Electrical, Electronic
& Electromechanical
Supplies - (440) 205-8388

Search Site

Hardware Other

Items 1 to 48 of 450 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction
  1. Mueller Electric Co - BU-60 series - Hardware, alligator clips. 10 Amp. Package of 25.

    Mueller Electric Co - BU-60 series - Hardware, alligator clips. 10 Amp. Package of 25.

    $3.00

    Hardware, alligator clips. 10 Amp. Note: May have a bit of rust from moisture during storage. Compatible with all shrouded, unshrouded, or retractable 0.16" (4mm) banana plugs, solder or crimp connection, jaw opens 0.31" (7.9 mm) max. Material: nickel-plated steel (BU-60). Length: 1.97" (50mm). Package of 25. Learn More
  2. Accuride - C133-12D - Ball Bearing 12" SLIDE ASSEMBLY

    Accuride - C133-12D - Ball Bearing 12" SLIDE ASSEMBLY

    $9.88

    12-Inch long overall. 8.4" Slide Travel Up to 30-pound Weight Bearing.Set consists of (2) zinc electroplated ball-bearing slides and (4) right angle metal brackets and (x) a bunch of screws. Weighs about 2pounds / set. Instruction sheet said "Concealed hinge flipper door slide." Eurpoean hinges Not Included. Learn More
  3. General Devices - C300S-114 - Chassis-Trak telescoping slides

    General Devices - C300S-114 - Chassis-Trak telescoping slides

    $9.48

    1 Pair of Telescoping Rack Cabinet slides LENGTH:14" OVERALL LENGTH: 29" Non-Pivoting Solid Bearing WITH HARDWARE Learn More
  4. Motorola Inc - MNT62312B1 - Hardware. Post mounting bracket.

    Motorola Inc - MNT62312B1 - Hardware. Post mounting bracket.

    $1.50

    Hardware. Post mounting bracket. For Motorola GPS timing antenna. Right-Angle 2-5/8" wide x 2-1/2". Base with four 1/2" x 1/4" slots and two 2" x 3", 1/4" threaded U-Bolts and hardware x 4-3/8" tall, with 1-1/8" D hole. New, non-ferrous. Weight: 0.5 lbs. Learn More
  5. RCA Tactec - Stickyone - Phenolic insulation board. Package of 25.

    RCA Tactec - Stickyone - Phenolic insulation board. Package of 25.

    $3.00

    Phenolic insulation board, 8 x 3"/ Thin 0.011" / 0.2mm phenolic board (tan/orange) used as insulation / circuit board protection in hand held radios. In storage for 30 years but the self adhesive strip on the entire back will still stick it where you place it. Has 6 notches cut out of it, about 1/2" wide. Package of 25. Learn More
  6. Cleveland Steel & Polymer - 056-6717B - Rubber Gasket 0.123" x 4.45" Round

    Cleveland Steel & Polymer - 056-6717B - Rubber Gasket 0.123" x 4.45" Round

    $3.99

    Black Neoprene Rubber Gasket 0.123" thick x 4.45" Round with convenient hole 1.78" directly in the center of it. We also have a nice black glass filled Nylon Ring P/N 056-5891B, same diameter with 1.7"ID hole, again, Right smack in the center, with 8 mounting holes - 0.425" thick in middle, slopes down to 0.07" thick at edge, available for $2.45 also. Learn More
  7. LORD MANUF. - 204PHC18-100 - Shock mounts. 3".

    LORD MANUF. - 204PHC18-100 - Shock mounts. 3".

    $3.00

    Hardware, shock mount. Size: 3" square. Mount: threaded 5/16" hole. Material: rubber and steel. Learn More
  8. Anacondia Metal Hose Co - 5-183 - Flexible conduit.

    Anacondia Metal Hose Co - 5-183 - Flexible conduit.

    $2.95

    Flexible conduit. Dimensions: 1" D x 15.75" long. Learn More
  9. Southco - 6-302 - Hardware, magnetic door latch.

    Southco - 6-302 - Hardware, magnetic door latch.

    $3.00

    Hardware, magnetic door latch. A heavy duty magnet 1.23" long x 0.36" thick including steel sides, with a heavy duty spring loaded push button 0.3"square that will push your door open when you push on it. I think it would require a mating 1/4" or larger tab on door cabinet, when pushed the magnet pulls back. Dimensions: 3" long x 1" x 0.5" thick. Mounts with two slots approximately 2.7" apart. Note: Spring loaded to push open). Learn More
  10. 8-182 - Hardware, plexiglass. 4.5" x 4.5" x 0.5.".

    8-182 - Hardware, plexiglass. 4.5" x 4.5" x 0.5.".

