Transformers

Transformer Ultra-miniature 1-3 100UH 1.2-Ohm 330ma 6.8KHZ Double marked TF5R20ZZ PCB mount 3-Leads New http://www.picoelectronics.com/plugin/pe57_59.htm?PartNo=62392 Learn More

Factory new 4-Pin PCB mount TransformerMilitary/Industrial miniature. TAMURA is MICROTRAN. Learn More

New PCB mount transformer 6-Pin board mount Learn More

Dual 12V Miniature Transformer 8-Pin PCB Mount Low Profile Learn More

Dual 12V 0.2Amp Miniature Transformer flat-pack 8-Pin PCB Mount Learn More

Minature PCB mount transformer Learn More

Micron Transformer - B100WZ13RK – Transformer, 100VA, 0.87 Amps, Primary: 550/575/600V | Secondary: 110/115/120V ImperviTRAN® is the standard, reliable industrial control circuit transformer. This is the most accepted transformer in the industry! • Epoxy encapsulated coils • Secondrary fuse cilps where applicable • Molded-in terminals and phil-slot screws • Optional primary fusing • Molded terminal barriers Micron Control Transformers Class 105C/130C/180C running at 50 VA with primary voltage at 550/575/600 and secondary voltage at 110/115/120. SEMS screw terminal strips as an integral part of the coil bobbin • Allows bare wire and terminal connection methods • Easily adaptable to slot, Phillips and hex driver tools • Robust physical support instead of “floating” terminal strips UL/CSA Family Listing • Absolute flexibility of design for 600 volt class product Fully encapsulated coil • Tough environment-proof construction • Eases wire routing around the transformer Integral accessory mounting plate on transformer top • Allows field modification to block-style primary fusing without clip kits • Reduces SKU count for fused/non-fused applications • Provides mounting platform for additional items (DIN rail, terminal strips) Standard strap brackets or optional mounting plate with angled slots • Features a superior weld result for vibration-resistant stability • Offers common mounting template across a wide range of VA sizes • Alternate plates available for OEM volumes Fusion-welded coil terminations instead of solder joints • Eliminates cold solder joint breakage, improves conductivity • Provides a lead-free RoHS compliant construction Face-on terminal labels with large schematic indicators • Terminal designations clearly visible to the installer and technician • Indicators aligned with terminal screws for clarity Mount: Panel. - Weight: 4.2 lbs. Learn More

Transformer, power. 4.8VA. Pri: 115V 50.60Hz. Sec: 24VCT 0.2Amp. Open frame. Mount: Panel. Dimensions: 2.375" long x 1.375" wide x 1.375" high with 1.750" mount centers. Rohs compliant. Learn More

Transformer Military New small. Learn More

Transformer. 0.15KVA 1PH 60Hz. Primary: 120/240V. Secondary: 12/24V. Type QB. Dry type. Mount: Panel. Dimensions: 4.5" wide x 7-1/8" high x 4-3/16" deep. With mount flange: 6-1/8" wide x 7-1/8" high. Weight: 10.692 lbs. Made in the USA. Learn More

Transformer, current. Ratio 80:5 A 50-400Hz 600V ins. Class 10KV BIL. RF 2.0 ACC. Class 2% 2VA. Learn More

BENDER GmbH - W2-A70S - CURRENT TRANSFORMER (Messwandler), FOR RCMA470LY.

ID:2.75"

Un=AC 690V

Uisol=3kV / 6kV (IEC185)

Kn1=Kn2=3 / 0.012A Class 3

0-150Hz

4.5"x5.2"x1.25"

Made in Germany

Excellent Condition - Used / Removed from Equipment

Learn More

Calrad - 45-724-L - Transformer, Audio.

Matching Transformer

25V 20 watt.

Open Frame, 9 wire.

New.

Learn More

SIGNAL TRANSFORMER INC - 10-BR - Transformer, Hardware Bracket.

Mounting Bracket CRS Galvanized Steel used in conjunction with a variety of our Power Transformers

Dimensions: 1.64" x 1.12".

applications: use with  Signal's 24VA size PC, DP, MPC andDMPC series transformers.

New.

Learn More

8600B01P-1 Transformer.

For a Switching Power Supply.

Case: Shielded.

Mount: PCB 8 Pin.

Dimensions: 1.086" D x 0.824" above board.

 

Learn More

Renco Electronics - RL-9466

Transformer, current.

