Relays

Douglas Randall - A04A Relay, Solid State Relay.

Output: 120VAC 4Amp.

Input: 90-280VAC.

Package: module/hockey puck.

Made in USA

NSN  5945-01-314-9657

Learn More

Douglas Randall - CV1-NC - Relay, SSR.

Load: 3Amp 24-240VAC 60Hz.

Input: 4-10VDC.

Dimensions: 1.988" long x 1.244" wide x 0.663" high, with 4 solid leads.

Learn More

Relay, electro-mechanical. Mark II. 6PDT, Coil: 26.5VDC, 200 Ohms. Connections: solder hooks, Packaging: hermetically sealed. Learn More

36PDT-1Amp 24VDC "T-BAR" 111-Ohm Switch/Relay Plug-In Relay 1/8" QC Terminals Double marked C8501-106-1 Learn More

ELECTRONIC CONTROLS INC - 801-12C/12 - Power Relay, 12PDT-1Amp

The 800 series Dust-Tight Relay is protected against normal ambient dust conditions. It is designed for use in controlled environment such as test areas and network management centres. It is used for control interlock and indicator circuits. The connectors are a vital part of T-Bar switching technology. While T-Bar Connectors are recommended, all terminals of T-Bar relays and switches are solderable.

Product Range: 800 Series

Coil: 12VDC "T-BAR"

Coil Resistance: 49.1-Ohm

Mount: Panel

Switch/Relay Plug-In Relay

1/8" QC Terminals

Double marked C8501-011-2

Applications: Industrial, Computers & Computer Peripherals, Communications & Networking, or Machinear.

Alternate: Manufactured by OLYMPIC CONTROLS

Made in USA - New Old Stock

Learn More

Deltrol - KUP14DE5 - Relay, Power.

Input: DC.

Contacts: DPDT.

Contact Ratings: 10Amp.

Coil Voltage: 24VDC (10A, 240VAC 1/4HP, 120VAC).

Connections: Male 3/16" QC terminals, or solder.

Mech Mtg: PCB, or solder.

Packaging: Plastic enclosed, flange.

Note: Maybe replaced with KU5573-3, KU4818, KUP14DE1, (20552-82).

Used/Removed from equipment.

Learn More

Relay, control. Input: AC. Contacts: 1PDT. Contact Ratings: 10Amp. Coil Voltage: 24VAC. Connections: male 3/16" QC terminals. Packaging: Enclosed. Note: (10Amp 28VDC, 250VAC; 1/4HP 250VA, 125VAC; 1/3HP 240VA, 250VAC). NIB. Learn More

NEW 220VAC TDR SPDT-10Amp 250VAC 220VAC 8-OCTAL 6 TIME RANGES 0 SECONDS TO 10 HOURS Learn More

Heating element. For overload relays/contactors. 1.13 - 2.55Amp. Note: Alt P/N: 25-107-671-018. Note: Maybe replaced with equal by Allis-Chalmers. Learn More

Relay, timer. Contacts: DPDT. Contact Ratings: 10Amp. Coil Voltage: 115VAC. Connections: 8 solder hooks. Mech Mtg: Panel, flange 2.699" (68.5mm) square with 3" centers. Packaging: Enclosed, hermetically sealed. Size: 2.546" (65mm) D x 4.193" (106mm) high. Note: Probably 30 minutes. Motor 60 cycles. Time delay relay. Learn More

Relay, timer. Contacts: SPDT. Contact Ratings: 5Amp. Coil Voltage: 115VAC. Connections: 8 solder hooks. Mech Mtg: Panel, flange 2.699" (68.5mm) square with 3" centers. Packaging: Enclosed, hermetically sealed. Size: 2.546" (65mm) D x 4.193" (106mm) high. Note: 3 Second set. Motor and clutch 60 cycles. Time delay relay. Learn More

Contactors. Clear plastic cover, snap on/locking. Learn More

EATON - CUTLER-HAMMER - D50ER14 Expander 14 I/O 24VDC relay.

