Process Control

OPCON - 6141A-6501 Hardware. Swivel Mount Bracket.

Material: Aluminum

Part Number: 102385

For use with 11 Series Controls.

Operating Temperature: -40° to 158°F (-40° to 70°C)

Proudly Made in USA

Norgren Fluidics - 5VS-011 - Low Pressure Drop Indicator.

Provides a visual indication of level of pressure drop across units. Provides indication of condition of filter elements. Domed lens gives wide angle of visibility. Enable pressure drop in various parts of the system to be monitored.

10-32 female unf bottom rotowink pressure indicator

As Removed 

MAGNET SCHULTZ OF AMERICA - MSA- 06244 - S-0-6244 - R24X13 - Solenoid, DC.

Intermittent Duty Cycle

24 VDC Pull

14 Ohm Coil, 100 ounce.

Maximum 118.7 oz at .025 in., Minimum 92.5 oz at .025 in.

Primary Function Pull, Intermittent Duty Cycle.

Package: Cylindrical 1.5" OD x 2" Long.

Threaded Bushing Panel Mount.

Note: REGDON 24VDC-ID.

Proudly Made in USA

Logan Lundahl Instruments - DCU-A - 6-WIRE ULTRASONIC SENSORs with Adjustable Trip-point and Sensitivity.

The DCU series sensors use ultrasonic technology to provide a non-contact method of determining distance or level measurements.

Dimensions: 2" Square x 3.6" Long.

A Division of EZRA C LUNDHAL, INC 

Note: California-based Scientific Technologies Inc aquired Logan Lundahl Instruments.

New Old Stock - Made in USA

KEYENCE - AT-210 - Digital Contact Sensor Amplifier Control Module.

Status: Discontinued

Output Voltage: -0.5 ~ +0.5 V.

Output Impedance: 300 Ohm.

Supply voltage: DC12-24V, 10% ripple (PP) 10%.

Measurement Range: -5.0 to +5.0 mm-0.197" to 0.197"

Analog Output Voltage

Output Voltage:  -0.5 to +0.5 V

Impedance: 300 Ω

Resolution: 10 µm 0.39 Mil

Linearity: 0.8% of F.S.

Response: DC to 800 Hz (-3 dB)

Measurement Force: 0.28N*1

Temperature Characteristics: 0.03% of F.S./°C*2

Connection Cord Length: 3 m

Power Voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 %

Current Consumption: 50 mA or less

Ambient Temperature: 0 to +50 °C 32 to 122 °F

Relative Humidity: 35 to 85 % RH (No condensation)

Din Rail Mount

Dimensions: Width:7.00 (in)Height:6.00 (in)Depth:7.00 (in)

Weight: Approx. 100 g

Complete with a 4 conductor cable 9 foot, and attached 4 pin male micro connector.

Made in Japan

New

HYSON - T2B-3000X0.5 XB - Compact Height Nitrogen Gas Spring

HYSON gas springs are highly specified for use in metal stamping dies, injection molds and custom machines. 

• Life in excess of 100,000 stroke meters.
• Cartridge design for easy maintenance.
• Oil pipe prevents oil leaving the springs in a hosed system and helps maintain life of the springs.
• Secondary piston retaining ring offers extra protection.
• Compact height reduces die costs.

Cylinder 2175-PSI 

Stroke Length: 12.7mm (0.5")

Max 150-bar at 15-degrees C.

Gas N2 Nitrogen only.

Dimensions: Diameter 95.2mm, Height Min, 114.2mm, Full Stroke 127mm High

Weight 12 lbs.

KIT #HT2SK-3000

Additional Information: https://www.ajacs.com/metal-forming-catalog/hyson/nitrogen-gas-springs/113-t2-b-series/file

Made in Sweden

Factory New