    Regular Price: $4.00

    Special Price $2.25

    Hardware, plexiglass. Picker International. Dimensions: 4.5" square x 0.5" thick. Clear. Learn More
  11. 8-436 - Steel tethers, vinyl coated. 36".

    8-436 - Steel tethers, vinyl coated. 36".

    $0.38

    Steel tethers, vinyl coated. Overall 35-3/8" hole -to- hole mounting loop and hangar, tough. With clear jacket 0.06" / 1.5mm OD. Learn More
  12. Keystone Electronics - 1644 - Hardware, spacers. Hex. Package of 10.

    Keystone Electronics - 1644 - Hardware, spacers. Hex. Package of 10.

    $3.00

    Hardware, spacers. Hex, external 6/32 with internal 6/32. Dimensions: 1/4" OD, male to female, 1" long. Overall with one threaded end 1-1/4" long. Material: brass with nickel plate. Package of 10. Learn More
  13. LESLIE LOCKE - DFS-1 - Hardware, ceiling fan swag chain kit.

    LESLIE LOCKE - DFS-1 - Hardware, ceiling fan swag chain kit.

    Regular Price: $3.95

    Special Price $1.98

    Hardware, ceiling fan swag chain kit. With a 20 foot 3 Conductor 18AWG cord, attached 3 conductor plug. Eighteen (18') feet antiqued brass chain and 2 swag hooks. (For use when there is no ceiling outlet). Box Imprinted "Play It Again Sam". Learn More
  14. SOL-VEX - 37-175-11 - Gloves, green Nitrile. Size11. Package of 12 Pr.

    SOL-VEX - 37-175-11 - Gloves, green Nitrile. Size11. Package of 12 Pr.

    $19.95

    Gloves, green Nitrile. Size: 11. Flock-lined, straight cuff. Sandpatch grip design. 13"Length. 15mil Thickness. Industry standard. High performance nitrile - Reliable chemical protection. Reduced chemical burns and caustic exposure. Puncture and abrasion protection. Reduced hand injuries. Cotton flock liner - Moisture absorption, Reduced dermatitis and increased comfort. Marked: For protection against OTTO Fuels. USDA Accepted. FSN: 8415-01-147-6263. Package of 12 Pr. Learn More
  15. PT-590 - Wire nuts set/kit. Package of 25 full kits.

    PT-590 - Wire nuts set/kit. Package of 25 full kits.

    $3.00

    Hardware. Wire nuts set/kit. Each kit includes - Minimum 3 wire nuts plus 8 #6 sheet metal screws 5/8" long and 8 tinnerman nuts. Package of 25 full kits. Learn More
  16. SINCLAIR & RUSS INC. - 727-89 BLK - Hardware. Cover for a 5/16" round object .

    SINCLAIR & RUSS INC. - 727-89 BLK - Hardware. Cover for a 5/16" round object .

    $0.15

    Hardware. Cover for a 5/16" round object approximately 1/2" deep x 1/8" D. Nipple to pull it off. Material: plastic, black. Learn More
  17. Akryl - 056-5891B - Nylon Flange 4.45" Round

    Akryl - 056-5891B - Nylon Flange 4.45" Round

    $2.45

    Black glass-filled Nylon Flange Ring 4.45" Round with 1.7"ID hole Right smack in the center, with 8 mounting holes - 0.425" thick in middle, slopes down to 0.07" thick at edge. We also have available the matching rubber gasket for $2.45 also, P/N 056-6717B. Learn More
  18. Panduit - FCP13-M20 - Cable Ties Accessories - Black

    Panduit - FCP13-M20 - Cable Ties Accessories - Black

    $3.00

    Cable Ties Accessories - Black 84mm long x 9.4mm x 5mm"Use with Panduit base FCB13 or RAFCB13" Learn More
  19. Panduit - MTP6H-E6-C - Hardware, cable tie. Military MS3319-11-9.

    Panduit - MTP6H-E6-C - Hardware, cable tie. Military MS3319-11-9.

    $0.50

    Hardware, cable tie. Military MS#3339-11-9. DCI: 58447. Length: 9-1/2". Material: Nylon. Mount: with 6 (M3) screw(s). Learn More
  20. LORD MANUF. - 4-042 - Hardware. Shock mount 2-1/2".

    LORD MANUF. - 4-042 - Hardware. Shock mount 2-1/2".

    $1.00

    Hardware. Shock mount without housing. Mount: 2-1/2". Note: Alt P/N: 200 XPD-60. Learn More
  21. LORD MANUF. - 4-050 - Hardware, shock mount.

    LORD MANUF. - 4-050 - Hardware, shock mount.

