Other Hardware

3.25"DIA. LG. BLACK CASTER 2.22" WIDE MADE FOR A 0.75" SHAFT HAS ROLLER BEARINGS. HARD PLASTIC WHEEL. Learn More

TEKTRONIX - 213-0182-00 - Hardware.

• Socket cap screws generate tremendous clamping force
• Very strong socket head for maximum endurance
• Socket cap screws are great for tight spaces

Allen Hex Key, Stainless Steel

Cap Screws, 1/4-20 x 1.343" (34.1mm) long.

Threaded Area Length: 0.561" (14.2mm) long.

Plus Seat: 0.197" (5.0mm). Head 0.398" (10.1mm) D x 0.584" (14.8mm) long.

Package of 10.

Learn More

Southco - 84-29-101-10 - Coupler.

1/4 Turn

Knurled Type Head 

Lock Nut Fractional Turn Fastener

1-set contins 3-pieces

2-Plastic 1-Rubber

0.3'' long x 0.4" D x Expandable 0.20" ID.

Alternate: SOU84-29-101-10

RoHS Compliant

Learn More

SDP/SI - A6R6-110012 - Hardware, Timing Belt.

Resistance to dirt, grease, oil, and moisture. Polyurethane has excellent abrasion resistance, so these belts don’t create dust while they runIt has fiberglass tensile cords for strength, durability, and resistance to elongation, and it has a polyurethane tooth facing for quieter operation and resistance to wear.

Pitch: 0.0816" (40D.P.).

Number of Grooves/Teeth: 110.

Width: 1/8" (0.125") 3mm

Material: Polyurethane.

Tension Member: Fiberglass.

Pitch Length: 8.98" (228.092mm).

Single Sided.

Learn More

ROBINSON AVIATION - K166-8D Hardware, Shock Vibration Isolation Spring Mount, Metallic Dampener.

Anti-Vibration Compression Spring Mount

0.19" ID Hole.

Spring Supported

Flange-Mount on 1.385" Centers.

Mounting Hole Diameter: 0.138  

Learn More

ESSENTA RICHCO PLASTICS CO - LCBS-4-01 Hardware, Spacer/Stand-offs.

Circuit Board Support Stand-Off / Locking Circuit Board Supports.

Snap-in Locking.

Material: Nylon 6/6.

Color: Natural.

Dimensions: 1/4" (6.4mm) Board Spacing/Panel Separation with top 0.156" and bottom 0.187".

RoHS Compliant

Alternates: TRLCBS-4-01, DTRLCBS-4-1, Mouser 144-LCBS-4-01, RP426-ND, Newark 28AH1212

 

Learn More

Cable Ties Accessories - Black 84mm long x 9.4mm x 5mm"Use with Panduit base FCB13 or RAFCB13" Learn More

Round blue plastic cover for protecting approx 1" pipe or connector ends. Learn More

Clear Plastic Socket Covers Learn More

ITW - 4041-00-5075 U-41 - Rubber Bumpers/Feet, Self-adhesive. 1 Sheet

High quality molded rubber Bumper stops are used on thousands of different applications and are made in various shapes and sizes to suit the needs of our customers. These crack-resistant, non-skid bumper pads do not contain plasticizers, oils or fillers. Additionally, they will not mar, scratch, or stain any surface. These bumpers feature an acrylic-based adhesive for long-term adhesion that has excellent solvent and ultraviolet resistance and have high shear strength.

• Abrasion resistant
• Excellent resistance to skidding and coefficient of friction
• Vibration and shock dampening
• Crack-resistant and resilient
• UL-recognized

Each Sheet contains a total of 105 Bumpers = 30 and 75 Self-adhesive Black PVC Round Bumpers

Dimensions: 30 Pieces 0.30" Diameter Tapered, 0.200" High and 75 Pieces Round, Dome Shaped 0.25" Diameter 0.085" High.

Not prepunched, must be cut out of sheet (Approximately 6" x 3").

One sheet of 105 Pieces.

Suggested Applications: Project boxes, under computers desktop calculators keyboards telephones and speakers to prevent vibration skidding or marring surfaces, under cutting boards to prevent skidding, crafts projects and many other uses. 

Proudly Made in USA

Learn More

Learn More

Hardware. Beam clamp. 1/2", RA. Learn More

CAMLOC - 22T01-3-08-2BB - Hardware, Screw Fastener.

Captive screws front mount pan head with slotted recess.

All with Plastic Snap-InGrommet.

Will still maintain positive locking of the fastener under vibration.

Package of 10.

Learn More

BUD INDUSTRIES - H-9162 - Bud Handle, Chrome 7 Inch, 1/4-20 Stud, Set of 2.

Bud Industries manufactures electronic enclosures, standard electronic enclosures, custom electronic enclosures, accessories, brackets, card racks, cabinet racks, open racks, server cabinets, co–location cabinets and more.

Status: Discontinued

Heavy Duty - Industrial Quality Handle.

Material: Chrome Plated Steel.

Dimensions: Approximately 7" long with nuts. (See Attached Print)

Set of 2.

Learn More

ASTATIC - CTI 43907.01 Rubber Washer Very Flexible 

20mm ID, 27.4mm OD. 22.6mm mount.

