Circuit Protection

Sensata - AIRPAX - UPL15-3679-3 Circuit breaker.

1P 15Amp 65VDC, trip 18.8Amp.

1P 50Amp 50VDC.

Auxiliary switch/Remote 12VDC activated coil-special purpose.

Learn More

AIRPAX - UPGH12-5912-1 - Circuit Breaker w/Aux Contact, 2 Pole, 10 / 12 Amp, 250VAC. The APG/UPG Magnetic (Hydraulic Delay) circuit protector provides low-cost power switching, reliable circuit protection and accurate circuit control in one complete package. It is intended for use in data processing and broadcast equipment, vending and amusement machines, military and marine applications, and wherever precision operation is required. Status: Discontinued Mount: Panel Mount Actuator: Lever 2Pole, 10Amp and 12Amp 250VAC. UPGH - One Handle per Pole Delay 62F, 12VDC Auxiliary Coil. UL Recognized and CSA Certified New Old Stock Learn More

SENSATA AIRPAX - 205-11-1-62F-5A-103 Circuit Breaker with Dust Shield Protector.

Status: Discontinued - Sensata current production recommends IAL Series as a substitute. 

2Pole 10Amp 480VAC 50/60Hz.

Delay 62F. (Pulse tolerance: 20 times (approx.) rated current). Delay 62 is long enough to start
certain types of motors and most transformers and capacitor loads.

Trip Amp 12.5Amp.

New Old Stock

Learn More

Cutler-Hammer / Eaton - 10172H- 10172H 334A - Thermal Overload Switch

Status: Discontinued

Pilot Duty Ratings: 115-230 VAC, 30A

Body Approximate Overall Dimensions: 2.2" x 1.95" X 1.0"

New Old Stock - This Item has no Shelf Life

NSN 5925-00-783-5581

Made in USA

Learn More

Sola HD 23-22-112-2 120VA CVS Voltage Regulator.

Transformer, constant voltage. 120/240 VAC Primary: 95-130V x 190-260V 60 Cycle. Secondary: 120V 60 Cycle. 1Phase 120VA. Packed weight approximately 16 lbs. Height 8" (203.2mm), Width 4" (101.6mm), Depth 5" (127mm). 

Features
• Superior voltage regulation of ±1%
• Surge protection tested to ANSI/IEEE C62.41, Class A & B Waveform
• Harmonic filtering
• Hardwired
• Acts as a Step-up/Step-down Transformer
• Galvanic isolation provides exceptional circuit protection.
• 25 year typical Mean Time Between Failure
• No maintenance required

Applications
• Industrial automation and control equipment PLCs
• Analytical laboratory and factory automating equipment
• Photo processing equipment
• Sound/recording systems
• Photographic enlargers
• Broadcast equipment Related Products
• On-line UPS (S4K Industrial)
• Surge Protection
• Three Phase Power Conditioners
• Active Tracking® Filters

Note: Used / Removed From Equipment - With 120 VAC Power Input and Output Cords attached.

Learn More

Delta 02DBAG5 - EMI Line FIlter, General Purpose

2Amp 250VAC.

Filter Type: Single Phase

Voltage 115/250VAC

Current: 2 Amp

Inductance: 2.1 mH

Mounting: Chassis Mount

Termination: Quick Connect Flange

New Old Stock.

Listed: UR, CSA, VDE.

Alternates: Newark 99Y7779 

Made in Taiwan

Learn More

WICKMANN - 830 Fuse, Holder.

Shock-Safe 16Amp 250V. For 5 x 20mm fuses.

Material: Thermoplastic.

Voltage: 250V

Mount: PCB, Horizontal.

Dimensions: 1.262" (32.mm) long x 0.591" (15.0mm) wide x 0.597" (15.0mm) high.

Color: Black.

APPROVALS: VDE, SEMKO, UL, CSA

Note: Marked 19830, 2,5W/10A and 16A 250V.

Germany

Alternate: Littelfuse 83000000005

 

Learn More

Fuse Holders Clips, Open Design for 5 X 20mm fuses.

Material: Solid Brass.

