Special Switch

Three phase 60Hz enclosed variable frequency drive bypass system. Inverter Bypass With Overload Protection. 200/208 = 7 1/2HP / 240V = 10HP / 480V = 20HP / 600V = 20HP OVERLOAD AMP RANGE = 22-27 AMPS - Learn More

Switches, Proximity. Demonstration Kit containing 15 items from the E51 switch line. Rugged construction is ideal for industrial environments. Viton� gaskets ensure a positive seal and high resistance to industry chemicals. Direct replacement for worn out limit switches. Sensor heads and bodies feature captive screws to eliminate loss. All sensor heads include a selector switch to program output function to either N.O. or N.C. Sensor bodies feature bifurcated engagement prongs for a reliable connection when plugging into receptacle stabs. Sensors accommodate both U.S. and DIN mounting dimensions. Wiring terminals feature captive pressure plate saddles for #18 to #12 AWG wire. Logic modules are available to provide additional control function. Case contains: E51SAL, E51DT1, E51RA. E51SAL, E51DS1, E51RAP3. E51RN. E51SNL. E51SPL. E51DS1. E52RAL12T111. E51DS6. E51DT5. E51DT7. E51DT8.

Learn More

Eaton - Cutler-Hammer - AN3023-9 - 8713K14 Switch, Toggle.

Contacts: DPST.

Contact Ratings: 20Amp.

Actuator: On-Off(Mom).

Normally Closed.

Connection: Screw Terminals.

Mech: Panel with 2 holes 1.85" centers.

Body: Flange 2.123" long x 1.262" wide x 0.046" thick.

Overall 2.123" long x 1.5" wide x 0.953" high plus contacts.

Note: Double marked AN3023-9 and ST55L.

NSN: 5930-00-548-5328

Genuine Vintage Cutler Hammer - New Old Stock

Made in the USA.

Learn More

Mopar - Chrysler Dodge Plymouth  -  Heater  - Blower Motor Switch, Rocker, Automotive.

Actuator: 4 Position (Off is Open, LO=C TO L, MED= C TO M, HI=C TO M + HI).

Connection: (4 Terminal) Male Quick Connect terminals.

Body: Overall 1.316" long x 1.448" wide x 1" behind panel.

Actuator extends to 1.571" above assembly.

Note: Blower Motor Switch.

Mounted on a plate 1.316" long x 1.448" wide.

Vintage - Genuine Chrsyler Dodge Plymouth - Factory New Old Stock

Similar to 3502681 (1970's Vintage)

Alternate Appplications - Hobbyist Motor/Fan Control

Learn More

C & K Components - 3U0210L02 - Switch, BCD.

Pushbutton 0-9,

1 Amp,

Two Tiny Pushbuttons: Up or Down

Snap-in front mount.

Gold-plated contacts & PC board.

More info: http://www.ck-components.com/3/thumbwheel,10595,en.html

Learn More

Cutler-Hammer / Eaton - 10172H- 10172H 334A - Thermal Overload Switch

Status: Discontinued

Pilot Duty Ratings: 115-230 VAC, 30A

Body Approximate Overall Dimensions: 2.2" x 1.95" X 1.0"

New Old Stock - This Item has no Shelf Life

NSN 5925-00-783-5581

Made in USA

Learn More

Eaton -Arrow Hart - AH7810-UD - Motor Controller, Manual Contactor

Industrial Grade Manual Motor Controllers

Phase: 3 Phase

Poles: 3 Pole

Amperage: 30 Amps

Voltage: 600 VAC

Termination Style: Front Wired Screw

Max. AWG Wire Size: 10 AWG

HP Rating: 7.5@240VAC, 15@480VAC, 15@60VAC  

Dimensions: Height 1.7" X Width 3.7" X Diameter 2.6"

Positive-contact design enhances fast-make/slow-break

Silver-alloy contacts for maximum conductivity and service life

Back and side wire terminals accept up to #10 AWG solid copper wire. For stranded #8 AWG wire, remove terminal clamp and use ring terminal

Oversized #10 triple-combination terminal screws are vibration resistant

All molded parts are thermoplastic to resist impacts, chemicals, temperature, tracking and arcing

Insulating barrier between terminals provide isolation from each phase

Nickel-plated brass mounting yoke for superior corrosion resistance

Large toggle provides positive actuation, even with gloved hand.

