Relays

SSR AC Input, 90-140 VAC, 5 VDC Logic, Input: 120VAC, RFE/UsedOr equal Manuf, Opto 22, P&BThe IAC5 input module is used to sense ON/OFF AC voltage levels between 90-140 VAC. All AC input modules are designed with filtering on the input and a hysteresis amplifier for high noise rejection and transient-free clean switching. Each module provides up to 4000 volts (transient) of optical isolation between the field inputs and the logic output of the circuit. Learn More

OPTO 22 - 240D10 - Relay, Solid State.

Power Series relays provide 4000 volts of isolation between input and output, and offer zero-voltage turn-on and zero-current turn-off. They are UL and CSA recognized and are a CE component.

IC, NORMALLY-OPEN PANEL-MOUNT SOLID-STATE RELAY, 1 CHANNEL, M:HL048HD4.4

Input: DC.

Output: 240VAC 10Amp.

Input/control: 3-32VDC.

Connections: Screw Terminals.

Mech Mtg: panel.

Size: 1-3/4" wide x 2-1/4" deep x 7/8" high.

Optical Isolation Input to Output: 4,000 V

Turn-on Time: ½ cycle maximum

Turn-off Time: ½ cycle maximum

Operating Frequency: 25 to 65 Hz (operates at 400 Hz with six times off-state leakage)

Coupling Capacitance Input to Output: 8 pF maximum

DV/DT Off-state: 200 volts per microsecond

DV/DT Commutating: Snubbed for rated current at 0.5 power factor

More info: http://documents.opto22.com/0859_Solid_State_Relays_data_sheet.pdf

Proudly Made in USA

 Used/removed from equipment.

Learn More

OPTO 22 - G4ODC5 Relay, I/O.

Solid state relay.

Quad 5-60VDC, 5V logic.

Number of digital outputs: 1.

Signal input type: 4 to 8VDC.

Output current: 3Amp.

Supply voltage max: 8VDC.

Supply voltage min: 4VDC.

Used/removed from equipment.

More info: http://documents.opto22.com/0254_G4_Digital_DC_Outputs_data_sheet.pdf

Learn More

4PDT 24VDC RELAYS Learn More

Omron- G6B-1114P-US-12VDC - Relay, Power.

Input: DC.

Contacts: SPST NO.

Contact Ratings: 5Amp.

Coil Voltage: 12VDC (250VAC 5Amp 30VDC).

Coil Resistance: 720 Ohm.

Pickup/Dropout: 16.7mA 200mW.

Connections: 4 Pin.

Mech Mtg: PCB.

Dimensions: 21mm 10mm 10mm

Genuine Omron - New Old Stock

Note: Non-latching.

Learn More

Relay, reed. Package: 8 Dip in an IC molded type body. Low profile. Learn More

Miniature Low Signal Relays 5VDC NON-LATCH Learn More

TDR Power OFF-delay (with instantaneous reset) Relay Timed-out 2 Form C3 selectable time ranges over 1min to 10 min Plug in 240VAC 0-10 Min dial New 11-octal base Factory new manuf bx's. Nais/Panasonichttp://pewa.panasonic.com/acsd/timers/pm4h_4s/part-numbers Learn More

125VDC 3PDT-10A RELAY - NEWKUP STYLE Learn More

Relay, power. Input: DC. Contacts: 3PDT. Contact Ratings: 10Amp 125VDC (1/3HP 120VAC 10Amp, 1/2HP 240VAC 10Amp, 28VDC 10Amp). Connections: Male 3/16" QC terminals. Packaging: Plastic enclosed. Made in the USA. Learn More

Relay, dip. Input: DC. Contacts: DPDT. Coil Voltage: 24VDC. Coil Current: 2Amp. Coil Resistance: 2.88K Ohm. Connections: PC pins. Mech Mtg: PCB 8 Dip. Note: Listed: UL/CSA. Learn More

