Temperature Sensor

Thermtrol/Klixon - 7AM Series Thermal Switch - 7AM205A5-823 - 90C Switch, Thermal. NC Cut-Out.

Klixon 7AM thermal protectors prevent overheating in a variety of consumer, industrial and commercial products. It is a miniature, snap-acting, thermally operated device that is a proven performer in protection technology. 

Thermitrol or Klixon (Devision of Sensata) 7AM Series Snap Action Thermal Switch. 7AM205A5-823 Normally Closed contact opens at 90 Deg C. (194F) Mount: PCB, 2 pin, Radial Leads w/1/4" nickel leads. For overcurrent and overcharge protection.

Dimensions: 43" wide x 0.80" Long (0.952 high including leads) x 0.2" deep. Current Ratings 16 VDC @20 Amps, 115VAC @ 22Amps, 277VAC @ 8 Amps, 600VAC @4 Amps. Good for several amps and 120 Volts.

In order to achieve optimum heat transfer from the protected medium or ambient to the thermostat, the 7AM has been designed with the case connected to the bimetallic disc. This feature makes it necessary to electrically insulate the 7AM from the mounting surface. 

Applications: Battery Packs, Battery chargers, Permanent Split capcitor motors, Shaded Pole Motors, HID ballasts, Florescent lighting ballasts/transformers, Vacuum cleaners, Recessed lighting fixtures, Automotive accessory motors/solenoids ect.. - PC boards.

More information: 

UL/CUL Approved

Learn More

Stemco - 402-396 L200H7 Thermal Cutoff Switch. Normally Closed L200, 170 Degree.

Bi-Metalic Disc, Snap Disc, or Snap Switch thermostats are bimetal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps” from a convex to a concave shape at a set temperature. When the disc “snaps”, it either completes or interrupts a circuit. Snap Disc thermostats have many practical applications. They are used to ensure the process temperatures do not exceed the thermal limits of the equipment or process. The most common application for a snap switch or snap action thermostat is as an over-temperature protection (or OTP) failsafe.

Because of their small size and low mass, the response time of the snap switch design is extremely rapid compared to other commercially available thermostatic devices. Additionally, the bimetal element of a Snap Disc does not carry the current, but acts as the force to open and close the contacts. Thus snap action thermostats have a long life at relatively high currents – up to 16 amps for the ½ inch series – making snap switches the first choice of many OEMs.

Stemco 402 Series Automatic Snap-disc Autou Reset Thermostat.

Thermal Cutoff. Normally Closed SPST Switch L200, 170 Degree.

Mount: Surface, Two slotted mounting holes 1.65" apart.

Current/Voltage Ratings: 15A, 120 VAC 

Male 1/4" lugs spaced 1.75" apart.

Life: >100,000 Cycles

Proudly Made in USA

Applications for Disc Thermostats include: Coffee Makers, Washer & Dryers, Dishwashers, Electric Heaters, Ovens, Gas Furnaces, Fireplaces, HVAC, Electric Signs, Greenhouses, Pool Systems, Freezers, Refrigerators, Spas, Vending Machines, Security Systems, Motors, Light Fixtures, Power Supplies, Microprocessors, Business Machines and Table Top Appliances.

Learn More

ANZEN DENGU CO. LTD - V086  Fuse, Thermal Cutt-off.

Voltage: 250VAC 2Amp / 50VDC 4Amp.

Rated functioning temperature: 174-181F,  81+/-2 deg C and below.

Temperature cutoff: 86C / 187F.

TM: Max temp at which no reconduction will be caused for ten minutes: 95C.

Dimensions: <3mm D x 9mm long with 2 long leads, 68mm wire leads.

Trademark: TAM UL CSA VDE BEAB.

Package of 10.

Applications: Electric home appliances, electric industrial equipments, office automation equipments, plain paper copiers, transformers, motors, etc.

Learn More

THERM-O-DISC - 36TX22 F223-45F

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap–action of the bimetal disc provides high–speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC, and 16 amps at 250VAC. The 36T carries global agency recognition and is used in a wide range of applications including coffee makers and other small appliances, gas furnaces, clothes dryers, and dishwashers.

Thermostat, Thermal Cut-out. Normally Open Contact (NO).

Two male 3/16” (4.8mm) Quick Clade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Mount: panel, round 17.7mm with 24mm centers and has (2) male 4.8mm quick connects which can also be soldered to.

The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC. 

Normally open Contacts closes at 223 F and opens when the temperature drops to 178F. 

Flange mount 1/2" Bimetal Disc switch.

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

Thermistor, micro. 1 Meg Sensichip. Package: bead, small with radial leads. Learn More

Thermistor. 4.5 Ohm at 25 Deg C / 2.96 Ohm at 60 Deg C. Package: 8.2mm round bead with radial leads.

