Process Control

GUARDIAN - A420-057784-00 Solenoid.

Voltage: 120VAC Intermittent duty.

With 0.5 uF 400VDC capacitor.

Learn More

Conductive metal sensor. 10-30VDC 0.25A 18mm Dia, has two threaded nuts. 97mm long. Long unshielded 3-cond cable. "standard range" SOURCE OUTPUT NO - with instruction sheet - Other models available, too - see Prox Switch category Learn More

Size 1, Overload heaters 3.32-3.43Amp Learn More

Heater. Overload thermal unit heating element. Mark: C097A. Learn More

E Learn More

Programmable Controller. 16 channel analog voltage input module. 1 - 16 selectable, single ended. New. Learn More

General Electric - 44A399746-G01 - REG8C Power Supply Board.

Status: Discontinued

REG8 1050 BATTERY CHARGE

3N8100PS102A1

FAB# 44B399267-001

BD# 442B399855-002/7

CNC/ PLC Controller

Note: Commercial Fixed Repair cost is as high as $1568

Removed from Working Controller.

 

Learn More

Cylinder, 3"D x 15.5"L. 145-psi. Learn More

Festo - DNC-40-50-PPV-A-KP - 163339 - Standard Cylinder.

Standard to ISO 15552, Dbl-Acting; 50 mm Bre, 50 mm Stroke; 20 mm Rod Ø w/M16x1.25 Male Thread, G1/4 BSPP Pneumatic Connection Ports; Adjustable Cushions Both Ends; Prox Switch Ready

Pmax=10BAR/145PSI.

Botton Labeled KP-16-1000.

ISO 15552

Factory New

Alternate: Newark 67C5541

Learn More

Solenoid, DC. Coil 24VDC 4.5 watt. Case: 2.353" long x 0.850" wide x 1.147" high plus cable exit area 0.703". Has a 3 conductor cable, 5 ft. Note: Used/Removed from equipment. Learn More

General Electric - 3S7505PS700C6 - Reflex Photoelectric Relay with Optional Time Delay.

Status: Discontinued

Photoelectric Scanner

115V 50/60 Hz 12VA.

Output: 115VAC 1/10HP 5Amp Resistive.

DPDT Relay Output 

Genuine General Electric

New Old Stock

Learn More

General Electric - CR101H1 Switch, motor with NEMA 1 enclosure.

The CR101H manual motor starters provides dependable overload protection for single-phase motors up to one horsepower (115 or 230 Volts), and is the most economical starter choices where undervoltage protection is not required.

NEMA, Toggle, Starter Type Manual.

16 Amps AC, Max Voltage 277.

1 HP @ 1 Phase - 115V, 1 HP @ 1 Phase - 230V, 1 HP @ 115VDC, 1 HP @ 230VDC.

NEMA Type 1, No of Required Thermals 1, Number of Poles 2.

Height 4.16 In, Width 2.28 In, Depth 2.63 In

Standards UL (508)/ CSA.

Learn More

Heater, element. 3 Wire. Dimensions: 0.63" D x 1.402" long, above mount. Overall length: 1.7" long. Note: Marked A1015-120V. Cat5494. 102052669. Learn More

Process control. 8 Channel relay 12-30VDC or 12-250VAC output module. 4 Form C (SPDT). 4 Form A (SPST NO). Used/Removed from equipment. Learn More

Thermocouple temperature controller, 4 digit. 110/220VAC, SPDT relay output. ON/OFF. Dimensions: Only 3.5" wide x 1.66" x 5.86" deep. Note: Jenco Electronics LTD - P/N 372KC. Learn More

FABCO-AIR - J-5-X - Pancake Cylinder.

Double-acting pneumatic cylinder actuator with single rod - Fabco-Air (Pancake original series) - 1/2" (B1/2") bore - 1-1/2" (S1-1/2") stroke - #8-32 UNC-2B female threaded rod-end - 2 x #10-32 UNF-2B threaded pneumatic ports - rated for -25...+250°F / -31...+121°C ambient - round cylindrical shape - clear anodized Aluminium body / hard Chrome-plated stainless steel piston rod / standard Buna-N seals - through-hole mounting - rated for 12psi...250psi

Bore size: 2.7mm, 1/2" (B1/2")

Stroke length: 1-1/2" (S1-1/2")

Functions: Double-acting pneumatic cylinder actuator

Design: Single rod

Pressure: 12psi min.- 250psi max.

Shape: round cylindrical

Connection type: 8-32 UNC-2B female threaded rod-end, 2 x #10-32 UNF-2B threaded pneumatic ports

Mounting mode: Through-hole mounting

Material: Clear anodized Aluminium body, Hard Chrome-plated stainless steel piston rod, standard Buna-N seals, Duralon-lined fiberglass rod bushing, 303 stainless steel shaft, pre-lubricated with Magnalube-G grease

Port: 1/8" NPT.