NAIS - AQV251 - Relay. Solid State Photo-Coupled Relay (Photorelay) SPST-NO (1 Form A) 6-DIP (0.300", 7.62mm) Mfr: NAIS Panasonic Electric Works Series: PhotoMOS™ AQV Part Status: Active Mounting Type: Through Hole Relay Type: Photo-Coupled Relay (Photorelay) Circuit: SPST-NO (1 Form A) Output Type: AC, DC Voltage – Input: 1.14VDC Voltage – Load: 0 V ~ 40 V Load Current: 500 mA On-State Resistance (Max): 1 Ohms Termination Style: PC Pin Operating Temperature: -40°C ~ 85°C Package / Case: 6-DIP (0.300", 7.62mm) Supplier Device Package: 6-DIP On-State Resistance: 1 Ohm. Voltage: Load 0 ~ 40 V. Package: 6 Dip. Additional Data: https://docs.rs-online.com/80c5/0900766b8009919d.pdf Learn More

Panasonic/NAIS/Aromat - JSM1-12V-5 - Relay, Power

Contact Material: Cadmium, Gold, Silver

Mount: PCB, Through Hole

Number of Pins: 5

Weight: 12 g

Temperature Range:  -40 °C to 85 °C

Coil Current: 53.3 mA

Coil Power: 640 mW

Coil Resistance: 225 Ω

Coil Type: Non-Latching

Coil Voltage (DC): 12 V

Contact Current Rating: 15 A

Max Voltage Rating (DC): 16 V

Packaging: Bulk

Power Consumption: 640 mW

Relay Type: Automotive

Release Time: 10 ms

Switching Capacity: 160 W

Switching Current: 15 A

Test Voltage: 1.5 kV

Throw Configuration: SPDT

Dimensions: Depth 16 mm, Height 16.4 mm, Hole Diameter 1.3 mm, Length 22 mm, Width 16.4 mm

Learn More

Relay, power. Input: DC. Contacts: DPDT. Coil Voltage: 12VDC. Coil Current: 10Amp. Connections: 6 PC leads. Mech Mtg: PCB. Packaging: Enclosed, plastic. Note: (10A 1/3HP 125,250VAC, 10A 30VDC). Learn More

Relay, power. Input: DC. Contacts: DPDT. Coil Voltage: 6VDC. Coil Current: 10Amp. Connections: 3/16" male QC terminals. Mech Mtg: Plug-in. Packaging: Enclosed, plastic. Note: (10A 1/3HP 125,250VAC, 10A 30VDC). More info: http://pewa.panasonic.com/assets/pcsd/catalog/hl-catalog.pdf Learn More

NAIS/Aromat - HC4-H-DC12V - Relay, power. Status: Discontinued, Input: DC. Contacts: 4PDT. Form: 4Form C, Contact Ratings: 5Amp. Coil Voltage: 12VDC. Coil resistance: 160 Ohm. Mech Mtg: plug-in. Packaging: Plastic, ice cube. Socketed General Purpose, Note: (5A 1/10HP 125V 250VAC / 3Amp 30VDC). TYPICAL APPLICATIONS 1. Factory automation equipment and automotive devices 2. Control panels, power supply equipment, molding equipment, machine tools, welding equipment, agricultural equipment, etc. 3. Office equipment, automatic vending machines, telecommunications equipment, disaster prevention equipment, copiers, measuring devices, medical equipment, amusement devices, etc. 4. All types of household appliance Learn More

Relay, power. Input: AC. Contacts: 3PDT. Contact Ratings: 7Amp. Coil Voltage: 115VAC/ 110V/120V. Mech Mtg: plug-in. Packaging: Plastic, ice cube. Learn More

Relay, reed. Input: DC. Contacts: SPST. Coil Voltage: 5VDC, 10VA. Connections: 8 Dip. Mech Mtg: PCB, low profile. Note: Thin-line, sensitive 89mw. New, bulk packaged. Learn More

12VDC DPDT DIP RELAYS Learn More

5-6VDC 14-Dip PCB mount Relays Factory new. Learn More

SPST-15A 115VAC Relays plastic enclosed pcb mt15Amp 1/3HP 125.250V 10Amp30VDCMax 10Amp when used with socket 110/120V Manuf in Japan Learn More

Relay, AC. Contacts: SPDT. Contact Ratings: 10Amp 1/3HP 125, 250VAC/10AMP30VDC / 15AMP 1/3HP 125, 250VAC. Coil Voltage: 240VAC. Packaging: Plastic enclosed. Note: 10Amp when used with a socket. Learn More

I/O Module 12-140VAC Output -=- 5VDC Logic-input 0.6" RFE/Used Learn More

I/O Module 12-140VAC Output -=- 5VDC Logic-input 0.6" RFE/Used Learn More