Temperature Switch

Filter  
Manufacturer  
Unit of Measure  
Price  
View as List Grid

Items 1-24 of 87

Page
per page
Set Descending Direction
  1. Thermtrol/Klixon - 7AM Series Thermal Switch - 7AM205A5-823 - 90C  (194F) Switch, Thermal. NC Cut-out.
    Thermtrol/Klixon - 7AM Series Thermal Switch - 7AM205A5-823 - 90C (194F) Switch, Thermal. NC Cut-out.
    Special Price $4.98 Regular Price $8.95 As low as $1.98

    Thermtrol/Klixon - 7AM Series Thermal Switch - 7AM205A5-823 - 90C Switch, Thermal. NC Cut-Out.

    Klixon 7AM thermal protectors prevent overheating in a variety of consumer, industrial and commercial products. It is a miniature, snap-acting, thermally operated device that is a proven performer in protection technology. 

    Thermitrol or Klixon (Devision of Sensata) 7AM Series Snap Action Thermal Switch. 7AM205A5-823 Normally Closed contact opens at 90 Deg C. (194F) Mount: PCB, 2 pin, Radial Leads w/1/4" nickel leads. For overcurrent and overcharge protection.

    Dimensions: 43" wide x 0.80" Long (0.952 high including leads) x 0.2" deep. Current Ratings 16 VDC @20 Amps, 115VAC @ 22Amps, 277VAC @ 8 Amps, 600VAC @4 Amps. Good for several amps and 120 Volts.

    In order to achieve optimum heat transfer from the protected medium or ambient to the thermostat, the 7AM has been designed with the case connected to the bimetallic disc. This feature makes it necessary to electrically insulate the 7AM from the mounting surface. 

    Applications: Battery Packs, Battery chargers, Permanent Split capcitor motors, Shaded Pole Motors, HID ballasts, Florescent lighting ballasts/transformers, Vacuum cleaners, Recessed lighting fixtures, Automotive accessory motors/solenoids ect.. - PC boards.

    More information: 

    UL/CUL Approved

    Learn More
  2. ANZEN DENGU CO. LTD - V086 - Fuse, Thermal. 2Amp. Package of 10.
    ANZEN DENGU CO. LTD - V086 - Fuse, Thermal. 2Amp. Package of 10.
    Special Price $4.98 Regular Price $6.00 As low as $3.98

    ANZEN DENGU CO. LTD - V086  Fuse, Thermal Cutt-off.

    Voltage: 250VAC 2Amp / 50VDC 4Amp.

    Rated functioning temperature: 174-181F,  81+/-2 deg C and below.

    Temperature cutoff: 86C / 187F.

    TM: Max temp at which no reconduction will be caused for ten minutes: 95C.

    Dimensions: <3mm D x 9mm long with 2 long leads, 68mm wire leads.

    Trademark: TAM UL CSA VDE BEAB.

    Package of 10.

    Applications: Electric home appliances, electric industrial equipments, office automation equipments, plain paper copiers, transformers, motors, etc.

    Learn More
  3. THERM-O-DISC - 36TX22 F223-45F - Thermostat, Thermal Cut-out. NO 230C.
    THERM-O-DISC - 36TX22 F223-45F - Thermostat, Thermal Cut-out. NO 230C.
    Special Price $5.98 Regular Price $8.95 As low as $4.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    THERM-O-DISC - 36TX22 F223-45F

    The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap–action of the bimetal disc provides high–speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC, and 16 amps at 250VAC. The 36T carries global agency recognition and is used in a wide range of applications including coffee makers and other small appliances, gas furnaces, clothes dryers, and dishwashers.

    Thermostat, Thermal Cut-out. Normally Open Contact (NO).

    Two male 3/16” (4.8mm) Quick Clade Terminals which can also be soldered.

    Snap Action SPST Contacts Automatic Reset

    Mount: panel, round 17.7mm with 24mm centers and has (2) male 4.8mm quick connects which can also be soldered to.

    The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC. 

    Normally open Contacts closes at 223 F and opens when the temperature drops to 178F. 

    Flange mount 1/2" Bimetal Disc switch.

    Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

    Proudly Made in USA - New Old Stock

    Learn More
  4. KLIXON - C9192-1-2 - Thermostat, Adjustable 0-500 Deg. 10 Amps, With spec sheet.
    KLIXON - C9192-1-2 - Thermostat, Adjustable 0-500 Deg. 10 Amps, With spec sheet.
    Special Price $12.98 Regular Price $16.50 As low as $9.98
    IN STOCK - MORE THAN 1,000 READY TO SHIP!

