Relays

4-Pin PCB Mt 24VDC Relays Double marked 120-0000-000 EIA 1077 Learn More

Connector, Relay Socket

Compatible with numerous R10 Series Relays.

4PDT. (4 Pole Ice Cubes)

Style: Ice Cube.

Material: Nylon

Mount: Staggered PCB, PC Pins.

Note: Will fit R10 Series 4PDT Series Relays.

New Old Stock

Similar/Alternates: 2-1393143-5, 27E213

Learn More

Relay, special. Contacts: 1A. Coil: 33.4VDC 2000 Ohm. Connection: 8 solder hooks. Electrical conf: DPDT. Mech: 4 mounting tabs. Body: 19.6mm long including 8 solder hooks, 10mm wide and 5.5mm. Weight: 0.1 oz. Hermetically sealed MicroMechanical. Bourns. Learn More

Relay. Mounting: 10 dip PCB. Learn More

Relay, SSR. Input: AC. Contact Ratings: 8Amp 120VAC. 12VDC in. Connections: 1/4" male quick connects. Mech Mtg: Panel/chassis 4 hole mount with 2-7/8" centers. Learn More

48VDC 36PDT Magnetic latching relays. Enclosed Precious metal contacts - New Pulse to latch, pulse in opposite polarity to unlatch. Learn More

TAKAMISAWA - NA12W-K Relay

12VDC DPDT-2A

1028-Ohm

8-Dip PCB mount miniature relays

New

Learn More

1 Form C 5V Military sensitive relays. Double marked M28776/4-017L TO-5/8 gold. New J431T-5WL M28776/4-017L Learn More

T-BAR - 801-12C28 Power Relay. DC.

The 800 series Dust-Tight Relay is protected against normal ambient dust conditions. It is designed for use in controlled environment such as test areas and network management centres. It is used for control interlock and indicator circuits. The connectors are a vital part of T-Bar switching technology. While T-Bar Connectors are recommended, all terminals of T-Bar relays and switches are solderable.

Coil: 28VDC.

Coil Resistance:258 Ohms

Mount: Chassis

Electrical Configuration: 12P2T.

Uses gold contact for parts.

Used / Removed from Equipment

Old - Sold As Is old AS-Is.

Learn More

TELEDYNE - 640-4005 Relay, Solid State.

Connection: 4 pin.

Electrical conf: SPDT NO.

Mech: DIP.

Military.

Alternate: 2064898

NSN: 5945-01-119-5402

Learn More

Relay, SSR. Control: 3-8VDC (10VDC max) (Input 8Amp max). Load: 20Amp 90-280VAC 400Hz (output 0.1Amp min). Case. Encapsulated module. Dimensions: 2.003" sqaure x 1.224" high. Contacts: screw. Note: solid state. New older stock. Learn More

Relay, TDR. OFF-DELAY, 110VAC, 0-10 seconds, 1 Amp maximum load. Encapsulated solid-state package with 1/4-inch quick connect tabs.[External resistance of approximately 1 Meg required for maximum 10 second delay] Learn More

12VDC 20 POLE Single Throw Normally Open, precious metal plated bifurcated contacts. 140-ohm coil All in a shielded metal can with strange connector on end.weighs 1.5 pounds Learn More

Square D - Schneider Electric - NAX10 - Auxilary Contacts Normally Open

Inner Position SPDT, 600VAC, 30/60A

Used with Class-9421 Type N Disconnect Switches Series-A 

MANUF IN ENGLAND

UPC 10785901138577

New Old Stock

UL CSA

Learn More

Overload Relay Thermal Unit assembly - NEW - CU 80 Learn More

Relay, AC. Contactor: 15A. Coil: 110/120VAC. Electrical conf: 8P NO. Body: 12 x 4 W x 3.8"H. Latching. Coils: 186x S1 830A and S1681 S1 R30A 120VAC Class 8500 Type BHO-80 Series A. Alt P/N: 4449-91 223089OT. Learn More

