Relays

1 Form C Sensitive military hybrid relaysDouble marked 8047-194 PULLS Cut Leads 1/4" Learn More

Relay, military. 12VDC. Package: TO-39-5 gold leads. Learn More

Relay, SSR. Control: 90-280VAC. Load: 20Amp 280VAC 400Hz. Case. Incapsulated module. Dimensions: 2.003" sqaure x 1.224" high. Contacts: screw. Note: solid state. New older stock. Learn More

PULLS 24VDC Crystal Can - Used DPDT-5A FCB-210-19 MILITARY RELAYS 5A DPDT CONTACTS:28VDC OR 115/200VAC 400Hz 5A POLARIZED TYPE 1 HERMETICALLY SEALED 450-ohm Learn More

ADJUSTABLE CURRENT Plug-In made in Findland. 660VAC IEC292 BS4941 VDE0660 CSA UL etc MAX 25Amps. Dial setting are full load current. Trip current is 120% of dial setting. Appears adjustable from 7 to 10 Amps. One NC and One NO contacts. 3-pin plug-in Learn More

0.12-0.18Amp Adj Current accessory 3-PIN Plug-In Learn More

6VDC Coil 3PDT-10Amp power Relay plastic enclosed 11-OctalRFE/Used Learn More

12VDC 10AMP 120AC/32DC RELAYS PCB MT Learn More

OVERLOAD RELAY THERMAL UNIT NEW IN MANUF BOX Learn More

Square D - B1.45 - Overload Relay Thermal Unit

B1.45, Square D, B Series, thermal overload submotor control, B B, rated for 1.03-1.14 amps, B1.45 suitable for use with thermal overload relays, magnetic motor starters & motor controls

Range of Product: B

Thermal Overload Type: Melting Alloy

Motor Tripping Class: 20

In Manufacturers Packaging

Learn More

Timer, adjustable. Module. Goes in series with relay coil. Learn More

2"Square module, ya put in 24 Alternating Volts and after a second and a half it'll switch 5mAmps to a whole amp of 120VAC. Versa-Timer Learn More

120VAC 8-pin Octal Plug-In - FIXED DELAY of 600-Seconds - Input voltage 120VAC must be applied before and during timing. Upon closure of the INITIATE switch, the output relay energizes, the time delay begins when the Initiate switch is Opened. 600 seconds +/-20% SPDT-10Amps 2.4"x1.7"x2.9" above socket. spec sheet included. Learn More

Switch selectable delays from 10Sec to 2.8Hours, in 10Sec increments via10-position DIP switch. Operating Voltage: 19 to 144V AC/DC. No first-shot effect. Load: 1A-max in series with module. Learn More

Square D Schneider Electric - 9001 TB - Contact Block.

Status: Discontinued

HH Series

2NO/2NC for Type-T Operators

600VAC, 120VDC, Heavy Duty.

Listed: UL/CSA.

New Old Stock

Alternate: 9001KA1, 9001 75523, 785901

Made in Ireland.

Learn More

Square D - 9999SX-12 - Contactors.

Square D by Schneider Electric

Current Rating: 3 A

Voltage Rating: 600V

Termination: Quick Connect

Auxiliary Contact

1 Normally Closed

Type S, Size 00-2. Series A.

RoHS Compliant

Learn More

Square D - 9999SX-12 - Contactors.

Square D by Schneider Electric

Current Rating: 3 A

Voltage Rating: 600V

Termination: Quick Connect

Auxiliary Contact

1 Normally Closed

Type S, Size 00-2. Series A.

RoHS Compliant

Learn More

Relay, socket. 7Amp 300V. Din rail. 14 Pin, miniature. Note: Hold down clips not included. Learn More

Timers, solid state. 1Amp max at rated voltage. Input: 24V. Mount: PCB. Case: module with five 1/4" male quick connect terminals. Dimensions: 2.025" square x 0.75" high. More info: http://www.ssac.com/catalog/TS601A01.pdf Learn More

SS TIMER OFF: 5-500MIN ON:10-1000-SEC 15a Learn More

Relay, reed. Package: 8 Dip. Learn More

Relay, power. Input: AC. Contacts: 3PDT. Contact Ratings: 10Amp. Coil Voltage: 115VAC. Connections: 11 octal. Mech Mtg: Plug-in. Packaging: Enclosed. New, older stock. Learn More

Clarostat Honeywell SKAN-A-MATIC - R40100 - Amplifier Relay with Power Supply.

Status: Discontinued

Complete photoelectric control
■ Open collector, relay, or solid state relay output
■ Output indicator LED
■ 15 turn sensitivity adjustment
■ Regulated DC power supply
■ May be wired LIGHT or DARK energize

115VAC input.

5 Amp Relay

11 Pin Plug-in Module. 

Operates with one reflective skanner or thrubeam pair, Not supplied.

Note: Used Removd from Equipment

Made in USA

 

Learn More

SSR HYBRID 5VDC in To 240VAC 10A OUT. HYBRID MEANS IT USES A REED RELAY TO TURN ON TRIAC Learn More