Learn More

Thermistor. 10K ohm. SMD NTC 1012. Tolerance: +/-5%. Number of Pins: 2. Beta:3964K. Beta lower temperature: 25C. Beta upper temperature: 75C. Leaded process compatible and RoHS compliant. NTHS-1012N01 10K 5% E06 e3. Learn More

Switch, temperature. Thermistor - temperature dependent resistor, which measures 12-14 ohms resistance at room temp 68 Deg F. Package: 12mm disc, radial leads. Learn More

Switch, thermistor. THERMISTOR 1380-OHM (E53) DWG# 9RT1H266 (which we don't have) Learn More

Cutler-Hammer / Eaton - 10172H- 10172H 334A - Thermal Overload Switch

Status: Discontinued

Pilot Duty Ratings: 115-230 VAC, 30A

Body Approximate Overall Dimensions: 2.2" x 1.95" X 1.0"

New Old Stock - This Item has no Shelf Life

NSN 5925-00-783-5581

Made in USA

Learn More

Temperature Sensor with cable, used on digital thermometers on boats & RVs - Learn More

MINCO PRODUCTS - S3082N80Z36 - Temperature Probe / Thermocouple.

Minco temperature sensors deliver reliable, accurate, repeatable and cost-effective temperature measurement across a wide variety of highly specialized uses in a variety of markets including medical, aerospace, power generation, industrial, commercial and more. Minco’s advanced temperature probe technology comes in multiple standard and custom-engineered configurations to meet any combination of requirements including sensing element type, temperature range, thermal response time, vibration resistance and mounting method. 

Allows immerse in water, steam, or other liquids and gases.

Measure the temperature of fluid, gas, or gel in industrial applications and production environments.

Resistance: 650 Ohm (670 Ohm at room temperature PTC), (Resistance raises with temperature).

Material: 316 Stainless Steel. 

Connector Type: Bare Wire

Dimensions: 0.188: OD (4.7mm) x 8" long.

Applications: Appliances, Duct, Food and Beverage, HVAC, Ovens, Packaging, Pharmaceutical

New Old Stock

Made in USA

Learn More

Switch, thermal. Thermistor 40 Ohm. Resistance increases with temperature rise. Dimensions: 11mm D x 4mm thick. Learn More

IC. Precision temperature sensor. Package: TO-46 metal can. Learn More

Transmitter, RTD. 2-wire. Supply: 10-50VDC.

Learn More

Switch, thermostatic. 130 Deg F. Tolerance: 1%. Package: glass cylinder with 2 radial leads. Note: Thermostat. Learn More

Thermistor. Resistance: 33K Ohm. Tolerance: 5%. Type NTC. Series 2381. Package: radial leads. Dimensions: 3.3mm D x 24mm long x 3mm high. Learn More

National Semiconductor Corp - LM34CH Sensor, Precision Temperature.

The LM34 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Fahrenheit temperature.

Status: Discontinued

Calibrated directly in degrees F. Linear +10.0mV/deg F scale factor.

1.0F accuracy guaranteed (at +77F).

-0.5 - 3V

Range: -50 to +300F.

Suitable for remote applications.

Package: TO-46 metal.

NSN: 5905-01-366-1770

Learn More

National Semiconductor Inc - LM335H - IC.

Precision Temperature Sensor.

Local 40 C to 100 C10mV/ K

Accuacy: +/- 6 C (+/-9F)

Package: TO-46 Metal Can.

Note: National Semiconductor is Now Texas Instruments

Genunine National Semiconductor - New Old Stock

Learn More

Duct mounted temperature to period transducer with 18" probe. Learn More

Honeywell Fenwal - 192-303QET-A01 – 30K Ohm, 10% 5905-01-291-3170 NTC Thermister Product Category Type: NTC Thermistors Series: 92 B Parameter: 4261 K Resistance: 30 kOhms Power Rating: 750 uW Tolerance: 0.2 % Mounting Style: PCB Mount Termination Style: Radial Minimum Operating Temperature: - 60 C Maximum Operating Temperature: + 150 C Package / Case:Bead Diameter: 2.413 mm Length: 38.1 mm Unit Weight: 0.001764 oz Learn More

Thermostat/Thermistor. Each with attached 2 Conductor teflon wire 6". Learn More

BARBER COLEMAN - 10EV0J00-000-0-00 - Series 10 Temperature Controller with LED Readout.

Dimensions: 2.0" x 3.8" x 5.0"   (5.1 cm x 9.5 cm x 12.7 cm)

Weight: 0 lbs 9.9 oz (0.3kg )

Complete with manufactures instruction and hardware kit.

Made in USA

New

Learn More

ASHCROFT - 30EI60R - 91833 - 50-EI60-E025 0/250F - Industrial Thermometer, Bimetal 5".

The stem on these dial thermometers are mounted on the back. They thread onto pipe or tank connections and measure and monitor temperatures.

Range: 0-250F.

Face: 5" Diameter.

Accuracy: 1%

Case Material: Stainless Steel

Stem Material: 304 Stainless Steel

Window Material: Glass

Connection Location: Back

Type E1.

Connection: 1/2" NPT, every angle.

Stem Length: 2-1/2".

Range: 0 Degrees to 250 Degrees F

Made in USA

New In Manufacturer's Packaging.

Learn More