Mount: PCB 10 Pin.

Dimensions: 0.732" long x 0.650" wide x 0.583" high. 

Learn More

Calrad - 95-876A - Audio Equipment.

CB Alternator and Auto Stereo Noise Eliminator Kit.

Helps eliminate unwanted alternator and general ignition noise, 7amp. A two (2) wire Choke/Coil. and one electrolytic capacitor 220uF 25V, axial (85 Degree C).

Mount: Panel.

Dimensions: Transformer 1.694" long x 1.113" wide x 1.439" high.

Overall with mount feet 2.343" long, with 2" centers.

New Old Stock.

Complete with manufactures installation instructions.

Learn More

Transformer, audio. 15 Watt. Inductance: 36uH - 40uH. Ratio 1:1. Output: 12V 1.25Amp. Mount: PCB SMD. Dimensions: 17.75mm long x 13.46mm wide x 12.32mm high. New. Note: Audio & Signal. Flyback. For For Si341, Si3402.

Learn More

Signal Transformer - LP40-300 - Power Transformers.

[email protected] [email protected]

Dual Pri- semi-toroidial. 115V/230V 50/60 Hz

Mount Through Hole

Weight 310 g

Max Output Current: 300 mA

Max Power Dissipation: 12 W

Output Power: 12 W

Primary Winding(s): Dual

Secondary Winding(s): Dual

Termination: PC Pin

Dimensions: Height 27.1 mm, Height - Seated (Max) 27.1 mm, Length 63.5 mm, Width 50.8 mm

House numbered 1071-21.

Package: Flatpack PCB mount or Invert (2.5 X 2.0 X 1.065") 12 OZ

Learn More

SIGNAL TRANSFORMER INC - 12-1010A-LPI

Signal’s LPI series are transformer which utilize unique insulating techniques including full encapsulation to meet international safety requirements. These transformers are ideal for low power applications where minimum height and reduced magnetic radiation are required.

"Flathead" - Low Profile International Transformers

Primary: Universal Semi-Torodial 115/230V 50/60 Hz

LPI Series Direct Plug-in Replacment for the Original flathead Desgn

Secondary: Dual 200V @ 0.018AMP and 15.94V @ 18mAmps

Encapsulated in order to meet harsh environmental conditions

Rigid pin construction for easier board insertion and higher reliability

Mounting holes provided for greater resistance to shock & vibration

Improved electrical characteristics - regulation, temperature rise and efficiency.

Reduced magnetic radiation

Voltage Isolation: 4000Vrms

Dimensions: 55mm x 67mm x 27mm Universal 

Weight: Approximately 12 Ounces

PCB Mt Transformers

Connections: 8-pin

Molded Frame/Enclosed

Factory New

Approvals: UL, CSA

Made in USA

Learn More

Reliance Electric H&H TW CO - H0942B 44VCT@13Amps & 24v @ 2.5A 

PRI: 120VAC, Single Phase.

Open Frame Style 5 1/4"W x 6 1/4"D x 4 1/2"H.

Doubled Marked 610295-01A

Weighs 24lbs.

Packages over 5 lbs. require additional shipping charge dependent upon destination.

Note: May have Surface Rust on the transformer.

New Old Stock 

 

Learn More

500-Ohm pri 200-Ohm sec primary dc resist 36-Ohm2nd 14.4-Ohm Turns radio 1.61:1 Core must have grounded mounting strapPri ind by red dot less than one inch pcb mt Blue Learn More

VITEC - 12Z4906 - Transformer, Control. Pulse.

Designed specifically for industrial control and general purpose applications.

Epoxy encapsulated in a small pre-molded case gives superior humidity resistance.

Provides low-noise operation of high power SCR resonant inverters.

Meets design requirements of most Sine wave inverter circuits

Operating temperature: -40 C to +125C

Peak working voltage:175 Volts per MIL-T-21038

Dissipation rating: 0.3 Watts at +25C

Ratio 1:1

Mount: PCB.

Package: 4 Pin Molded case.

More info: www.viteccorp.com/data/c104.pdf

Learn More

Wabash - 5161 Transformer, PCB.

Input 120V.

Output 28V 100mA, 14V 50mA.

Mount: PCB.

Package: 5 Pin.

Dimensions: 1.5" long x 1.14" wide x 1.209" high

Listed: UL/CSA.

Learn More