|
|
CAMBION
957-0847-01-05-16
|
Hardware. Standoffs, hex threaded, 0.256" OD, 0.68" tall has 3/16"lug with 6 predrilled holes for wires. Blue insulation. Package of 3.
|
NOS
|
$1.00
|
|
|
|
MUELLER ELECTRIC CO.
BU-60PB
|
Hardware, alligator clips. 10 Amp. Package of 10.
|
NS
|
$1.00
|
|
|
|
RCA TACTEC
Stickyone
|
Thin 0.011" / 0.2mm phenolic board (tan/orange) used as insulation / circuit board protection in hand held radios. In storage for 30 years but the self adhesive strip on the entire back will still stick it where you place it. Has 6 notches cut out of it About 1/2" wide.
|
OLD
|
$0.35
|
|
|
|
MOTOROLA
MNT62312B1
|
POST MOUNT BRACKET Right-Angle 2-5/8"Wide x 2-1/'2" Base with four 1/2"x1/4"-slots and two 2"x3" 1/4"-threaded U-Bolts & hardware X 4-3/8" TallL with 1-1/8"Dia Hole - NEW - Non-ferrous 20pc/8-pound box POST MOUNT BRACKET FOR MOTOROLA GPS TIMING 2000 ANTENNA. 0.5 pounds
|
NEW
|
$1.50
|
|
|
|
TEN MFG. INC
5-506
|
A flat-mounted cabinet door hinge, having a low cabinet-side profile, including a cabinet mounting plate and a door mounting plate interconnected by an elongated carrier plate, optionally containing a bend, attached to the cabinet and door mounting plates through a link and a toggle, to allow the door to swing from a closed position through an arc exceeding 90.degree. to an open position and containing a spring device to urge and releasably hold the door in its closed position against the cabinet.
1. A flat-mounted cabinet door hinge having a low cabinet-side profile when in fully-opened position,
2. A flat-mounted cabinet door hinge having a low-cabinet side profile
3. The flat-mounted cabinet door hinge of claim 2 wherein said link is made of a low-friction material.
4. The flat-mounted cabinet door hinge of claim 3 wherein said low-friction material is Delrin (trademark).
5. The flat-mounted cabinet door hinge of claim 2 wherein said spring means includes a wide-leaf spring fixedly mounted to said carrier plate and extending to the hinged connection between said carrier plate and said link for bias interaction with a spring follower surface formed on said link.
6. The flat-mounted cabinet door hinge of claim 4 wherein said link includes a flat, thin plate defined along one edge by an elongated radial surface that is placed in contact with said spring means and that further has formed therealong a flat for interaction with said spring means to provide releasable hinge closure pressure to said hinge when said hinge is moved into its closed position.
|
NS
|
$3.48
|
|
|
|
GENERAL DEVICES
C300S-114
|
1 Pair of Telescoping Rack Cabinet slides LENGTH:14" OVERALL LENGTH: 29" Non-Pivoting Solid Bearing WITH HARDWARE
|
FN
|
$9.48
|
|
|
|
ACCURIDE
C133-12D
|
12-Inch long overall. 8.4" Slide Travel Up to 30-pound Weight Bearing.
Set consists of (2) zinc electroplated ball-bearing slides and (4) right angle metal brackets and (x) a bunch of screws. Weighs about 2pounds / set. Instruction sheet said "Concealed hinge flipper door slide." Eurpoean hinges Not Included.
|
FN
|
$9.88
|
|
|
|
Akryl
056-5891B
|
Black glass-filled Nylon Flange Ring 4.45" Round with 1.7"ID hole Right smack in the center, with 8 mounting holes - 0.425" thick in middle, slopes down to 0.07" thick at edge. We also have available the matching rubber gasket for $2.45 also, P/N 056-6717B.
|
NS
|
$2.45
|
|
|
|
SINCLAIR & RUSS INC.
727-89 BLK
|
BLACK PLASTIC COVER FOR A 5/16inch ROUND OBJECT APP.1/2 inch deep WITH A 1/2 inch LONG 1/8 inch DIA. NIPPLE TO PULL IT OFF.
|
NOS
|
$0.15
|
|
|
|
UNMARKED
PT-590
|
EACH BAG CONTAINS 3 MIN.WIRE NUTS AND 8 #6SHEET METAL SCEWS 5/8"L & 8 TINNERMAN NUTS
|
NOS
|
$0.05
|
|
|
|
37-175-11
|
Gloves, green Nitrile. SOL-VEX. Flock-lined, straight cuff. Sandpatch grip design. 13"Length. 15mil Thickness. Industry standard. High performance Nitrile - Reliable chemical protection. Reduced chemical burns and caustic exposure. Puncture and abrasion protection. Reduced hand injuries. Cotton flock liner - Moisture absorption, Reduced dermatitis and increased comfort. Marked: For protection against OTTO Fuels. USDA Accepted. NSN:8415-01-147-6263
|
NEW
|
$19.95
|
|
|
|
LESLIE LOCKE
DFS-1
|
CEILING FAN SWAG CHAIN KITS 20FT BROWN CORD 3cond 18awg W/3 cond PLUG 18' ANTIQUED BRASS CHAIN + 2/SWAG HOOKS/HARDWARE (FOR USE WHEN THERE IS NO CEILING OUTLET) Box Imprinted "PLAY IT AGAIN SAM"
|
NS
|
$1.98
|
|
|
|
KEYSTONE ELECTRONICS
1644
|
External 6/32 with internal 6/32 Hex Spacers, 1/4" OD, Male to Female, New 1" long Overall with one threaded end 1-1/4" long, Brass with Nickel plate
|
NS
|
$3.24
|
|
|
|
UNMARKED
8-436
|
35-3/8" hole -to - hole mounting loop & hangar, tough Clear aircraft plastic coating over steel cable, 0.06" / 1.5mm OD w/ coating, so as not to hurt delicate fingers or parts. COVERED STEEL TETHERS
|
NOS
|
$0.38
|
|
|
|
8-182
|
4-1/2" Square X 1/2"Thick CLEAR PLASTIC BLOCK
|
NOS
|
$2.25
|
|
|
|
SOUTHCO
6-302
|
MAGNETIC DOOR LATCH a heavy duty magnet 1.23"L x 0.36"thick including steel sides, with a heavy duty spring loaded push button 0.3"square that'll push your door open when you push on it. Think it would require a mating 1/4" or larger tab on door cabinet, when pushed the magnet pulls back . . . 3"Long x an inch x half inch thick. Mounts with two slots about 2.7" apart. Neat !
|
NS
|
$2.48
|
|
|
|
ANACONDIA METAL HOSE CO
5-183
|
FLEX CONDUIT 1" DIA 15.75" LONG
|
NS
|
$1.48
|
|
|
|
LORD MANUF.
204PHC18-100
|
RUBBER SHOCK MT'S, HOUSING 3" SQ MOUNT WITH A 5/16"THREADED HOLE IN THE CENTER
|
NS
|
$3.00
|
|
|
|
UNMARKED
SHC416C6CP
|
STAINLESS STEEL SCREW
|
NOS
|
$0.79
|
|
|
|
SOUTHCO
84-29-101-10
|
1-set of 3-pieces 2-plastic 1-rubber 0.3''L x 0.4"OD x expandable 0.20"-ID
|
NOS
|
$0.35
|
|
|
1 2 3 4 5 ...
|