    Regular Price: $2.95

    Special Price $1.48

    Hardware, shock mount. With housing, 2-5/8" (mount). Learn More
  22. Robinson Aviation - K166-8D - Hardware, shock mount. 0.19"ID hole.

    Robinson Aviation - K166-8D - Hardware, shock mount. 0.19"ID hole.

    $1.47

    Hardware, shock mount. 0.19"ID hole. Flange-mount on 1.4" centers. Learn More
  23. 4-143 - Dual Bus Bar 9"L 0.10" x 0.50"spacing

    4-143 - Dual Bus Bar 9"L 0.10" x 0.50"spacing

    $3.32

    Dual Bus Bar 0.1" spacing, 0.50" spacing between common bus pins. 9-inch Long. 18 dual contacts per insulated strip. Learn More
  24. 6-211 - Casters. Plastic 1-5/8". Package of 4.

    6-211 - Casters. Plastic 1-5/8". Package of 4.

    $1.95

    Casters. Plastic 1-5/8", steel swivel base 1-1/2" square with 4 hole mount 1-5/8" centers. Gold-tone finish. Package of 4. Learn More
  25. 6-305 - LG. BLACK CASTER

    6-305 - LG. BLACK CASTER

    $2.50

    3.25"DIA. LG. BLACK CASTER 2.22" WIDE MADE FOR A 0.75" SHAFT HAS ROLLER BEARINGS. HARD PLASTIC WHEEL. Learn More
  26. 6-334 - Heavy Steel Tethers 0.120" O.D.

    6-334 - Heavy Steel Tethers 0.120" O.D.

    $1.00

    Heavy Steel Tethers 0.120" O.D. 8ft 10" long. Learn More
  27. Southco - 97-60-120-15 & 97-67-103-15 - Over-Center series latches, 2 piece set.

    Southco - 97-60-120-15 & 97-67-103-15 - Over-Center series latches, 2 piece set.

    $8.95

    97-60-120-15 Over-Center series latches, 2 piece set. Color: black. Finish: powder coat. Keeper type: no keeper (latch only). Latch body style: tab position up. Mount: up. Secondary catch option: no. 97-67-103-15 Access Restriction: pad lockable. Keeper type: concealed . Keeper (two hole mount). Latch body style:no latch (keeper only). Mount: down. Secondary catch option: no. Series: 60 series. Size series: large size. Spring: spring loaded. More info: http://www.southco.com/resources/documents/97.en.pdf Learn More
  28. 6-388-2 - 2 PC SPRING FASTENER ASSEMBLY

    6-388-2 - 2 PC SPRING FASTENER ASSEMBLY

    $0.98

    2 PC SPRING FASTENER ASSEMBLY Learn More
  29. 8-002 - Hardware, roller. Mounted on a SS bracket.

    8-002 - Hardware, roller. Mounted on a SS bracket.

    $0.50

    Hardware, roller. Mounted on a stainless steel bracket with 2 holes 0.625" (15.8mm) centers. Dimensions: overall 1.240" (31.5mm) wide x 1.163" (29.5mm) high, including roller. Very nice. Learn More
  30. ABB Control Inc - EHTK145 - Hardware. Terminal kit. Each kit has 3 lugs.

    ABB Control Inc - EHTK145 - Hardware. Terminal kit. Each kit has 3 lugs.

    $1.00

    Hardware. Terminal kit for EH145 contactors. With aluminum lug, wire range: #8 - 3/0AWG. Each kit has 3 lugs. Learn More
  31. 8-224 - Shoulder washers 3/16" ID. Package of 100.

    8-224 - Shoulder washers 3/16" ID. Package of 100.

    $4.99

    Hardware, shoulder washers. Material: fiber. Size: 9/16" OD x 1/4" thick x 3/16"ID. Color: black. Package of 100. Learn More
  32. 8-379 - Wire Markers A-W for Terminals Strips

    8-379 - Wire Markers A-W for Terminals Strips

    $3.00

    Wire Markers A-W for Terminals StripsBlk Plastic 1-1/2" wide x 9-1/2" long. Learn More
  33. 8-441-1 - Hardware, clip. Metal, insulated. Package of 10.

    8-441-1 - Hardware, clip. Metal, insulated. Package of 10.

    $3.00

    Hardware, clip. Metal, insulated. Clothespin-style clip. Package of 10. Learn More
  34. 8-504 - Recessed handle, spring loaded. Pull-Up-To-Grasp.

    8-504 - Recessed handle, spring loaded. Pull-Up-To-Grasp.

