Optoisolators

IC. CCD SENSOR CCIR TV STANDARD. 576V x 604H Pixel count Area CCD Image Array - Frame Transfer Sensor CCIR Std Vertical Pixel Dimension (m) = 15.6u. Horizontal Pixel Dimension (m) = 10u. Horizontal Dimension (m) = 6.0mm. Vertical Dimension (m) = 4.5m. 20V, 150mW. Package: 24 Cdip, gold leads. Learn More

On Semiconductor - FAIRCHILD - MOC3023M IC, Optocoupler.

Triac driver output.

Case/Package: DIP 6

Forward Current: 60 mA

Forward Voltage: 1.15 V

Hold Current: 100 µA

Input Current: 60 mA

Isolation Voltage: 5.3 kV

Max Input Current: 50 mA

Max Input Voltage: 1.5 V

Operating Temperature : -40 C to 85 °C

Max Power Dissipation: 330 mW

Nominal Input Voltage: 1.15 V

Output Voltage: 400 V

Reverse Breakdown Voltage: 3 V

Turn-On Delay Time: 20 µs

Dimensions: Height 3.5 mm, Length 7.3 mm, Width 6.5 mm

Learn More

PhotoTransistor. T1 3mm package. Peak sensitive wavelength: 860nm. 100mW Visible & NIR - near infrared. 30Vce 5Veb 0.4Vce(sat) Tr,Tf: 15uSec Iceo(dark)100nA. Ic(on): 0.16mA(minimum), 0.4mA typical. PT202C is a high speed and high sensitivity silicon NPN epitaxial planar phototransistor in a standard 3mm package. Due to its water clear epoxy the device is sensitive to visible and near infrared light. Package of 50. More info: http://www.everlight.com.ua/pdf/ir-transist/PT202C.pdf Learn More

Photo-diode. Breakdown voltage: 30V. Responsivity: 905nm. Package: TO-5 hermetically sealed, large glass window. Note: Alt P/N: 10786-02. Texas Optoelectronics Inc. Learn More

IC, optical. Area CCD Image Array - Frame Xfer, EIA TV Std. Vertical pixel count = 490. Horizontal pixel count = 610. Vertical pixel dimension (m) = 18.6u. Horizontal pixel dimension (m) = 9.9u. Horizontal dimension (m) = 6.0m. Vertical dimension (m) = 4.5m, Vsup nom.(V) supply voltage = 20, 150mW. Case: 24 Cdip gold leads. Learn More

OPTEK - OPL9071 Photologic sensor.

Package: TO-92-size three leads.

Package of 5.

Learn More

General Instruments - 6N138 IC, Optocoupler.

High Speed

Low input Current

Photodiode Darlington Output.

Double marked MCC670.

Package 8 Dip, Used/Removed from equipment. Package of 25.

Learn More

Texas Instruments - TIL149 Sensor, Reflective Detector.

Reflective source and sensor.

Optical switch assembly.

Discontinued and Difficult to find.

NSN 5840-01-111-8238

Alternate: Honeywell HOAO149-001 

 

Learn More

Image sensor, pixel. Charged coupled device (CCD) 1158X488/ High resolution. Package: 22-Cdip gold. Spec sheet avail upon request. Learn More

Mirror Galvo's for Honeywell's decades old Visicorder high-speed Chart recorders. Uses reflecting light beam off tiny internal mirror of 3.8" long -0.25"w Galvanometer, 350Hz. Dimensions: Overall: 3.775" long x 0.906 high x 0.248" thick. Learn More

EG&G VACTEC - VTB8441BH Photodiode.

The VTB8441BH is a blue enhanced Silicon Photodiode on 8mm ceramic substrate coated with IR blocking filter having a 5.2mm² active area designed for spectral response between 330 and 720nm. This series of P on N Silicon planar photodiode has been designed for optimum response through the visible part of the spectrum. This photodiode is primarily intended to be used in photovoltaic mode but may be used with a small reverse bias. It also been designed to exhibit very high shunt resistance, a characteristic which leads to low offsets when used in high gain trans-impedance op-amp circuits.

Spectral range: 330-720nm.

Dark current: 100pA.

Number of Pins: 2

Wave Length: 580 nm

Current Rating: 5 A

Voltage - DC Reverse: 40V

Open Circuit Voltage: 420mV.

Operating Temp: - 20 C to 75 C

Package: case 21F, 8mm ceramic (recessed).

Note: Silicon Planar.

Learn More

Opto devices in a reflector package, 2 radial leads each side. Marked 5616662 and EC871000 Learn More

100K MAX RESISTANCE PHOTORESISTOR8-OCTAL LG GLASS ANTIQUE Learn More

IC. Area array charge-coupled device (CCD) image sensors. Case: 20 Ceramic Dip, heavy material. Used/RFE/Removed from equipment. Learn More

Optical sensors. Side-viewing. Package: TO-92-size three leads. No other info avail. Learn More

photo electric control mod mod dual ttl 115vac Learn More

FAIRWAY LINE PROJECTOR

Learn More

Optical IC. Transmissive optical sensor with phototransistor output. Gap: 2.8mm. Operating wavelength: 950nm. Dimensions: 4mm high. Mount: PCB. Application: Position sensor for shaft encoder. detection of opaque material such as paper, IBM cards, magnetic tapes etc. Limit switch for mechanical motions in VCR. Learn More

ITUWA - N-110-2 Resistive Neon OptoIsolator, Photoconductor, Photoresistor, or Vactrol. Resistive Opoto-Isolator (RO), also called photoresistive opto-isolator, or Vactrol. Analog opto-isolator or lamp-coupled photocell, is an optoelectronic device consisting of a source and detector of light, which are optically coupled and electrically isolated from each other. An Opto-Isolator is an electronic component that transfers electrical signals between two isolated circuits by using light. Opto-isolators prevent high voltages from affecting the system receiving the signal. Status: Discontinued, New Old Stock High Isolation Voltage Optocoupler Radial Leads, PCB Mount Also known or referred to as an Optical Coupler or Transistor Relay. Neon 2K Ohms ON, 10Meg Ohm OFF, Slow Decay. Resistance Slowly Increases after 110V (100KRes) Power Removed Case: Radial 4-lead upright, similar shape as a radial capacitor. Approximate Dimensions: 0.4” Diameter, 0.7” Height. Made in Japan – Rare - Difficult Component to Find. Similar VTL and Clairex CLM Series Applications include: TTL logic control of AC power, Direct relay substitutes for AC drive, Power line circuit Isolation. Learn More

IC. Optoisolator. House numbered DB653001. Package: 8 Dip. Learn More

EG&G/JUDSON - J16-18A-R01M Photodiode assembly/board.

Board numbered YL-E-0048.

Germanium, 1mm detector 1300-1550nm soldered on small boards.

Board has an OP07AZ, a CA3140AE and a 10K Ohm trimpot.

Contacts: 3 wire leads attached to a 3 pin male Molex connector.

Specification Attached and hard copy available upon request.

Learn More

Laser HOUSING 1"ID-Round 6.6"Long overall - Complete with Two right angle mirrors and Two round glass Lenses - 2-Piece Black Plastic - NO laser included Learn More

TE Connectivity AMP INC - HOA6901-001 - Optical Sensor Cable, Fiber Optic Link.

Two pin device at one end, 3-pin device at opposite end.

Both devices are socketed.

Overall length: 10 foot.

Cable diameter: 2mm.

New Old Stock 

Learn More

IC, optocoupler. Phototransistor output, 5.3 kV TRIOS. low current input. Package: 4 Dip. Learn More