Process Control

EATON - CUTLER-HAMMER - D50ER14 Expander 14 I/O 24VDC relay.

The Cutler Hammer D50 Series PLC Programmable Logic Control can be used for many different applications. The D50 PLC can also be a standalone controller that contains a Central Processing Unit (CPU) power supply, and input/output circuitry with terminals. No battery backup is needed for the 2K memory controller, and there is plenty of programming capacity for complex control schemes. The large number of timers/ counters relays, and data registers allow you to maintain the smallest PLC size PLC possible when you must upgrade to larger more expensive systems.

Status: Discontinued

Programmable Logic Controller (PLC)

D50 Series Module 14 I/O EXP Relay Output

I/O Module, 14 Point, 24 VDC

UPC:  78211400072

Alternates: D50ERI4, D50ERL4, D5OER14, D5OERI4, D5OERL4, DS0ER14, DS0ERI4, DS0ERL4, DSOER14, DSOERI4, DSOERL4 

New

CUTLER-HAMMER EATON - 28-2202 - Lamp #755.

Voltage: 6.3V,

Power: 1 W

T3-1/4 Bayonet.

For Cutler-Hammer 10250T Products.

Priced Each

Cutler-Hammer Eaton - 1555A-6507 Series A2 Fiber-Optic Sensor

Eaton Cutler-Hammer 55 Series Photoelectric Sensors are identical to Eaton Cutler-Hammer's 50 Series except without the interchangeable outputs or logic functions. They offer durability and high optical performance in a cost effective, self-contained package. The 55 Series features sensors with AC and DC operation in a single unit. A relay option is available on these models that provides a 3 Amp SPDT relay output for high current switching.

Eaton Cutler Hammer, 1555A-6507, Eaton 55 Series Photoelectric Sensor, Photoelectric, Sensor distance depends on the fiberoptic cables used, 50 mA max DC, NPN and PNP Open Collector, 50 mA at 30 Vdc, 4 Pin Mini Connector, 10-30 Vdc input, Auto reset short circuit

Features:

• High optical performance includes 100-foot (30.5m) thru-beam range and 6-foot (1.8m) diffuse reflective range
• Both AC and DC operation in a single unit
• Short circuit protected solid-state outputs on AC/DC and DC-only versions (except thru-beam)
• Relay output option provides 3 Amp current switching on AC/DC models
• Thru-beam models feature an infrared sensing beam along with a visible red LED behind the lens in the source unit to aid in sensor alignment
• Fiber optic sensors operate in thru-beam or diffuse reflective mode depending on the fiber optic cable selected
• Glass fiber optic cables plug into NEMA 4 rated sockets on the front of the sensor. Sockets are leakproof even when the fiber optic cables are not plugged in
• Fully potted construction for use in areas subject to washdown, high shock and/or vibration
• Choice of pre-wired power cable or built-in mini-connector versions. Standard pre-wired cable length is 6 feet (1.8m)
• Built-in, patented, 360 degrees rotation 10 degrees tilt ball-swivel base

SELF-CONTAINED,BARE BONES, 30VDC,CONN,W/FIBEROPTIC ADA

10-30VDC / Con.

CRAMER - 632E-A20S Meter, Hour.

4 Hour digits plus 1 tenths.

50 Cycle, 120VAC or 115VAC

Elapsed time. 9999.9 Hour.

Non-resettable.

Mount: 2.5" hole.

Body Diameter: 2.203"

Mounting Flange Width: 2.969" 

Body Depth: 2.850"

Mounting Method: Semiflush

Note: Cramer / Giannini Controls Corp.

NSN 6645-01-361-8947

Made in the USA.

New

Comptrol - 01064-040 - MS3106A18-1S - Power Cable.

Eight (8) Conductor stranded, shielded with drain wire and attached circular connector 10 Position female.

MS3106-18-1S. (HS35F-100-R2-SS-2048-AB-3904-SM18-EX-5V-S).

Defence, Military & Aerospace, Communications & Networking, Computers & Computer Peripherals

Comptrol - 3S7505MA115B1 Process Control, Accessory.

Photoelectric Controls Swivel Bracket, 30 Degrees adjustment.

Alternate: GE 3S7505MA115B1

"Micro-Change" Molded Connector 22-3C, 1 end straight, 1 end 90 Deg. Single keyway M12, 300V 80Deg C. Approximately 20" long.

Banner Engineering Corp - Q45XB6LVQ

Q45X Series: Retro

Range: 0.08 to 9 m

Input: Depends on Bus Card

Output: Depends on Bus Card 

Quick-Disconnect Connector

BARBER COLEMAN - 5656-66203-330-9-002300 to +300F Type T Controller

Output 1: 0-10VDC 5mAmax

Output 2: Switch: 1.5A

(5) Plug-in Boards: A-12039-203

A-12041-2 (2)

A-12038-1

A-11861-6

A-12218-008 Mother board

A-12212-6 Front Panel Display

120VAC

New in Foam Packing

Banner Engineering Corp - SBEF - Multi-Beam Scanner Block.

Opposed fiber optic (Glass Fibers) High Speed infrared. Fiber optic mode Multi-Beams are used with Banner's extensive selection of glass fiber optics to allow sensing in areas too "tight" or otherwise too environmentally hostile to the scanner block itself. In addition, the fiber bundle of a glass fiber optic assembly may be shaped at the sensing tip to exactly match the profile of the object to be sensed.

3/4 WIRE SCANNER BLOCK, EMITTER,

RANGE: DEPENDS ON FIBER

INPUT ON POWER BLOCK

OUTPUT: DEPENDS ON POWER BLOCK, INTERCONNECTING PINS

Overview

• Provides industry's most flexible modular sensor family, with over 5,000 custom configurations
• Offers interchangeable ac or dc power blocks and choice of 2-, 3- or 4-wire sensor blocks
• Available in opposed, retroreflective, diffuse, convergent and glass fiber optic sensing modes
• Ranges to 200 m
• Offers choice of output timing logic modules for output timing control
• Features ambient light receivers, optical edge transmitters and optical edge guides for specialized applications

New in Manufacturers Packaing.