    KLIXON - C9192-1-2 Thermostat, Adjustable 0-500 (F) range

    Used in Baking ovens, removable appliance controls and where low mass.High heat ratios require rapid thermostat response.

    10Amps.

    Silver Contacts Open on temperature Rise.

    1650 watt 120VAC, 2400 watt 240VAC (resistive).

    Rapid response, industry standard.

    Body approximately 4-5/8" x 5/16" wide on round shaft.

    Adjustable screw may have to be loosened.

    See Attachement for Detailed Specifications.

    Availabe upon request.

    Learn More
  5. Federal Pacific / Reliance Electric - PMF-1 - Line Voltage Fan Cooling Ventilation Thermostat
    Federal Pacific / Reliance Electric - PMF-1 - Line Voltage Fan Cooling Ventilation Thermostat
    Special Price $14.98 Regular Price $28.50 As low as $10.98
    IN STOCK - MORE THAN 500 READY TO SHIP!

    Federal Pacific / Reliance Electric - PMF-1 - Line Voltage Mechanical Fan Cooling Thermostat.

    Ideal for whole house exhaust ventilation, power vents, gable roof & attic fans, industrial or farm.

    Commercial High Quality, Mercury-Free, Heavy Duty, Single line break.

    Approx. 50ÂşF - 95ÂşF Turn-on Setting.

    Single Line Break 22 Amp Max 120 VAC. 

    Ratings: 3/4 H.P. @ 120VAC 60HZ. 1 Phase or 1 1/2 HP @ 240 VAC 60 Hz  1 Phase

    UL listed. 

    Made in USA

    Learn More
  6. Emerson THERM-O-DISC - 36TR11 13191 L200-20F - Thermostat, Cut-out. NC.L200-20F
    Emerson THERM-O-DISC - 36TR11 13191 L200-20F - Thermostat, Cut-out. NC.L200-20F
    Special Price $5.98 Regular Price $8.95 As low as $4.98

    THERM-O-DISC - 36TR11 13191 L200-20F Thermostat, Thermal Cut out. NC L200-20F

    Thermodisc The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap–action of the bimetal disc provides high–speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC, and 16 amps at 250VAC. The 36T carries global agency recognition and is used in a wide range of applications including coffee makers and other small appliances, gas furnaces, clothes dryers, and dishwashers.

    Thermostat, Thermal Cut out. NC. Self-resetting.

    Mount: panel, round 17.7mm with 24mm centers. 

    Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

    Snap Action SPST Contacts Automatic Reset

    Surface Mount where Blade Terminals positioned at 90 Degrees

    Set Point: Normally Closed Contact opens at 200F and closes when temperature lowers to 180F. 

    Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

    Proudly Made in USA - New Old Stock

     

     

    Learn More
  7. THERM-O-DISC - 41T14-L160-38116 - Press-to-Reset Thermostat L160
    THERM-O-DISC - 41T14-L160-38116 - Press-to-Reset Thermostat L160
    Special Price $8.98 Regular Price $12.95

    THERM-O-DISC - 41T14-L160-38116 Press-to-Reset

    160 degress F, Normally Closed Contacts

    Thermostatic Switch w/Button-on-Flange mounts-on 1.5" slots L160-degrees.

    Heavy Duty - Screw Terminals 

    Applications: Industrial, Commercial, & Water Heaters

    Learn More
  8. EMERSON THERM-O-DISC - 36TX22-13116-F140-20 - Thermostat, Thermal Cut  Out. NO.
    EMERSON THERM-O-DISC - 36TX22-13116-F140-20 - Thermostat, Thermal Cut Out. NO.
    Special Price $5.98 Regular Price $8.95 As low as $3.98

    EMERSON THERM-O-DISC - 36TX22-13116-F140-20

    The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap–action of the bimetal disc provides high–speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC, and 16 amps at 250VAC. The 36T carries global agency recognition and is used in a wide range of applications including coffee makers and other small appliances, gas furnaces, clothes dryers, and dishwashers.

    Thermostat, Thermal Cut out. NO.

    Self-resetting.

    Mount: panel, round 17.7mm with 24mm centers and has (2) male 4.8mm quick connects or solder connection. 

