Process Control

NAMCO CONTROLS - RK93/2-501 - Infrared Scanner

2.5" - range modulated beam.

Supply: 24VDC.

PNP Output.

New, complete but without housing over PC board.

May also be listed as PK93/4-60(S).

Learn More

MillerEdge - ME151-4 - Guardian Mat.

Size: 14 Inches Square.

For Perimeter Guarding, Machine Guarding.

Outer Material: PVC. Thickness: 5/8.

Color: Black.

Lead Wire: 16 AWG, 10ft long.

Electrical Diagram: 4 Wire, N.O.

Electrical Requirements: 24 Volt, 1/2 amp AC or DC. CE TUV .

Minimum Sensitivity: 66 lbs (30kg) per 3-1/8 (80mm) dia.

Cycle Test: 1 Million.

Size: 14" square.

Temperature Range: -29C to +70C (-20F to 158F).

Fire resistant; Self Extinguishing.

More info: http://www.gatedepot.com/prod_miller/pdf/me151.pdf

Learn More

Measurement Technology - MTL5022 - Loop-Powered Solenoid Alarm Driver IIB, New The MTL5022 enables a device located in the hazardous area to be controlled by a switch or voltage change in the safe area. The MTL5022 can drive any certified intrinsically safe low-power load, as well as non-energy-storing simple apparatus such as an LED. Type: PLC Input/output Module LED indicator Yellow: status Input voltage 20 to 35V dc Hazardous-area output Minimum output voltage: 12.9V at 60mA Maximum output voltage: 24V from 133Ω Current limit: 60mA Maximum current consumption (with 60mA output) 115mA at 24V, typical 135mA at 20 to 35V dc, maximum Maximum power dissipation within unit 1.5W at 24V 2.1W at 35V Safety description 25V, 135Ω, 185mA, Um = 250V rms or dc Status: Discontinued New Learn More

MAGNET SCHULTZ OF AMERICA - S-06675 - NEW

24VDC, 11.0 Watt, Pull Solenoid Box Frame Solenoid

holding Force: 198 Oz

Maximum 5 oz at 0.5 inches stroke, Minimum 48 oz at 0.12 inch

52-0hm Coil - Continuous Duty

Box Frame Body: 1.622" x 1.441" x 1.752".

Additional Information: https://magnet-schultzamerica.com

Learn More

MAC250A-V1A1 PM-111DA(UNIV) 10-150-PSI 110/120V 7W PME-111DAAG - CE UL CSA - Uses Brad Harrison 5-pin connector [FORD wired] - 8 x 2.5 x 4.5" Learn More

Digital Output Module 16-point24VDC. Output Rating: 2Amp individual, 5A per group of 4, 12A per module. Learn More

HAYDON - AP35-500C - Motor, AC Timing

A Synchronous electric motor is an AC electric motor in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of AC cycles.

Product description: 120 VAC Cam Synchronous Motor Drive. Latching microswitch with a rating of 22 Amp 125-250VAC. Adjuststable Cam Time from 1 Second to 14 Seconds. Synchronous Motor is a Hayden 120 VAC 4 RPM with 2-way clutch unit. Unit also contains a 120 VAC DPDT Relay 5 Amp Contacts. 

1 - 13.8 seconds.

Supply Voltage: 120VAC 60Hz 5W.

Haydon Synchronous Motor Speed: 4RPM, 5W E15450 A2396A4.

Mechanical Mount: Panel Mount Frame on 2.8" Centers.

Unit is Complete with Relay, Motor, and SPDT 15Amp Microswitch

Connections: Octal 8 Pin Socket.

UL CSA Approved

Proudly Made in USA

New Old Stock

Learn More

GUARDIAN - TP4X16-I-24D Cylinrical Solenoid, DC.

Operation: Push.

Load Force: >6 oz. (6/116 N)

Holding Force: 22 Oz

Stroke length: 1.

Duty cycle: Intermittent.

Coil: 24VDC,  0.330 Amp, 72.7 Ohm.

Coil power: 8.3 Watt

Plunger config: round with 0.062" D push pin.

Mech: 3/8-32 thrd col w/brkt.

Body dim: 0.5"D x 2.023" long, overall 3.714" including internal pin. (12.7 X 51 mm) 

Weight: 0.1 lbs.

Connection: with 8", 24 AWG leads.

P/N: A420-066086-00

Learn More

GUARDIAN - A420-062396-00 Solenoid, AC.

Operation: Push.

Load force: >16 oz.

Stroke Length: 0.3.

Duty cycle: Intermittant.

Coil: 115VAC 0.3A 63 Ohms.

Plunger Config: Round w/.75" knob.

Mech: 4 8-32 holes.

Body Dimensions: 1.65"x1.45"x2.3".

Weight: 0.55 lbs.

Connection: 5" 18 ga. leads.

Learn More

GUARDIAN - A420-060761-00 Solenoid, DC.

Operation: open/close.

Load force: >48 oz.

Stroke length: 1.

Duty cycle: continuous.

Coil: 170VDC 0.109A 1560 Ohms.

Plunger config: round w/slot & hole.

Mech: 2 pairs of side holes.

Body dim: 0.95"x1.2"x1.95".

Weight: 0.27 lbs.

Connection: 6" 22 ga leads.

Note: Alt P/N: E120-54.

Learn More

GUARDIAN - A420-059001-00 Solenoid 

24VDC @ 250ma

Dimensions: 1-3/4" long x 1/2" x 1/4 plungerwith 1" pull @ 24VDC .

Unit measures 1-1/2" high x 1-3/4" deep x 1-1/8" wide.