Relay, timer module. 20A 230VAC 0-150 Second, ext res. On Delay. Fixed, non adjustable. Encapsulated solid-state package with 1/4-inch quick connect tabs. Note: [Will operate on 115 VAC]. Requires heatsink appropriate to any other 20A solid state relay. Learn More

SIGMA - C9179-X-6749 - Mini Open Frame 12V Form A, Normally Open The SIGMA C9179-X-6749 is a Mini Open Frame Relay with a 12V DC coil. It is commonly found as surplus electronic stock and is designed for basic switching applications. Technical Specifications • Type: Mini Open Frame Relay • Form A: A Form A relay configuration is a Single Pole, Single Throw (SPST), Normally Open (NO) switch that completes a circuit only when the coil is energized. It acts as a "make" contact, meaning it remains open (off) by default and closes (on) to allow current to flow when activated. • Coil Voltage: 11 – 14V DC (Standard 12VDC) • Coil Resistance: 780 Ohms • Contact Material: Silver Alloy • Contact: Configuration: Single Pole, Single Throw (SPST) • Contact Diameter is Approximately 0.0775” indicating low current. • Connections: Four Pin = 0.09” x 0.02” Quick Connect, PCB or Solder • Contact Form: Form A (Single Pole Single Throw, Normally Open) • Mounting: PCB or Two Mounting Holes • Construction: Open Frame, meaning the internal switching mechanism is exposed rather than sealed in a plastic or metal housing. • Approximate Dimensions: 0.96” Height Above PCB x 1.2” Width x 1.2” • Made in USA Learn More

Relay, reed. Input: DC. Contacts: SPST NO. Contact Ratings: 500mA. Coil Voltage: 5VDC. Coil Current: 500 Ohm. Mech Mtg: PCB. Packaging: 8 Dip. Learn More

SIEMENS - 3TF4010E-0A1S - Relay, AC.

Coil: 24VAC

Contacts: 3-Pole 20Amp with 1 N.O. auxiliary contact.

Mounting: DIN rail.

Size: 1.75 x 3.0 x 3.3"H.

Weight: 2 lbs.

Made in Germany

New

Learn More

SIEMENS - 3RT1517-1AB00 - Contactor

Siemens, Sirius line, type 3RT15, 4P, 3PH, 12A AC-3, 600V, 7.5HP @ 460V, complete with 24V 50/60Hz AC coil, 2NO/2NC contacts, screw & snap connection onto 35mm mounting rail, AC magnetic contactor, suitable for use with 3RT series motor control systems

Status: Discontinued

Family: Sirius

Type: 3RT15

3-Phase, 4 Pole 10Amp 24VAC

Contactor, AC-3, 5.5 kW / 400 V AC-1, 22 A, 24 V AC, 50/60 Hz 

2 NO + 2 NC, Size S00 Screw Terminal

Alternate: UPC 754554430966, SIRIUS 3RT2 

New Contactor.

Made in Germany

Learn More

Siemens Sirius 3RT1016-1BB1 is a very compact industrial motor starter contactor, suitable for starting 3-phase motors up to 3 HP @ 230 volts and 7.5 HP @ 575 volts. One normally-open auxiliary contact is included, and fused control. Dimensions: 106mmDeep x 45mmWide x 118mmHigh. Operating temperature: Min:-25 C Max:60 C. 3RH1911-1FA31 is a 15Amp Aux contact block mounted on top3-N.O. and 1xN.C. Plus a 3RT1916-1BB00 accessory varistor 24-48VAC/24-70VDC. Learn More

SIEMENS - VF4-55H11-C01 - Relay, DC Automotive.

Status: Discontinued

Input: DC.

Contacts: SPDT.

Contact Ratings: 40 Amp NO/30Amp NC.

Coil Voltage: 24VDC.

Connections: 1/4" QC male terminals.

Mech Mtg:

Mount Flange 0.956" x 0.746" wide.

Packaging: Plastic.

Size: 1.25" square x 1.547" high.

Learn More

Relay, 24VDC DPDT-10A Learn More