    $5.95

    Hardware, handle. Recessed handle, spring loaded. Pull-Up-To-Grasp. Material: steel. Mount: 3 holes with 2-1/16" centers. Dimensions: mount plate 4.994" long x 2.962" wide x 0.564" high. Overall 3.615" wide with handle not in use. Learn More
  35. Bud Industries - H-9162 - Bud handle #H-9162. Set of 2.

    Bud Industries - H-9162 - Bud handle #H-9162. Set of 2.

    $4.99

    Hardware, handle. For Bud Industries, #H-9162. Material: chrome plated steel. Dimensions: approximately 7" long. Set of 2. Learn More
  36. Anchor - 8-518 - Hardware. "D" Ring for straps. Package of 10.

    Anchor - 8-518 - Hardware. "D" Ring for straps. Package of 10.

    $3.00

    Hardware. "D" Ring for straps. Material: steel. Has a Naval anchor stamped on it. Dimensions: 1.158" wide, 0.87" ID x 0.6"ID. Also has a mounting clip with 0.2" hole. Color: Chrome. Package of 10. Learn More
  37. 8-579 - Wall plate. For dimmer switches.

    8-579 - Wall plate. For dimmer switches.

    $1.00

    Wall plate. For dimmer switches. Material: aluminum. Mount: 2 holes with 3-5/16" centers. Dimensions: 4" x 2" wide. Learn More
  38. 8-615 - Connector, hole plug. 5/8" D. Package of 10.

    8-615 - Connector, hole plug. 5/8" D. Package of 10.

    $3.00

    Connector, hole plug. Idiot plug for 5/8" diameter holes. Material: brass. Package of 10. Learn More
  39. 8-634 - SMALL NYLON BRUSH

    8-634 - SMALL NYLON BRUSH

    $3.00

    SMALL NYLON BRUSH about 2" long with black bristles 5/8" long - disposeable - for supergluing or painting or other things Learn More
  40. 8-648 - CEILING LIGHT PULL STRINGS

    8-648 - CEILING LIGHT PULL STRINGS

    $3.00

    34-Inch WHITE PULL STRINGS FOR CEILING LIGHTS & FANS Learn More
  41. 9-089 - Italian white marble. 3".

    9-089 - Italian white marble. 3".

    $1.00

    Italian white marble. Dimensions: 2.975" long x 3.018" wide x 0.750" high. Application: A very nice paper weight, or maybe used in crafts. Learn More
  42. 9-125 - Hardware, handle. Equipment handle/strap.

    9-125 - Hardware, handle. Equipment handle/strap.

    $0.25

    Hardware, handle. Equipment handle/strap. Material: plastic. Each reinforced with a metal insert. Flexible. Dimensions: 1" wide x 8" long. Mount centers: 7-7/8". Learn More
  43. 9-134 - Hardware, belt hook 2-part, M toF. Package of 10.

    9-134 - Hardware, belt hook 2-part, M toF. Package of 10.

    $1.99

    Hardware, belt hook 2-part, M to F. Gray plastic. Maybe used on a dog collar. Package of 10. Learn More
  44. MS-026 - Hardware. Hollow bakelite rod. Package of 10.

    MS-026 - Hardware. Hollow bakelite rod. Package of 10.

    $3.00

    Hardware. Hollow bakelite rod. Dimensions: 1/4" OD x 18" long, with an ID of 0.14". Package of 10. Learn More
  45. MS-034 - Hardware, handle. Equipment handle/strap.

    MS-034 - Hardware, handle. Equipment handle/strap.

    $1.50

    Hardware, handle. Equipment handle/strap. Material: plastic/rubber. Flexible. Dimensions: 1" wide x 6" long. With metal/zinc ends. Overall length: 7-3/4" long. Note: P/N: 00383-91-20008. Learn More
  46. PT-012 - Vector board PINS teflon Silver plated.

    PT-012 - Vector board PINS teflon Silver plated.

    $3.00

    Vector board PINS teflon Silver plated. Min 4/$1.00 Learn More
  47. 3M - SCOTCHCAST 4 - Electrical insulating resin #4. 3.2 oz.

    3M - SCOTCHCAST 4 - Electrical insulating resin #4. 3.2 oz.

    $8.95

    Electrical insulating resin #4. For insulating power cable. Size A 3.20z. (90gr). Learn More
  48. MS-276 - Wire holders. PCB, snap-in. Package of 50.

    MS-276 - Wire holders. PCB, snap-in. Package of 50.

    Regular Price: $3.50

    Special Price $3.00

    Hardware. Wire holders. Material: plastic, white. Mount: PCB, snap-in. Dimensions: 0.612" long x 0.220" wide x approximately 0.835" above board. Note: Snap clip. Package of 50. Learn More

Items 1 to 48 of 450 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

List  Grid 

Set Descending Direction

Back to top