Ambient and media temperature: -25 -250 deg F.

Stroke tolerance: +/- 1/64".

Learn More

FABCO-AIR - E-5-X - Pancake Cylinder.

Double-acting pneumatic cylinder actuator with single rod - Fabco-Air (Pancake original series) - 1/2" (B1/2") bore - 1/2" (S1/2") stroke - #8-32 UNC-2B female threaded rod-end - 2 x #10-32 UNF-2B threaded pneumatic ports - rated for -25...+250°F / -31...+121°C ambient - round cylindrical shape - clear anodized Aluminium body / hard Chrome-plated stainless steel piston rod / standard Buna-N seals - through-hole mounting - rated for 12psi...250psi

Port: 1/8" NPT.

Ambient and media temperature: -25 -250 deg F.

Stroke tolerance: +/- 1/64".

Bore size: 2.7mm 1/2" (B1/2")

Stroke length: /2" (S1/2")

Functions: Double-acting pneumatic cylinder actuator

Design: Single rod, rubber bumpers (both ends)

Pressure: 12psi min., 250psi max.

Shape: Round cylindrical

Connection type: #8-32 UNC-2B female threaded rod-end

2 x #10-32 UNF-2B threaded pneumatic ports

Mounting mode: Through-hole mounting

Material: Clear Anodized Aluminium body, Hard Chrome-plated stainless steel piston rod, standard Buna-N seals, Duralon-lined fiberglass rod bushing, 303 stainless steel shaft, pre-lubricated with Magnalube-G grease

Learn More

DYNAPAR / DANAHER - E1110001200 - Encoder, rotary. Incremental 1000-PPR. The Dynapar E1110001200 (also branded under Danaher Controls) is an ultraminiature Series E11 incremental optical rotary encoder. It is designed for commercial and light-duty industrial applications where space is limited. Technical Specifications • Resolution: 1000 Pulses Per Revolution (PPR). • Input Power: Supports 5 VDC TTL (135mA max) or 12/15 VDC CMOS (100mA max). • Physical Size: Size 11 housing with a 1.1-inch diameter. • Mounting: Servo or face mount configuration with a rugged all-metal housing. • Shaft: 1/8-inch Diameter Stainless Steel Shaft. • Output: Two-channel quadrature (A and B signals). • Environmental Rating: NEMA 12 / IP54 (dirt-tight and splash-proof). • Operating Speed: Up to 5,000 RPM. • Dimensions: 1.1" OD x 1.2" High • Enclosure: Rugged all metal housing. • Connections: 4 Wire plus braid shield. • Documentation: Complete with manufacturers wiring instructions and guidelines. Factory New Learn More

DYNAPAR / DANAHER - E1103601200 - Encoder, Rotary.

The Series E12 is a ultra-miniature incremental optical encoder packaged for commercial and lighter-duty industrial applications. Its small size is ideal for confined spaces with a resolution from 100 - 1024 PPR with an optional index.

Rugged Metal Housing - Sub-Compact 1.2” Diameter - Up to 1024 PPR with Optional Index

Incremental 360-PPR.

Input: TTL (+5VDC): 135mA max.

CMOS (+12 or +15VDC): 100mA max.

Rugged all Metal Housing.

Mount: Servo Face, 1/8" Stainless Steel Shaft. 5V STD.

Dimensions: 1.2" OD x 1.2" Body Length.

4 Wire plus Braid Shield.

Miniature Size 12.

Factory New Complete with Manufactures Wiring Instructions and Guidelines.

Learn More

Transmitter power board. For controllers. Learn More

Relay output board. For controllers. Note: Attached - Omron - G6B-2114P-US, 5VDC Dip relay. Learn More

Durant / Eaton - 5-T-8-1-AC - Lineal Counter Ratio 1.5:1 w/ Reset

Eaton's mechanical totalizers are available in a variety of heavy-duty configurations for applications when power is unavailable.

Accurate counting without need for power

5-Digit Lineal Counter, Ratio 1.5:1 with Thumbscrew Reset.

Black digits with white background

Dual shaft, top and bottom.

Base mount

UPC:782114011522

Dimensions: Height: 1.875 IN, Length: 3.375 IN, Width: 3.6875 IN

Weight:.5 LB

 

New

Learn More

9-pin D sub Extension cable Learn More

EATON DURANT - 57201-420 - Ambassador Series Batch Totalizer Productivity Monitor, 115VAC.

Display monitor with auto reason inputs.

Counter productivity monitor, 115VAC.

New with Manufacturers Instructions

Learn More