Process Control

32 Point Output 24VDC Learn More

Process control. 8 Point Input 12-24VDC source. Learn More

16 Point Input 12VDC Sink Learn More

Process control. 8 Point input module 5VDC TTL sink. Learn More

8 Point Output 230VAC Module Learn More

6 Point 115VAC/DC Isolated Input Learn More

Digital input module, 115Vac/dc input, 6 point, Isolated. Learn More

8 Point Input 115VAC/DC Learn More

Controller Access Module Learn More

Thermocouple/MV Input Module Learn More

Processor rack, augmented, 19", 4 option slots. 11/14/16/36 Y522190100006

Learn More

Processor rack. 11" 11/14/16 Y903780800014.

Learn More

AGMT PROC. 1/2 RACK 620-06/10/15 Y903573500005 Learn More

Switch, proximity. Supply voltage: 120VAC 50/60Hz NO. Current rating: 2.7Amp make. 0.5Amp break & cont. Min: 0.2Amp. Note: 2 Wire AC proximity limit switch. Complete with manufactures specification sheet. Learn More

Programmable Logic Controller. MICRO-1 PLC CPU Power: 100�240V AC, NPN transistor inputs, relay outputs. Input: 24VDC. Learn More

Time Mark - 261S120 - 98A00479-01 - Relay, Solid State.

The Model 261 series Alternating Relay is designed for duplex pumping systems where it is desirable to equalize pump run time. The solid-state alternating circuit drives an internal electromechanical relay. A continuous power source and control switch are required. The control switch (float, pressure or other isolated contact) is connected between the L1 terminal and the control terminal. Each time the control switch is opened the output contacts will change states. Indicator lights on the case show the internal relay status. On the optional toggle switch versions, the toggle switch is set to the ALTERNATE position. Setting the switch to Load 1 or Load 2 will lock the relay in position, preventing alternation.

Relay, solid state. Alternating. SP.

Current rating: 10Amp.

Control voltage: 120V AC/DC.

Enclosed. Base: 8 Octal. With Led(s).

Mount: Socket

Number of Pins: 8

Current Rating: 10 A

Termination: Plug

Voltage Rating (AC): 120 V

Approvals: CSA, UL

In Manufacturer's Packaging with Instructions

New

Learn More

Valve, fluid. 3 Way, 110/120VAC 10 watt coil, 150PSI/1034KPa, 5/64 orifice, 1/8" fitting. Made in the USA. Learn More

PC CARD BOX MARKED 8502 Learn More

IDEC IZUMI - FC1A-C1A1E - Programmable Logic Controller.

Status: Discontinued

MICRO-1 PLC CPU Power: 100-240V AC

100-240VAC 21VA 50/60HZ 

NPN Transistor Inputs

Relay outputs.

Sink Input.

Approximate Dimensions: 5" X 7" X 4"

Additional Information: https://www.idec.com/language/english/manual/Micro1_manual.pdf

Note: S/N 74524.

Learn More

HONEYWELL / SKINNER VALVE - V51HA2150N - Solenoid Valve. 32VDC 150PSI 10W. New Skinner has been recognized as a leader in solenoid valve technology since 1949 when they first started manufacturing solenoid valves.The Honeywell Skinner Valve V51HA2150N is a solenoid valve designed for hydraulic and pneumatic systems. Made in the United States, this valve operates at 32VDC with a maximum pressure of 150 PSI and 10W of power. Known for its reliability and quality, the Honeywell Skinner Valve is a popular choice for various industrial and commercial applications requiring precise control of fluid flow. The 32 VDC power supply voltage is often chosen for its safety in low-voltage applications, integration with specific industrial or vehicle power systems, and energy efficiency, particularly in continuous duty cycles where the coil generates less heat than AC alternatives. Honeywell Skinner Valve - V51HA2150N - 2 Way Direct Acting Solenoid Valve Voltage:32VDC, Pressure: 150PSI, Orifice: 1/16" Orifice, Coil Resistance: 130 Ohm, Power: 10 watt. Code HT4. Body Stainless Steel Seal Material: Viton Operating Temperature: -15°F to +400°F (-26°C to +205°C). Dimensions: 1.642" Diameter x 2.523" High. Overall: 3.582" 2 Wire. Applications: Pneumatic and Hydraulic Systems, Process Control, Refrigeration and HVAC, Automated Equipment, Fuel and Gas Systems. Specialized Applications: Automotive and Heavy Machinery, Medical Equipment, Portable Equipment, Aviation and Motorsports. Made in USA Learn More

2.5" FIBER OPTIC PROBE- Duplex (2 cables) with a Pretty blue YAMATAKE-HONEYWELL FE-PA-F1RAZOR/CUTTER Learn More

HONEYWELL - ML6285A 1008 - Rotary Actuator, Direct Coupled, Spring Return.

Floating Control Motor

Torque: 50 lb in

Rotation: 95 Deg rotation.

Power Input: 24VAC 12VA.

Complete with manufactures product data sheets

Factory New

Learn More

8 Point Input 5VDC Sink Learn More

HOFFMAN – 404210 - FT015H-4 – Float and Thermostatic F&T STEAM TRAP, 15 psi, 406F, 5-1/2 In. L The Hoffman Specialty float and thermostatic (F&T) steam trap, model FT015H, features a 1" trap connection in a same side, H-pattern configuration. This pattern allows steam to enter from either side of the trap, and the condensate to discharge from either the opposite or the same side of the trap. This configuration also allows for more flexibility when piping in. H Series F&T traps are continuous drainage and are designed for low, medium, and high pressure steam mains and come standard with stainless steel internal parts. The FT015H is cast iron and has a 15 psi maximum operating pressure. This trap has a capacity for 1,600 pounds per hour. The traps are designed for service on heat exchange equipment where there is a need to vent air and non-condensable gases quickly. They are recommended for modulating pressures where widely varying loads are present and are a good choice for their ability to vent air at very low pressures, handle start up air loads, and operate against back pressure. Type: Series H Steam Trap, (F)NPT Connections 1 in Max. Operating PSI 15 PSI End to End Length 5 ½” Condensate Capacity Lbs/Hr: 1,600 lb/hr Max. Temp. 406 Degrees F Type Float And Thermostatic Body Material Cast Iron Pipe Configuration (4) Pipe (2) Inlet and (2) Outlet, Pressure Air Vent Self-Adjusting Application For all Process Applications Requiring Removal of Condensate, Includes Air Vent (F)NPT Connections: 1 in Max. Operating PSI: 15 psi Condensate Capacity Lbs/Hr: 1,600 lb/hr Max. Temp.: 406 Degrees F Body Material: Cast Iron Type: Float And Thermostatic Pipe Configuration: (4) Pipe, (2) Inlet and (2) Outlet Pressure Air Vent: Self-Adjusting Application: For all Process Applications Requiring Removal of Condensate Includes: Air Vent Manufacture: ITT Hoffman specialty. Proudly Made in USA Learn More