Unit can be flush mounted by any of eight 3/16" holes.

New Old Stock

Learn More

EXOTIC VALVE ASS'Y - NEW 3...8bar 43.5...116psi1 Large, 7 Small input/outputs Learn More

General Electric - Electric Range Switch,  Rotary, Contacts: 5P.

Status: Discontinued

Contact Ratings: 120/240 VAC 16 Amp.

Note: Heavy Duty, Heater Control.

Contacts: 1/4" Male Quick Connect (QC) terminals.

Dimensions: 2" wide x 1-9/16" deep x 7/8" high.

May be interchangeable with other GE Appliance switches.

See detailed pictures for contact configuration and electrical ratings.

Other Uses - Electrical Heaters  

Under Writers Lab Approved

"Proudly Made in the USA"

New Old Stock

Learn More

EXPOSURE CONTROL FOR XEROX - POWER CONTROLLER Learn More

DISC INSTRUMENTS - Honeywell - PC62D-40-5 OPTICAL ENCODER

Made in USA

Used / As removed from Equipment

Learn More

ELECTRONICS CORP. OF AMER - 42MRL-5000 -  LED Source Photohead Sensor.

Status: Discontinued

Power Supply: Uses Type 42MTB base.

Switch Trans Beam

Output:Green Line, 25.4 mm - 171 m

(1 in - 560 ft) Sensing Distance

Response Time: 2.5mS

New Old Stock

Made in USA

Learn More

Danaher Controls – Dynapar - HA62509000101 - Encoder 3/8 SHT FLG MT 5-26VDC SD MT- New Description The Series HA25 is a rugged and reliable encoder for industrial motion applications. The proven design can be the mainstay for any automation project. Mechanical / Electrical Attributes Shaft / Bore Size (mm): 9.525 Connection Location: Radial Disk Material: Glass Flange Material: Aluminum Maximum Operating Speed (RPM): 6000 Connection Type: Connector Termination: 7 Pin MS Connector Shaft Type: Shafted Shaft / Bore Material: Stainless Steel Resolution (PPR): 900 Line Driver Type: 7273 Output Signal: Open Collector w/ 2.2K Ohm Input Voltage: 5-26 VDC Incremental Signal Format: Format A: A Leads B CCW; Index Width (180°) Gated to B' Reverse Polarity Protection: Yes Duty Cycle: 45-55% Short Circuit Protection: Yes Maximum Frequency Response (KHz): 100 Incremental Signals: A Environmental Attributes: Hazardous Area Rating Certification {[None] Minimum Storage Temperature (°C): -40 Noise Immunity Testing Specification: EN61326-1 Hazardous Area Rating: {hazardous_area_rating_certification=[None] Shock Resistance: 50G Humidity Non-Condensing (%): 98 Minimum Operating Temperature (°C): 0 Vibration Resistance: 20G Housing Protection Level: IP66 Maximum Operating Temperature (°C): 70 Maximum Storage Temperature (°C): 90 ROTARY ENCODER 3/8 SHT FLG MT 5-26VDC SD MT DYNAPAR HA62509000101 / HA62509000101, Factory New, INCREMENTAL ENCODER, SHAFTED ENCODER, SERIES HA25, SIZE 25 ENCLOSED, WITH SHAFT SEAL, GLASS DISK, 0900 PPR, FLANGE MOUNT, 3/8" SHAFT, 7 PIN MS CONNECTOR OR CABLE, SINGLE END, W INDEX, 5-26V IN, 5-26V OC W 2.2 KOHM PULLUP OUT, SIDE MOUNT CONNECTOR Made in USA Learn More

Current amplifier. Isolated current input. Input: 0mA to 20mA. Output: 0V to +5V (5VDC 30mA maximum). Package: 14 Pin module. Learn More

ROTARY ACTUATOR 15-120 DEGREES IN 15DEG INCREMENTS 0.867"[22mm] SQUARE SHAFT. 82M-7R63 Series General Info: Drive:Right - Ports:1/4 NPT - Pounds:10 [ kg:4.6 ] - Clamping Force:3680 In-Lbs [420nM] - Inductive sensing module with LED display - DE-STA-CO Modell Nr 8PW-082-1 Learn More

Comptrol - 80-163 - Control & Indicator Board.

Adjustible Blanking, Tension, Brake and Volts scaling.

New - Proudly Made in USA

Learn More

Comptrol - 80-158 - LVDT "Tensioncell" Control Board.

115/230V selectable input.

Provides regulated 24V 100mA for each of two LVDTs.

Amplification, filtering and summing of loadcell inputs.

Adjustable zero-out, gain, and for each of four meter outputs.

With manual.

Learn More

Comptrol - 79-213 - Rodwell Weight Calculator for ROD# 12556322.

PCB with Acopian Linear Regulated D15-03 AC to DC Power Supply.

AC-DC Dual Tracking Power Supply +/-5V, +/-10V, +/-15V, and +/-15V

Additional Information: https://www.acopian.com/dual-pcb-5-10-12-15-i.html

Proudly Made in USA

Learn More

Comptrol - 180-124-2 - Dual LVDT Dual Power Supply and Control Board.

0-10V Output. 

Has two Acopian Modular Power Supplies D15-03 and and 25E10A.

Used on #1 Super Calander

New Old Stock

 

Learn More

CHROMALOX - MF3300058V224A Heating Element, Immersion.

High Watt Density 

Power: 120V 3000W.

Mounting: Top Mouting Plate 2-1/2"sq.

Element is 10-1/2" Long.

Alternate: 8-935, TG1303L.

Applications: Injection Molding Machine and Coffee Maker Heater Element.

Learn More