    Snap Action SPST Contacts Automatic Reset

    Surface Mount 3/16” (4.8mm) Blade Terminals 90 Degrees

    0.6" OD Flange Mount

    Set Point: Normally Open Contacts close at 140F and reopen when temperature lowers to 120F 

    Typical Applications
    • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens • Ventilation Fans

    Additional Information: https://www.relayspec.com/catalogs/018450/2005/PDF_productCatalog.pdf

    Alternates: 3660698, CA-140, CA-140-QC, KSD301

    Proudly Made in USA - New Old Stock

     

    Learn More
  9. EMERSON THERM-O-DISC - 36TX22 13115 F113-20 - Thermostat, Thermal Cut-Out. F113-20 NO.
    EMERSON THERM-O-DISC - 36TX22 13115 F113-20 - Thermostat, Thermal Cut-Out. F113-20 NO.
    Special Price $5.98 Regular Price $8.95 As low as $4.98
    IN STOCK - MORE THAN 500 READY TO SHIP!

    EMERSON THERM-O-DISC - 36TX22 13115 F113-20

    Thermostat, thermal cut out. F113-20 NO, self resetting. The 36T series of 1/2 inch bimetal thermostats from Therm-O-Disc offers proven reliability in a compact, versatile, cost-effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC. The 36T is applied to a wide variety of applications as either a regulating control or a safety limit.

    Thermostat, Thermal Cut out. NO.

    Mount: panel, round 17.7mm with 24mm centers and has (2) male 4.8mm quick connection ore solder. 

    Snap Action SPST Contacts Automatic Reset

    Surface Mount 3/16” (4.8mm) Blade Terminals 90 Degrees

    0.6" OD Flange Mount

    Set Point: Normally Open Contact closes at 113F and reopens when temperature lowers to 93F. 

    Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens • Ventilation Fans.

    Alternates: CA-115QC, CA-110, CA0110QC

    Proudly Made in USA - New Old Stock

    Learn More
  10. Emerson THERM-O-DISC - 36TX21-2310-L230-40F - Thermal cut out L230-40F. NC
    Emerson THERM-O-DISC - 36TX21-2310-L230-40F - Thermal cut out L230-40F. NC
    Special Price $6.98 Regular Price $9.95

    EMERSON THERM-O-DISC - 36TX21-2310-L230-40F - Thermal cut out L230-40F. NC

    The 36T series of 1/2'' bimetal snap disc thermostats from Therm-O-Disc offers proven reliability in a compact, versatile, cost-effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

    Thermostat, thermal cut out. 1/2" (12.77mm) Bimetal Disc. 3/16" blade terminals Straight panel mount connectors.

    Normally Closed contact opens at 230 F and closes when temperature drops to 190F.

    Snap Action SPST Contacts Automatic Reset

    Mount: panel, round 17.7mm with 24mm centers

    Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

    Surface Mount where Blade Terminals are positioned at 90 Degrees

    Note: Please see leads on each in photo, 2 different styles.

    Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

    Proudly Made in USA - New Old Stock

    Learn More
  11. Emerson THERM-O-DISC - 36TX21 13039 L200-25 - Thermal cut out. L200-25.
    Emerson THERM-O-DISC - 36TX21 13039 L200-25 - Thermal cut out. L200-25.
    Special Price $6.98 Regular Price $9.95

    EMERSON THERM-O-DISC - 36TX21 13039 L200-25 - Thermal cut out. L200-25.

    The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

    L200-25 Bi-metal - 1/2" (12.77mm).

    Mounted on flange with 15/16" Centers NC opens on temp increase. 

    Package: 1/2" (12.77mm), solder terminals.

    Two male 3/16” (4.8mm) quick connect Blade/Solder Terminals 

    Snap Action SPST Contacts Automatic Reset

    Set Point: Normally Closed Contact opens at 200F and closes when temperature lowers to 175 F. 

    Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

    Proudly Made in USA - New Old Stock

    Learn More
  12. Stemco - 471-647 - Thermal cutout NO, closes at 225 deg F.
    Stemco - 471-647 - Thermal cutout NO, closes at 225 deg F.
    Special Price $6.95 Regular Price $9.95

    Thermostat, thermal cutout. NO, closes at 225 deg F. Mount: 7/16" bushing/panel mount. Contacts: (2) 1/4" QC terminals, thread = 7/16 - 32. Package: white ceramic, threaded bushing, overall shaft 2-3/4" shaft. Note: No hardware.