2.3mm above board. -

Min Order 4/$1.00

Possibly manufactured for an Astatic Microphone Element

Note: Also Available in White,

Optional to specify color preferrance in comments on order.

Learn More

Dritz - Anchor Hardware. "D" Ring for Straps.

Metal D Rings can be used to make tie downs straps, rigging, carry-on toool or travel bags.

Break Strength - Several Hhundred Pounds.

Material: Steel.

Has a Naval Anchor Stamped on it.

Dimensions: 1.158" wide, 0.87" ID x 0.6"ID.

Also has a Mounting Clip with 0.2" hole.

Color: Chrome Plated.

NOT FOR OVERHEAD LIFTING.

Package of 8.

Learn More

TE Connectivity AMP INC - 207719-1 - D-Sub Hardware Kit

Status: Discontinued

Jackscrew Socket For AMPLIMITE Series HDE, HDF, HDP

CONN SCREWLOCK FEMALE 2 SETS/BAGD-SUB

ACCESSORIES KIT SCREW LOCK FEMALE

Length - Threaded Portion Below Head: 0.560" (14.22mm)

Length - Below Head: 0.560" (14.22mm)

Thread Size: 4-40 Socket, 4-40 Screw

Alternate: Mouser 571-207719-1, DigiKey A9007ND, 5207719-1

Learn More

ABB CONTROL INC. - EHTK145 - Hardware.

Terminal kit for EH145 Contactors.

With aluminum Lug

Wire Range: #8 - 3/0AWG.

Torque: 200 lb. in.

Each Kit has 3 lugs.

UPC 662019 282145

Alternate: Newark 61Y6613

Learn More

3M - 560B - 7000005896 - Connector, Solderless Terminal.

3M Scotchlok Insulation Displacement Connector 560/560B is a double run or tap connector for tap or parallel splicing. It is suitable for general purpose electrical connections on an auto, boat, van or trailer. Polypropylene insulated, self stripping and flame retardant.

Insulation Displacement Connector, Double Run or Tap, 600 Volt, 18 to 16 AWG (Solid/Stranded), 14 AWG (Stranded), Flame Retardant, Polypropylene Insulation, Blue, Bulk.

Scotchlock IDC S/LOK Connector Tap & Parallel.

Self Stripping.

Wire Size: 18 - 16 AWG / 14 AWG Stranded

Ibsukation Outer Diameter: 0.145"

Color: Dark Blue.

Scotchlok, 600V.

Package of 10.

UPC 00054007201816

Learn More

Keystone Electronics - 184 - 30 Volt Battery Holder, Aluminum New

An established design that has gained wide acceptance for commercial and military applications. Batteries are held under constant spring tension assuring low contact resistance. Recommended for use where shock or severe vibration is encountered. 

Clips: Spring Steel, Nickel Plate

Phenolic Base: Type PBE, Per MIL-P-3115C

Contact Eyelets: Brass, Nickel Plate

Frame and Clips: Aluminum 2024-T3

Insulating Washers: Moisture Proof, Resin Impregnated Fibre

Solder Lugs: Brass, Tin Plate

Numer of Cells: 2

Mounting Type: Chassis Mount

Termination Style: Solder Lugs

Battery Cell Size: 2/3A

Battery Holder Dimensions: See Attached Illustration.

Two mounting holes on Bottom 1.912" Spacing.

Chassis Mount.

Solder Lug Terminals.

Heavy Duty - New Old Stock.

Made in USA

Battery Cross Reference: Eveready 413, NEDA 210 

Alternates: Digi-Key 36-184-ND, Mouser 534-184, Newark 35F1638

Learn More

Display stand. "U" shaped, desk top style. Material: steel. Dimensions: overall 10-5/8" long x 9-1/2" deep x 4-1/2" high. Made in the USA. Note: weight 7.5 lbs, will require additional shipping. Learn More

Panduit - SSC2S-S10-M - T66G-6 - Nylon STA-STRAP Tie Wraps 7.31"

Innovative design and engineered materials make STA-STRAP cable ties the perfect fastening solution where performance really matters. Often imitated but never equaled, STA-STRAP cable ties provide superior performance in any application.

Body Material: Nylon

Color: Natural

Material: Nylon

Mount: Clamp

Weight: 1.415208 kg

Operating Temperature: -40 °C to 85 °C

#10 (M5) Standard Screw Support Bore

Strength: 50 lbs

Schedule B: 3926909988

Dimensions: Depth 4.6 mm X Length 187 mm X Width 4.6 mm

Lead Free:  Lead Free

RoHS: Compliant

Proudly Made in USA

The Grip of Steel^®:  Ty-Rap's non-hydroscopic stainless steel locking device ensures maximum strength and extended useful life.

Length: 7.31" 

Minimum Loop Tensile 50 lbs.

Material: Polyamide (Nylon 6.6)

Temp.: 85 C to 185 C

Color: Natural

0.200" Diameter support hole to secure what is being held.

Great for supporting Cables or Pipes.  

 

Learn More

Hardware, knob. Button caps, knurled. Socket head cap screw. Snap-on. Material: plastic. Dimensions: 16.1mm D x 4.4mm high. Overall height is 6.3mm. Color: red. Package of 10. Learn More

Hardware, wire nuts. Large 12 - 18Awg. Material: plastic. Color: Yellow. Package of 3. Learn More