The Cutler Hammer D50 Series PLC Programmable Logic Control can be used for many different applications. The D50 PLC can also be a standalone controller that contains a Central Processing Unit (CPU) power supply, and input/output circuitry with terminals. No battery backup is needed for the 2K memory controller, and there is plenty of programming capacity for complex control schemes. The large number of timers/ counters relays, and data registers allow you to maintain the smallest PLC size PLC possible when you must upgrade to larger more expensive systems.

Status: Discontinued

Programmable Logic Controller (PLC)

D50 Series Module 14 I/O EXP Relay Output

I/O Module, 14 Point, 24 VDC

UPC:  78211400072

Alternates: D50ERI4, D50ERL4, D5OER14, D5OERI4, D5OERL4, DS0ER14, DS0ERI4, DS0ERL4, DSOER14, DSOERI4, DSOERL4 

New

Learn More

Contactor, coil. 110/120V 60 cycle, 110V 50 cycle. Learn More

Relay, I/O. Output: 3Amp 60VDC. Control: 18-32VDC. Learn More

CRYDOM - D1D12 Relay, Solid State Relay SSR.

SPST NO. Output: 100V 12Amp.

Current Rating: 12 A

Input Current: 28 mA

Isolation Voltage: 2.5 kV

Load Current: 12 A

Max Input Current: 28 mA

Max Input Voltage: 32 V

Operating Temperature: -20 to 80 °C

Max Output Current: 12 A

Max Output Voltage: 100 V

Max Supply Voltage (DC): 100 V

Max Surge Current: 28 A

Max Voltage Rating (DC): 100 V

Resistance: 130 mΩ

Termination: Screw

Throw Configuration: SPST

Voltage Rating (DC): 100 V

Dimensions: Depth 58.4 mm, Height 23 mm, Length 58.4 mm, Width 45.7 mm

Approvals: CE, UL, Lead Free      

REACH SVHC No SVHC, RoHS Compliant

Mount: Chassis, Hockey Puck.

Learn More

Relay, SSR. Output: 240VAC 25Amp. Input: 90-280VAC. Learn More

Relay, SSR. SPST NO. Output: ac linear controlled , 120/240VAC 15Amp. Input: 2-7VDC. Mount: chassis. Note: 15Amp analog in. Lead free. Rohs compliant. More info: http://www.crydom.com/en/Products/Catalog/p_cv.pdf Learn More

CRYDOM - 10LPCV2425 Relay, SSR. SPST NO.

Load: 0.10-25Amp 0-10VDC.

Mount: Panel/Chassis.

Termination: 0.25" quick connect.

Package: Module.

More info: http://www.crydom.com/en/Tech/crydom_us.pdf

Learn More

CRYDOM - H12WD4850 - Relay, SSR.

Circuit: SPST-NO (1 Form A).

Operating voltage: 480VAC.

Current: 50Amp.

Control voltage: 4-32V.

Output type: AC, zero cross.

Mount: Panel/Chassis.

Package: Hockey Puck.

Termination: screw.

New Old Stock

More info: http://www.crydom.com/en/Products/Catalog/h_12w.pdf

Learn More

Crouzet Corp - PB-24Q-1 - Relay Board.

Status: Discontinued

For I/O Relays, Quad Socket Board.

Learn More

Crouzet Corp - PB-24 - Relay, Circuit Board.

The PB24 I/O mounting rack can accommodate up to 24 single-channel Opto 22 standard
(Generation 1) I/O modules. The PB24 I/O mounting rack uses a 50-pin card edge connector for interface to computer parallel I/O ports via a 50-conductor ribbon cable.

I/O Board Module Rack

24 Position. (24-Channel).

LED Status Indicator for Each Channel

Dimensions: 476.3mm Length, 114.3mm Width, 55.9mm External Depth

50 Pin, 6-32 Screw Terminals  

Note: Double marked 57-105 Rev W and CPX-70.

New Old Stock.

Learn More

Relay, SSR. Input: 3-6VDC. Output: 3Amp 240VAC. I/O module. Note: Double marked OAC5A. Listed: UL/CSA. Learn More

Relay, power. Input: DC. Contacts: DPST and 2 NO. Contact Ratings: 3VDC. Pulls in about 2VDC. Coil Resistance: 1 ohm. Packaging: Open frame. Note: 280 Turns of #24 FMX. NIB. Learn More