Other Process Control

Inventronics - EUC-150S070ST - LED Driver, 150W Constant Current Type

The EUC-150SxxxST Series operate from a 90 ~ 305 Vac input range. These units will provide up to a 5.95 A of output current and a maximum output voltage of 428 V for 150 W maximum output power. They are designed to be highly efficient and highly reliable. The standard features include lightning protection, over voltage protection, short circuit protection, and over temperature protection.

Input Voltage / PFC: 90 ~ 305 Vac / 0.99 (typical)

Output Voltage: 128 ~ 214 VDC, 1.05A 150 Watt Constant Current

Ultra High 92% Efficiency

Active Power Factor Correction (0.99 Typical)

Constant Current Output

Lightning Protection

Fully encapsulated with waterproof IP67 level compliant

Reliability Protections: OVP, OTP, SCP

Safety Regulation: Comply with UL8750 & EN61347

MTBF: 300,000 hrs @ 25ºC, full load, 110 Vac input

Lifetime: 80,000 Hrs @ 110 Vac Input, 80% load, 25ºC ambient Temp.

Inventronics - EUC-150S070STA - LED Driver, 150W Constant Current Type

The EUC-150S070STA LED Driver is a 150W, constant-current LED driver that operates from 90-305 Vac input with excellent power factor. It is created for high bay, tunnel and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure trouble-free operation, protection is provided against input surge, output over voltage, short circuit, and over temperature.

Input: 100-240VAC/277VAC.

Output: 107 - 214 VDC Output.

High Efficiency (Up to 93%)
Constant Current Output
0-10V Dimming Control
Input Surge Protection: 4kV line-line, 6kV line-earth
All-Around Protection: OVP, SCP, OTP
Waterproof (IP67) and UL Dry / Damp / Wet Location
SELV Output
TYPE HL, for use in a Class I, Division 2 hazardous (Classified) location
UL Type TL (Temperature Limited)

WEHO - S-400-24 - Power Supply, DC, Switching. 400 Watt, 24 VDC, 17 Amp

Connect this unit to 110 or 220 Volts AC household power, and it will supply 400 Watts at 24 Volts DC and 17 Amps.

This power supply has been engineered specifically for use with DC motors. Most power supplies designed for use with LED lighting or other electronics will simply shut down when exposed to the high current demands of motors. Built-in current limiting protects the unit from overloads and short circuits. The current limiting feature enables these power supplies to keep functioning through the high-current start-up surges from motors. AmpFlow power supplies will just limit the current to the rated maximum even when a larger load is called for, (like when a DC motor starts up). Also, inductive loads (like motors) can cause damage to power supplies that are not designed for them.

These power supplies also work well in any application where AC line voltage needs to be converted to DC voltage. Other uses include LED lighting, HAM radio, battery charging, and replacing plug-in AC adapters when more power is required.

Short-circuit and overload protections help these units survive harsh operating conditions. The power supply shuts down temporarily if the temperature, current, or voltage goes beyond the safe operating range, and it starts up again automatically when the condition goes away – no rebooting is necessary.

This high-efficiency power supply has an output voltage that is adjustable by plus or minus 10%. It includes an EMI filter to minimize interference with radio signals and a soft-start circuit that reduces the AC inrush current peaks. Every power supply goes through a full-load burn-in test, so no defective unit leaves the factory.

DC output voltage: 24V

DC output current: 17A

DC output voltage error: ±1%

Ripple & noise: 150mV

Efficiency: 86%

AC input voltage range: 85-132VAC/170-264vac 47-63HZ 

Input current: 6.5A/115V 4A/230V

AC inrush current: Soft-Start Current 25A/115V 50A/230V

Leakage current: 3.5mA/240VAC

DC adjustable range: ±10% rated output voltage

Over load protection: 105-135% cut off the output auto -recovery

Over-voltage protection: 115-135 cut off the output auto -recovery

Setup rise hold up time: 200ms 50ms 20ms

Withstand voltage: I/P-O/P:1.5KVAC 1minute, I/P-FG:1.5KVAC 1minute, O/P-O/P:0.5KVAC 1minute

Withstand temperature: -10°C~+60°C,20%-90% RH

Dimensions: 8.5" X 4.5" X 2.0"

Weight: 1.05kg (2 Pounds)

This unit meets all the following safety and EMC standards: UL 1950, EN60950, EN55022, IEC100-3-2, CE, ROHS

Applications: Motor Controllers, CNC, Industrial Automation, LED Strip Lights, CCTV Power Supply , AC/DC Adapter.

Alternates: AmpFlow S-400-24, Meanwell 2-400-24, Mulview S-400-24, Mingwei S-400-24

Factory New

Japan Servo Motors - KH42HM2-852 - 1.8 Degree 2 Phase Hybrid Stepping Motor

Commerical Quality KH42 Series 800 Type High efficiency, High Torque, Low Vibration and Low Noise Motor.

Much improved quality and performance over the chinese Nema 17 Stepper Motors on Amazon & Ebay! Very nice upgrade for 3D printers at a great price!