    Learn More
  13. Stemco - 402-2532 - L140 G-7 - Thermal cutout.
    Stemco - 402-2532 - L140 G-7 - Thermal cutout.
    Special Price $5.95 Regular Price $8.95

    Thermal cutout. NC 15Amp L140. Male 1/4" QC 1.7" apart, mounting slots 1.7" apart.

    Learn More
  14. MICRO DEVICES - LL61501 - Switch, Temperature. Thermal Fuse, 150 Deg C. Fuseable Link
    MICRO DEVICES - LL61501 - Switch, Temperature. Thermal Fuse, 150 Deg C. Fuseable Link
    Special Price $2.98 Regular Price $3.50 As low as $1.49

    MICRO DEVICES - LL61501 Switch, Temperature.

    A Thermal Fuse or Fusable Link is a cutoff which uses a one-time fusible link. ... Unlike electrical fuses or circuit breakers, thermal fuses only react to excessive temperature and not to excessive current (unless the excessive current is sufficient to cause the thermal fuse itself to heat up to the trigger temperature). This fuse breaks the circuit when the temperature exceeds 150C.

    Micro Thermal fuse, 150 Deg C. (300 F)

    Package: Epoxy Molded, Radial Leads.

    Dimensions: 6.8mm wide x 2.5mm deep x 11.2mm high.

    Lead spacing: 4.2mm.

    Alternates: G4AO1152C, D150-002, 4300A1, LL61501, WP3392519

    Learn More
  15. Sensata Klixon - C4344-198-15 - 3100-3-322 - Precision Thermal cutout. NC 450 Deg F. Note: Elmwood/Honeywell 3100-3-322 Snap Switch.
    Sensata Klixon - C4344-198-15 - 3100-3-322 - Precision Thermal cutout. NC 450 Deg F. Note: Elmwood/Honeywell 3100-3-322 Snap Switch.
    Special Price $12.98 Regular Price $18.95

    Sensata Klixon - C4344-198-15 - 3100-3-322 Thermal cutout. SPST NC 450 Deg F.

    The Klixon® 4344 precision thermostat is constructed with a snap-acting bimetal disc, which serves as the actuating element. As the temperature reaches a pre-determined calibration point, the disc snaps to its reverse curvature producing a crisp, positive switching action inherent to Klixon® thermostats. This feature assures reliable, consistent operating temperature over a long cycle life. The standard thermostat is copper-nickel plated with silver contacts

    Note: Elmwood/Honeywell 3100-3-322 

    SPST Snap Action Normally Closed Contacts

    Normally Closed: Limit type application; contacts open on temperature rise at a predetermined (450F) temperature to de-engergize the circuit. Contacts automatically re-close as the device cools to a pre-determined (410F) temperature.

    Contact Rating: Life Cycles 100,000 Cycles = 30VAC/DC@5A, 125AVC@2.5A, 250VAC@1

    Contact Rating: Life Cycle 5,000 Cycles = 30VAC/DC@7A, 125VAC@6A, 250VAC@3

    Ambient Temperatur Range: -80F to 550F (-62.2 Cc -287.8C)

    Case: small metal disc 15.3mm D round on a oval base with 24mm mount centers, 2 teflon lead wires 4-3/4" long.

    Overall 9.0mm tall max.

    Inventory has either White or Blue Teflon Lead Wires,

    Additional: https://www.sensata.com/sites/default/files/media/documents/ourproducts_Thermostat_4344_datasheet.pdf

    Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment •  Automotive  • Microwave ovens

    Proudly Made in USA

     

     

    Learn More
  16. Elmwood Sensors Inc - R1-354 F190 - Thermal Switch, Normally Open
    Elmwood Sensors Inc - R1-354 F190 - Thermal Switch, Normally Open
    Special Price $5.95 Regular Price $8.95

    Elmwood Sensors Inc - R1-354 F190 Thermal Switch, Normally Open, Pre-wired with an inch of fine braided wire on each side. Dimensions: approximately 0.6" D x 0.54" high.

    Learn More
  17. THERMOSWITCH - 17021-0 - Thermostat. Adjustable -100 to 400 Deg F.
    THERMOSWITCH - 17021-0 - Thermostat. Adjustable -100 to 400 Deg F.
    $40.00
    Thermostat. Adjustable -100 to 400 Deg F, NO, 10Amp 120VAC, 5A 240VAC. Contacts close on temp rise. Dimensions: 6.5" long head x 5/8" OD. One inch (1") threaded mount. Note: Fenwal 00-017021-0. Learn More
  18. EMERSON THERM-O-DISC - 36TMH01-10539 L315-50F - Thermal Cut-out, Normally Closed Contacts, 315 - 50 F.
    EMERSON THERM-O-DISC - 36TMH01-10539 L315-50F - Thermal Cut-out, Normally Closed Contacts, 315 - 50 F.
    Special Price $9.98 Regular Price $14.95

    EMERSON THERM-O-DISC - 36TMH01-10539 L315-50F - Thermostats. Thermal cutout, Normally Closed Contacts.