Note: Arrow Hart P/N 7810-UD changed to AH7810UD following acquisition by Eaton. 

High Quality Commercial - New Old Stock.

UL Class: UL508

Proudly Made in USA

Learn More

MSTO1AH MANUAL TOGGLE MOTOR STARTER, 1 POLE, 1HP WITH Crouse Hinds ENCLOSURE

Learn More

TR-11236 Transformer.

Input X1 & X2 = 120 VAC

Output Hi & H2 = 36VAC 250mA.

Mount: Chassis, Open Frame, 4 wire.

Marked: 64977-93-S

Dimensions: 2-1/3" wide x 2" deep x 2" high with 2-7/8" mount centers.

NSN 5950-00-804-4379

Learn More

UID - 3-098 Switch, Push-Pull slide.

Status: Discontinued

Contacts: Two Position.

Actuator: Illuminated.

Lamp Voltage: 28V.

Connection: PC Pins.

Mechanical Mount: PCB.

Note: Ultra Red Glow.

Two way action meaning there are two axis it can be activated from.

Dimensions: 0.903" long plus actuator x 0.939" wide x 0.4" high plus slide and tab (0.28" high).

New Old Stock

 

Learn More

TUNG-SOL - 195S4S - Flasher, Sterling Fire Alarm Co. Thermal Flasher.

Used commercially as well as on numerous Antique Vehicles

1930 1940 1950 Ford Pontica Buick Chevrolet Tung Sol 12 Volt Flasher

Flasher 12VDC, 2 wire. Old Style bi-metal flasher. Rated for 50 candlepower bulb. 

NSN 5945-00-873-9126

Alternate: 5945-350-0065,  03148-PP-60-A3-AS, IC-6-5/60

MIL-B-121A Packaged.

Made in USA

 

Learn More

T-BAR - 801-12C28 Power Relay. DC.

The 800 series Dust-Tight Relay is protected against normal ambient dust conditions. It is designed for use in controlled environment such as test areas and network management centres. It is used for control interlock and indicator circuits. The connectors are a vital part of T-Bar switching technology. While T-Bar Connectors are recommended, all terminals of T-Bar relays and switches are solderable.

Coil: 28VDC.

Coil Resistance:258 Ohms

Mount: Chassis

Electrical Configuration: 12P2T.

Uses gold contact for parts.

Used / Removed from Equipment

Old - Sold As Is old AS-Is.

Learn More

Switchbank-in-a-Box ! 4-gang push button switch bank. Push one inand you cancel the others. All 4 Switches are DPDT-3Amp Leaf Switches by Switchcraft. Mounted in a nice new aluminum box 4.2"W x 2.1"H x 6"D Terminated in a DB-25P(APP. 4.25"wide x 5"deep x 2"high. ) with a male DB-25 Connector on back. Learn More

ITT Schadow Switch, Pushbuttons.

Two Individual Latching pushbuttons on a metal plate measuring Approximately 2" x 1-3/8".

One switch is a two position 6PDT and the other is DPDT.

PC Terminals on one side and solder terminals on the other.

Selling cheap because the precious metal (Silver) is starting to tarnish.

Cleanable Tarnish - New Old Stock.

Proudly Made in USA

Learn More

Schurter SWM1 Rotary Impedeance Selectro Switch. 

Contacts: 1P3T (One pole 3 position) A-B-C.

Contact Ratings: 10Amp 250VAC/6.3Amp 250VAC. IP40

Connection: Solder Terminals.

Contact resistance <10 mOhm at 20 mV 

Mount: Screw-on mounting

Material: Thermosplastic, Black ULV-0

Mech: Panel, single hole 0.777" (19.7mm) D, threaded.

Panel hole: 24.5mm D x 2.1mm in front of panel.

Note: Coin Operated, Flush.