This new series 800 type, which maintains the high torque performance of our conventional 500 Type and lower vibration and noise. High efficiency and high torque have been achieved through our intensive research on magnetic circuitry. A unique  tooth profile has been employed through the development of a new  proven theory to achieve low vibration and low noise. 

Specifications 

NEMA 17

Drive Method - Uni-Polar 6 Wire

Bearing Description

Step Angle - 1.8 Degrees/step

Voltage - 24 Volts 

Current - 0.38 Amps/Phase

Winding Resistance - 22.4 Ohms/Phase

Inductance - 21.5 mH/Phase

Holding Torque - 2.0 kgf cm (28 ounce inch)

Detent Torque - 150 gf cm (2.1 ounce inches)

Rotor Inertia - 42 g cm2 (0.23 ounce inches)

Weight -  260 g (0.57 Lbs.) 

Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

Insulation resistance  500 VDC 100Mohm min.

Dielectric Strength - 500 VAC 50 Hz 1 minute

Operating Temperature Range 0 - 50C

Allowable Temperature Rise 70 degrees

Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

NEMA 17

Drive Method - Uni-Polar 6 Wire

Bearing Description

Step Angle - 1.8 Degrees/step

Voltage - 24 Volts 

Current - 0.38 Amps/Phase

Winding resistance - 22.4 Ohms/Phase

Inductance - 21.5 mH/Phase

Holding Torque - 2.0 kgf cm (28 ounce inch)

Detent Torque - 150 gf cm (2.1 ounce inches)

Rotor Inertia - 42 g cm2 (0.23 ounce inches)

Weight -  260 g (0.57 Lbs.) 

Insulation Class JIS Class E (120 C 248F) UL Value Class B-130C 266F)

Insulation resistance  500 VDC 100Mohm min.

Dielectric Strength - 500 VAC 50 Hz 1 minute

Operating Temperature Range 0 - 50C

Allowable Temperature Rise 70 degrees

Dimensions 1.65" X 1.65"  X  1.34" (42mm X 42mm X 34 mm Max) 

Superior in Quality, Reliability, and Durability to the Cheap Chinese copies.

ApplicatIons: RobotIcs,  3D Printer,  Arduino,  CNC,  Router.

TURCK - CDN-IM-8-0043 Bus Stop Interlink BT Block.

Product Number: ARP00005172

More Information: http://www.tipteh.rs/pdf/Turck/Fielbus%20technology/DeviceNet/DeviceNet_catalog_english.pdf

SSAC - PRLM425 - Relay, TDR.

Time delay 120VAC.

SKAN-A-MATIC - S28002 - Photoelectric, Sensor / Wafer PhotoDetector Sensor. New

The S28 series skanner is a specially constructed LED Sensor designed to detect wafers for the semiconductor industry. polished and unpolished wafers can be detected from the same sensing point.

Operating Voltage: 30 VDC Max.

Spectra Response: 910 nm peak, filtered to respond to less than 5% at 750 nm and less than 0.1% at 700nm.

4 Conductor, 26 GA, Teflon Covered Cable with shielded photodetector leads and overall shield.

LED Skanner

Operating Distance 0.050".

Bottom Mounted Cable.

Note: LED must be current limited, 40mA max which will result in a forward voltage drop of 1.0-1.6VDC.

New Old Stock in Manufacturer's Packaging

Clarostat Honeywell Scan-O-Matic T22029 - Logic Card / Board

The Logic Card is a required component for each control. Since some functions use only one output, it is wise to select the desired card before ordering the Chassis.

AND/NAND—OR/NOR Logic w/One Shot

Logic Board

New Old Stock

Clarostat Honeywell SKAN-A-MATIC - T21011 -  Photoelectric Amplifier Scanner Control Module

The T21011 photoelectric amplifier module is designed to amplifieroutput from a photodetector. The output of the photodetector is taken as the input of the module.

Status: Discontinued

Features:
■ Modular approach
■ Printed circuit board mounting
■ Low power consumption
■ Small size
■ Gold plated leads
■ Epoxy encapsulated

With Adjustment and LED Indicator

Mount: PCB 

Connections: 5 Square Pins

New Old Stock

Made in the UK

Clarostat Honeywell SKAN-A-MATIC - T21010 -  Photoelectric Amplifier Scanner Control Module

The T21010 photoelectric amplifier module is designed to amplifieroutput from a photodetector. The output of the photodetector is taken as the input of the module.

Status: Discontinued

Features:
■ Modular approach
■ Printed circuit board mounting
■ Low power consumption
■ Small size
■ Gold plated leads
■ Epoxy encapsulated

Mount: PCB 

Module with LED & Trimpot.

Connections: 5 Square Pins

New Old Stock

Made in the UK

Clarostat Honeywell SKAN-A-MATIC - T21009 -  Photoelectric Amplifier Scanner Control Module

The T21009 photoelectric amplifier module is designed to amplifieroutput from a photodetector. The output of the photodetector is taken as the input of the module.

Status: Discontinued

Features:
■ Modular approach
■ Printed circuit board mounting
■ Low power consumption
■ Small size
■ Gold plated leads
■ Epoxy encapsulated

Mount: PCB 

Connections: 9 Square Pins

New Old Stock

Made in the UK