6.3 Amp, 500 VDC/500VAC

Operating temperature: -40 C to 85 C

Mount: PCB.

New Old Stock

Alternates: 0751.0052, OG0751.0052, BK-6005

Package of 20.

Learn More

Circuit breaker. 3P 15Amp 415VAC. Mount: Din rail. Dimensions: 52mm wide x 85/90mm high x 65mm deep with toggle, 50mm behind panel. Contacts: screw. Note: New older stock. Learn More

No.28 (25A)U 415VAC 2-Pole-ganged DIN-Rail mounting 35mm wide x 85/90mm high x 65mm deep with toggle, 50mm behind panel - screw terminals Learn More

Filter, power outlet 6Amp 250VAC plus fuse holder. 48-440Hz. 3 Conductor male ac plug. Listed: UL/CSA. Learn More

Square D - AN3161P10 - Circuit Breaker.

Push Buton 10Amp.

Thermal Pop-out button.

Class 9311.

Panel Mount on 1.75" Centers.

Dimensions: 2 1/16"" by 1 1/2"" by 3/4"

Terminals: Screw.

NSN: 5925-00-254-2673

Vintage Old Stock

Applications: Boeing 707

Learn More

SIEMENS - 5SX21-C3 Miniature Circuit Breaker.

Status: Discontinued

1Phase, 3Amp,  230~400V.

Mount: Panel.

Mounts on 18 mm industry rail

Only 0.7" wide x 3.55"tall x 2".

Listed UL/CSA/CEBC/OVE, Circled "N", VDE.

Made in Germany

Cross: 5SX2-103-7

Note: Removed from Equipment / Used

Learn More

SCHAFFNER - FS3184-6-16 - Line Filters

110/250VAC 6Amps

Each with wiring harness

Note: Removed from Equipment

Learn More

Circuit breaker. 1P 5Amp 277VAC. Curve 2. Mount: panel.

Learn More

Potter USA - 600A10 Filter, EMI.

10Amp 250VAC.

New Old Stock.

Listed: UL/CSA.

Alternates: TE Connectivity 10VR1, 10VB6, 10ER1, 10VK1

Proudly Made in USA

Learn More

PANASONIC/MATSUSHITA - ECQ-U2A224MGCapacitor, MPF. 0.22uf 250VAC.

Case/Package:  Radial

Dielectric Material: Metallized polyester film

Case/Package:  Radial

Capacitance:      220 nF

Max Operating Temperature:     100 °C

Min Operating Temperature:      -40 °C

Tolerance:     20 %

Voltage Rating (AC):        275 V

Voltage Rating (DC):        909 mV

Dimensions: Height         9 mm,  Height - (Max)    18.0086 mm

Lead Diameter: 800 µm,  Lead Length     20 mm

Lead Pitch:          15.0114 mm

Length  17.5006 mm,   Width      17.5 mm

Standards: UL (UL1414). Across-the-line capacitors. Antenna-coupling and line-by-pass capacitors. CSA (Standard C22.2 No.1-94). SEMKO, DEMKO, NEMKO, FIMCO, VDE, SEV; IEC384-14. Lead spacing: 0.59" [15mm].

Learn More

NIKKO ELECTRIC - NW-1-S Circuit Breaker.

Status: Discontinued

0.8 Amp, 125V 60Hz.

Pushbutton Reset.

Mount: Panel Mount with Removable Bracket.

Dimensions: 2" long x 5/8" wide x 1-1/8" deep.

Vintage Genuine Nikko Electric - New Old Stock - Rare

Made in Japan

Applications: Consumer Appliances, Amplifiers, Audio/Visual 

Learn More

MECHANICAL PRODUCTS MP - 1610-072-060 6A Circuit breaker.

MP is a leading innovator and manufacturer of circuit breakers. Since 1943, MP has been providing high-quality custom solutions in circuit breakers and thermal circuit protectors.

6Amp 125/250VAC.

Auto reset, no reset knob.

"Snap-Acting", Bimetallic Thermal Sensing Element.