    The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC. quality, reliability, affordability, versatility and world-wide agency approvals of the 36T Series makes it the snap-action thermostat of choice for a wide variety of temperature control applications.

    Bimetal snap-action thermostat.

    Mount: Panel/chassis surface mount bracket.

    Contacts are 2 axial Quick Connnect terminals. 

    Thermostat, Thermal Cut-out. Normally Closed Contacts

    Mount: panel, round 17.7mm with 24mm centers

    Snap Action SPST Contacts Automatic Reset

    Set Point: Normally Closed Contact Opens at 315F and closes when temperature lowers to 265F. 

    Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

    Proudly Made in USA - New Old Stock

    Learn More
  19. THERM-O-DISC - 20MAA3FA - Motor Protection Temperature Sensor Switch, NC Contacts.
    THERM-O-DISC - 20MAA3FA - Motor Protection Temperature Sensor Switch, NC Contacts.
    Special Price $12.98 Regular Price $16.95
    THERM-O-DISC - 20MAA3FA – Normally Closed Contacts Motor Protecting Temperature Sensor Switch. The Therm-O-Disc line of Motor Protectors offers accurate and reliable protection against hazardous overheating in single phase/single voltage A/C motors. This motor protector employs a snap-acting, current and temperature responsive bimetal disc for proven performance over life. An internal resistance heater utilizes the effects of current to bias the operation of the bimetal disc for added thermal response. A wide range of bimetal and heater combinations are available to cover specific design requirements. This design flexibility and proven performance has made Therm-O-Disc Motor Protectors a popular choice among the leading manufacturers of fractional horsepower motors. The operating mechanism inherent to all Therm-O-Disc Motor Protectors is the snap-action bimetal disc. During abnormal conditions, heat generated by resistance and/or motor ambient causes the bimetal disc to snap at the specified calibration temperature. This allows the circuit to open within the maximum safe limits of the motor windings. Once the motor returns to a normal operating temperature, the bimetal disc resets automatically. This closes the circuit and re-energizes the motor. This same snap-action principle is utilized in millions of Therm-O-Disc products applied in the appliance, heating and air conditioning industries. The Motor Protector features include: • High-speed contact separation ensures long contact life. • Current and temperature responsiveness for excellent design flexibility. The Motor Protector series has been rated by major agencies throughout the world. The agency ratings can be used as a guide when evaluating specific applications. However, the mechanical, electrical, thermal and environmental conditions to which a control may be exposed in an application may differ significantly from agency test conditions. Therefore, the user must not rely solely on agency ratings, but must perform adequate testing of the product to confirm that the control selected will operate as intended in the user’s application. This is an over temperature motor protector which opens its contacts (SPST) when excessive temperature is sensed. Bimetal Resistance: 0.0015 Ohm, Heater Resistance: 0.0320 Ohm Temperature: Opens @ 110 C (230 F), Closes @ 45 C (113 F) Current Rating: 50A @ L.R. 120V, 37 A @ L.R. 240V Dimensions: 1.38" Wide x 1.32" X R2.50 Radius Curved 0.38" Thickness. Weight: 0.5 Ounce (15 Grams) Termination: Two Side Entry 1/4" Quick Connect Terminals. Applications: Commercial, Industrial, and Residential, Including Several Whirlpool, Maytag, Kenmore Dryer as a motor fuse. New Old Stock Made in USA Learn More
  20. EMERSON THERM-O-DISC - 36TX22 13038 F230-40 - Thermostat, Thermal Cut out. F230-40. Normally Open Contacts.
    EMERSON THERM-O-DISC - 36TX22 13038 F230-40 - Thermostat, Thermal Cut out. F230-40. Normally Open Contacts.
    Special Price $6.98 Regular Price $9.95

    EMERSON THERM-O-DISC - 36TX22 13038 F230-40 - Thermostat, Thermal Cut out. F230-240, Normally Open.

    The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

    Thermostat, thermal cut out.

    Thermostatic switch, bi-metal 1/2" (12.77mm).

