMMER - ST40F - Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 10Amp 115VAC.

Actuator: On-On (Mom).

Connection: screw.

Mech: Panel. Panel hole: 1.134" long x 0.637" wide x 0.684" high.

Standard 15/32" threaded bushing x 0.529" long (seated).

Actuator: 0.695" long.

Note: Complete with hardware.

MS P/N: MS35058-26.

Former P/N: MS35058-6.

Proudly Made in USA

 

Learn More

CUTLER-HAMMER - ST12B - Switch, Toggle.

Contacts: SPST.

Actuator: On-Off (Momentary).

Connection: Solder, Terminals

Current Rating: 125 VAC 6A, 250VAC 3A

Mech: Panel.

Body Dimensions: 1.152" long x 0.675" wide x 0.564" behind panel.

Standard 15/32" threaded bushing x 0.520" (seated) long.

Note: Complete with hardware.

Learn More

EATON CUTLER-HAMMER - 8785K6 - Toggle. SPDT Aircraft Flange Mount

SPDT Aircraft Flange Mount

See Attached Mil Specifications

NSN 5930-00-989-4285, MS25072-23

New Old Stock - Made in USA

Learn More

Cutler-Hammer / Eaton - 7692K63 - Switch, Toggle.

Contacts: 4PDT.

Contact Ratings: 15Amp 125VAC / 10Amp 250VAC, 3/4HP 250VAC.

Actuator: On-Off-On, no bat.

Connection: 12 screw terminals.

Panel hole: 1.436" x 1.331" x 0.971" high plus threaded bushing 0.5".

Note: Center off.

New Old Stock - Made in USA

Learn More

Cutler-Hammer / Eaton - 8887K5 - AN3227-5 - Switch, Toggle.

Mil spec series of switches made by both Cutler-Hammer and also Arrow Hart. These switches were used in military spec equipment and aircraft from the 1940's, 1950's up to the 1960's.

Contacts: 4PDT.

Contact Ratings: 15A 125VAC/10A 250VAC.

Actuator: On-Off-Mom.

Connection: 12 Screw Terminals.

Mech: Panel, Aircraft Flange with 1.8" centers.

Flange: 1.008" wide x 2.214" high.

Body: 1.445" long x 1.338" wide x 1.338" behind panel.

Insulation Resistance: 100 MegOhms

Note: Rubber gasket/Environmentally sealed.

Double marked AN3227-5.

Alternate: 8884K5

Genuine Cutler Hammer - New Old Stock - Made in USA

Application: Aviation, Vintage World War 2 Military Grade

Learn More

Cutler-Hammer Eaton - 8811K18 -  Switch, Toggle.

Contacts: SPST. None/Off/On

Contact Ratings: 115VAC 10Amp. 28VDC

Contact Plating: Silver

Actuator: Off - ON(Mom).

Connection: screw terminals #6-32.

Mech: Panel, Bushing 15/32" thread.

Body: 1.140" long x 0.635" wide x 1.014" deep including terminals.

Note: Threaded bushing length: 0.480".

Actuator length: 0.675".

Double marked MS35058-28.

Complete with hardware.

Learn More

Cutler-Hammer Eaton - 7566K83/84 Switch, Toggle.

Contacts: SPST-NO.

Contact Ratings: 15Amp@125VAC, 10Amp@250VAC.

Actuator: Momentary.

Connection: Screw Terminals.

Mech: Panel. Body: 1.328" long x 0.750" wide x 1.014" deep including terminals.

Note: Threaded Bushing Length: 0.457".

Actuator Length: 0.324".

No knob.

Learn More

EATON  CUTLER-HAMMER - 7570K4 Switch, toggle.

Contacts: DPDT.

Contact Ratings: 15Amp 125VAC/10Amp 250VAC/1/2HP 250VAC.

Actuator: Off - ON(Mom).

Connection: solder terminals.

Mech: panel. Body: 1.325" long x 0.750" wide x 0.994" behind panel.

Note: Threaded bushing length: 0.470".

Actuator length: 0.560".

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 10Amp 125VAC, 5Amp 250VAC. Mech: For wall mounted switch boxes. Note: Color: Ivory. Learn More

Switch, toggle. Contact Ratings: 120/277VAC/15Amp 3-Way. Actuator: illuminated. Illumination: Red. Note: Pilot light. Back and side wired. Spring loaded screw terminal, hex grounding screw. Application: for mounting in a 2x4 handy box. Learn More

CHALLENGER - 1261-RD Switch, Toggle.

Contacts: Single Pole.

Contact Ratings: 120/277VAC/15Amp.

Actuator: Illuminated.

Illumination: Red.

Material: Thermoplastic Boby, Polycarbonate Toggle.

Note: Pilot Light.

Back and side wired.

Spring loaded screw terminal, hex grounding screw.

Application: for mounting in a 2x4 handy box.

UL CSA Approved

Alternates: LEVITON 1201-PLR, P&S PS15AC1-RPL, Hubbell HBL1201PL, Cooper AH1201PL

Learn More

Switch, toggle. Contacts: SPST. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 120-250VAC). Connection: screw. Mech: Panel, bushing mount. Panel hole: 29.4mm long x 16.0mm wide x 15.9mm behind panel plus contacts. Note: Bushing length: 13.4mm long. Actuator length: 16.8mm long. Cross: Cutler-hammer 7546K38-7501-K13, JBT 4222L. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp/125VAC. Actuator: On-On. Mech: panel, 3/8" bushing. Body: 1.14" long x 0.64" wide x 0.615" high. Panel hole: Contacts: pcb terminals. Note: Bushing length: 0.517" (13.2mm). Actuator length: 0.683" (17.3mm). Learn More

Switch, toggle. Contacts: 4PDT. Contact Ratings: Center-off. Connection: 1/4" male QC terminals. Mech: Panel, bushing mount. Panel hole: 1.449" long x 1.305" wide x 0.992" high, plus all contacts, bushing and actuator. Overall 2.555" long. Note: Heavy duty. Learn More

C & K Components - 7101MD9ABE - Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 5Amp 120VAC or 28VDC, 2Amp 250VAC (0.4VA 20V AC/DC).

Actuator: On-None-On.

Connection: PC Gold Leads.

Mech: PCB, Right Angle

Note: Miniature.

Non Threaded Bushing.

Learn More

Switch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 125VAC, 2Amp 250VAC. Actuator: On-On-(Mom). Connection: solder. Mech: PCB or Panel. Panel hole: 0.844" long x 0.5" wide. Note: Miniature. Threaded 1/4" bushing. Learn More