Approvals: VDE, UL, CE, IEC, CSAReach

Alternates: P-H1701, CED-P-1701, 0033.40XX

applications: Serieo equipment, Speakers, Voltage Selector, Impedeance Selector, 

Replacement Impedance Selector Switch fits the following models: Deliverance One Twenty Head,

Deliverance Sixty Head & Combo, Pittbull Ultra-Lead & One Hundred, Pittbull Hundred/CL, Hundred/CLX,

Pittbull Classic Head & Combo, Pittbull Fifty/CL, Pittbull Fifty/ST Head & Fifty/Twelve Combo,

Pittbull Forty-Five Head and Combo, Pittbull Super Thirty Combo, Two/Ninety/Two Power Amp,

Two/Fifty/Two Power Amp, Twenty One Hundred and Classic Power Amp, 2150 Power Amp

Learn More

NURSE CALL STATION SWITCH WITH RECESSED BUTTON & A RED & WHITE IND. LIGHT. MALE 7 PIN DIN CONN. ON END OF A 6' 7COND. WHITE CABLE.the switch is a spst n.open. there is also a 2"speaker in the case Learn More

Switch, rotary. Contacts: 6PDT, Iridium. Actuator: Side-mounted 1/4" shaft. Elect config: non-shorting. Body: approx 4.5"L x 2.8" x 1.3" . Panel hole: 3/8" threaded bushing. Note: Two-position, maintained. Very heavy duty Learn More

MAXI-SWITCH - 5 Station Bank Assembly.

Maxi Switch Push Button Switchbank, 5 Station/Position Assembly, SPDT with Electro-Mech Lock to prevent accidental change. Self cancelling. Self cancelling, 5Amp 250VAC with Plus Magnecraft 24VDC Solenoid lock. Five numbered Push Buttons.

The Assembly consists of the following major parts. Component parts value exceeds $100.

Five Honeywell/AMP or equivalent 311SM4-T Subminiature snap-action switches, Mechanical life 1,000,000 Cycles, 5A Switches 250VAC, 30VDC, SPST Roller Lever, Contact Material Gold plated Silver, 638X6.4X14.5mm, -55C to 125C, CSA, UL RoHS Compiant, Max Operating Force:0.39N; Series:SM; Switch Case:Phenolic

One AMP/TE Connectivity 201355-1 M-Series, Male Connector Housing, Phenolic-GF, 3.81mm, 14 way, 3 row connector. Cable Mount, For use with Female Block 201298-1

One Magnecraft Relay Solenoid 11-X-609, 280 Ohm, USD 2400317

Used/RFE/Removed from equipment - Excellent condition.

Old Overstock Assembly containing many difficult to find components.

Over 400 Sold.

Learn More

MICRO SWITCH - 37XL11XC-02 - Switch, with Roller.

Hall-Effect 37XL11XC-02 mounted on right angle bracket.

Three switch leads have been unsoldered.

Used but Guaranteed.

Learn More

Honeywell/Microswitch - PTY2091 - PUSH / PULL 2-Position Maintained Switch Assembly Model-B

2 Position Maintained Contacts

Industrial, Full Voltage

Applications: Safety Emergency Stop/Start Switch

In Manufactures Packaging with Installation Instructions

UL CSA Approved

Note: Lens Cap Purchased Separately

Alternates: Senasys PTY2091, ITT G330207-1, NSN 5930-01-244-0512

Proudly Made in USA

Learn More

FORD - 3-022 - Switch, Toggle.

Contacts: 4 Position (3 Position Plus Off).

Connection: 4 Wire, 6".

Mech: Panel.

Body: 34.6mm long x 19.1mm wide behind Panel.

Heavy Duty Bracket & 4 Pin Connector

Above panel 36.4mm long x 20.2mm wide x 45.5mm high (including actuator).

Note: Blower Motor Switch.

Genuine Ford - New Old Stock - Vinatage

Learn More

EAO SWITCH - 704.602.7 Clear Jewel Cover

Round, Colorless Transparent

For EAO Pushbutton Switches 14.131.022

0.935" dia.

Alternates: Digi-Key 1948-2052-ND, Newark 91B4261

Learn More

0-9 THUMBWHEEL SWITCH 9-pin BCD BM1-2-4-8/N side-stackable 1.8"hi x 0.5" wide 28"-behind panel including 9 long pins NEW IND PKG'D Learn More

Switch, trigger. Contacts: DPST. Contact Ratings: 16Amp 125VAC/8Amp 250VAC. Actuator: Locking. Connection: screw terminals. Body Dim: 1.817" long x 0.824" wide x 0.6" behind panel. Overall with actuator locked 1.623" high. Mech: Panel. Note: Metal actuator. Learn More