    Contacts: (2) 0.17" solder term, one on each side. 

    Set Point: Normally Open contact closes at 230F and closes when temperature lowers to 190F.

    Mount: panel, round 17.7mm with 24mm centers

    Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

    Snap Action SPST Contacts Automatic Reset

    Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

    Proudly Made in USA - New Old Stock

    Learn More
  21. MICROTEMP - 4204A PWNC - G4A - Switch, Thermal.  Fuse Cutout NC 98 Degree C.
    MICROTEMP - 4204A PWNC - G4A - Switch, Thermal. Fuse Cutout NC 98 Degree C.

    MICROTEMP - 4204A PWNC  - G4A - Switch, Fuse Thermal.

    Rated for continuous operating currents up to 10 amps @ 250VAC (15 amps @ 120VAC), the G4 series MICROTEMP® TCO is the industry standard for over-temperature protection. The G4 series is applied to millions of appliances and personal care products each year, providing reliable back-up protection for temperature controlling thermostats and other over-temperature conditions. The G4 series is also widely applied in office machines, portable heaters and industrial equipment as a thermal safeguard.

    Cutout Normally Closed, 98 Degree C. (208.5 Degree F).

    Thermal Fuse

    10A, 250 VAC

    New Old Stock

    Package: Axial 1/4" leads.

    Learn More
  22. Elmwood Sensors Inc - 3001-37-1-F212 74/52 - Bi-Metal Thermal cutouts
    Elmwood Sensors Inc - 3001-37-1-F212 74/52 - Bi-Metal Thermal cutouts
    Special Price $5.95 Regular Price $8.95

    Elmwood Sensors Inc - 3001-37-1-F212 74/52 

    Bi-Metal Thermal cutouts 3001 Series

    Non-Hermetic Thermostats(2) 1/8" QC terminals,

    DimensionS: 15.7mm round with oval base 30.4mm x 20.6mm , 24mm mt ctrs.

    Learn More
  23. Unidentified MFG - TCO-D085 PRGR 87C - Thermal Cut Out, Axial Leads, 87C/188F.
    Unidentified MFG - TCO-D085 PRGR 87C - Thermal Cut Out, Axial Leads, 87C/188F.
    Special Price $2.98 Regular Price $3.50 As low as $1.98

    Unidentified MFG - TCO-D085 PRGR 87C - Thermal Cut-outs, Axial Leads

    Thermal Cut-offs (also known as Thermal Fuses) are miniature, NON-RESETTABLE temperature sensitive devices designed to prevent appliances and electronic equipment from overheating. Thermal cutoffs are UL and CSA listed. Literally thousands of different applications have been devised for thermal-cutoffs, thus providing a large replacement market. Such applications include: Hair Dryers Refrigerators Battery Chargers Irons Hot Plates Glue Guns Electric Motors Window Fans Coffee Makers Microwave Ovens Popcorn Poppers Dishwashers And hundreds of others The TCO (Thermal Cut-Off) responds to temperature by interrupting an electrical circuit when the operating and/or environmental temperature exceeds the thermal rating of the device. This is accomplished when the internal organic pellet experiences a phase change, allowing the spring activated contacts to permanently open the circuit.

    Trip Open Temperature: 87C / 188F

    Maximum Current Rating: 15 Amps

    Typical Opening Temperature Tolerance: +0°C, –4°C

    18 Gauge Solid Copper Wire

    Full 1 1/3” leads to fit all replacement configurations

    Note 1: Temperature sensitive devices. Do not store above +48°C (+120°F).

    Note 2: Color Band does not denote temperature group.

    Note 3: The electrical resistance of the thermal cut–off is comparable to that found in an equal length of 18 gauge solid copper wire. With proper air flow, heat generation below 15 Amps is minimal, above 15Amps the upper limit on the currentcapacity will depend on the environment for each specific application.

    Note 4: A general rule of thumb for continuous operating temperature for thermal cut–offs is 30°C less than the Maximum Opening Temperature.

    TCO-D085 PRGR 87 C.

    Alternate: NTE 8085

     

    Learn More
  24. Stemco - 402-2531 L170B-8 - Thermal cutout.
    Stemco - 402-2531 L170B-8 - Thermal cutout.
    Special Price $5.95 Regular Price $8.95

    Thermal cutout. NC 15Amp, opens at L170. Male 1/4" QC 1.7" apart, mounting slots 1.7" apart.

    Learn More
View as List Grid

Items 1-24 of 87

Page
per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.