New Old Stock

Proudly Made in USA

Learn More

FGB-FIL interference suppression filter used for ZMS strain gauge carrier links and FGB-1/FGB-2 frequency generators. OVERLOAD FILTERDEMATIK FGB-FIL 469 529 4464/5 Learn More

Mech Products - 1600-122-100 - Circuit Breaker, 10 Amp.125/250

The Series 16 is a proven reliable, single-pole thermal circuit breaker designed for your equipment protection needs in the 0.5 to 70 amp range. The MP Series 16 is suitable for diverse applications such as Medical Equipment, Uninterruptable Power Systems (UPS), Portable Generators, Welders, Industrial Cleaning Equipment, and Transportation.

Minimum Ultimate Trip:The Series 16 offers a minimum ultimate trip of 100% of rated current at 25°C/77°F.

Maximum Ultimate Trip:Below 1A - 145%, Between 1A and 35A inclusive - 135%, At 40A and above - 140% of rated current at 25°C/77°F.

Overload Capacity:10X of rated current for 5.0 A - 70.0A and 6X of rated current for 0.5A - 4.5A.

Dielectric Strength:Series 16 has a dielectric strength that exceeds 1,500V per UL, CSA and VDE.

Ignition Proof:The Series 16 in ratings of 0.5 - 70A conforms to USCG Title33, DFR, Section 183.410(a), per UL1500 standard for safety for ignition-protection test for marine products

Mount: Panel Mount

Connections: Straight 0.250" Quick Connect X 0.032" Thick

Push Button Manual Reclosable.

125/250VAC.

10 Amp Current Rating.

Dimensions: Body Length 1.22"  X Width 0.84" X Thickness 0.56" (31.0mm X 35.0MM X 14.2mm) 

Body Length including contact connections: 1.66" (42.2mm) 

UL, CSA

New Old Stock

Made in USA

Learn More

LITTELFUSE - V39MA2S MOV. TVS, transient voltage surge suppressor.

Voltage Rating: 25VAC, 31VDC.

0.17 Joules.

Capacitance: 250pF.

Peak Surge Current: 40A 

Surge Rating: 0.17Joul

Mount: PCB

Package: 3mm D, Axial Leads.

Alternate: Mouser 576-V39MA2S, Newark 75C8272

More info:http://www.littelfuse.com/data/en/Data_Sheets/Littelfuse_MOV_MA.pdf

Learn More

LITTELFUSE - HPF - 571 - 571007P - LITTELFUSE - HPF Watertight Fuse Holder

Panel mount fuse holders are for midget style and Class CC fuses. Class CC fuses have a rejection feature on one end cap, which mates with the rejection feature of Littelfuse Class CC fuses holders to prevent the installation of fuses with lower voltage ratings or interrupting ratings. Watertight version must be front panel mounted.

Littelfuse® Fuse Holder, Watertight, Series: 571, 600 VAC/VDC, 30 A, 1 Pole, Class: CC/Midget, Combination Solder/Quick Connect, Panel Mount, 1-13/32 to 1-1/2 in Fuse Length, 13/32 in Fuse Dia, -40 to 85 deg C, For Use With: Midget and Class CC Fuses, Thermoplastic, Black, 1.12 in Dia x 2.1 in L

Watertight - O-Ring Gaskets Mounted on Body and  Cap

Series: 571 000 

Product: Fuse Holders 

Mopunt: Panel Mount  

Fuse Size / Group: 10.3 x 38 mm, 5AG, Midget   

Mounting Style: Panel Mount    

Material: Thermalplastic

Number of Poles: 1 Pole

Current Rating:  30 A      

Voltage Rating:  600 V   

Minimum Operating Temperature: - 40 C             

Maximum Operating Temperature: + 85 C            

Color: Black    

Dimensions: 1.12 in Dia x 2.1 in L    

Illumination: Not Illuminated

Alternate: Littelfuse 571007P, UPC 079458109481

New Old Stock

Learn More

Texas Instrument - Sensata - KLIXON - 51MC1-25-4 - Circuit Breaker.

4 Amp,

50VDC.

"M3A"-CURVE 25.

Learn More